• International Journal of Control, Automation, and Systems
• /
• v.2 no.1
• /
• pp.39-54
• /
• 2004

We developed an automatic blood pressure control system to maintain the blood pressure of patients at a substantially low level during a surgical operation. The developed system discharges two functions, continuous feedback control of the mean arterial pressure (MAP) by a state-predictive servo controller and risk control based on the inference by fuzzy-like logics and rules using measured data. Twenty-eight clinical applications were made beginning in November 1995, and the effects of the automatic blood pressure control on the operation time and on bleeding were assessed affirmatively by means of Wilcoxon testing. This paper essentially reports the engineering details of the control system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1589-1592
• /
• 2003

Automatic grease lubricator of gear type was developed by mechanical design, analysis and test with products manufactured by rapid prototyping machine. The mechanism of gear driving was designed in similar to the watch mechanism and lubrication could be controlled by PCB circuit. The body of the lubricator was analyzed by stress analysis with different constructed angle. Digital mockup was analyzed and RP products were combined with PCB circuit and grease. RP products and injection moulding products were tested and compared for roughness and roundness, Finally the grease was drained out for testing the time.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.6
• /
• pp.9-18
• /
• 2000

This study includes noise automatic inspection system for washing machine auto-transmission one of modern home necessary. We effort to find and certificate sound noise source by sound power and sound intensity, and apply to frequency analysis in vibration related sound noise. still more we have been studying to data acquisition and programming for MS VisualBasic version 5.0. System component is below. 1) Pentium PC or data acquisition. 2) DSO for noise acquisition. 3)S/W for comparison and decision. 4) I/F Board for data communication. Wave form data through the DSO are converting to ASCII code data. The ASCII code through binary converting S/W. Finally we will making noise monitoring system and automatic inspection system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.543-545
• /
• 2008

시스템은 자발성, 자율성, 사회성, 반응성을 갖는 독립된 프로그램인 에이전트를 조합하여 구성되는 시스템으로, 일반 사용자에게 편리하고 자연스러운 메타포를 제공한다. 그러나, 개발자 측면에서는 에이전트 시스템에서 요구하는 각종 기능 및 제약규칙...

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.830-832
• /
• 1999

청주 LG산전 전력시험기술센터에는 LG산전에서 생산하고 있는 모든 전력량계를 관련규격에 따라 자동으로 시험할 수 있는 분리형 펄스 장치[1]와, 전력량계 회전 감지용 센서 및 카운터, 측정용 소프트웨어를 보유하고 있다. 기존 소프트웨어는 개발 당시 등록한 모든 전력량계에 한해서 관련규격에 따라 자동으로 시험하고 각 전력량계에 대한 개별 오차와 평균 오차, 개별오차와 평균오차와의 차이를 계산하고, 계산결과를 출력할 수 있는 기능들을 지니고 있었다. 그러나 기존 소프트웨어에는 새로운 시험환경을 등록할 수 있는 기능이 없었다. 따라서 G산전에서 생산되는 전력량계가 다양화됨에 따라 새로운 전력량계도 시험할 수 있도록 기존 소프트웨어를 수정하지 않을 수 없었다. 이러한 문제로 인해 LG산전에서는 기존 소프트웨어가 가지고 있는 문제점을 해결하고 데이터 관리 및 성적서 작성 기능과 같은 새로운 기능을 가진 소프트웨어를 개발하게 되었다. 따라서, 본 논문에서는 측정용 소프트웨어 개발 과정과 새로운 기능들 현장 적용 결과를 발표하고자 한다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.2
• /
• pp.40-47
• /
• 2008

It is known that the adhesive interface testing of the rocket motor using the ultrasonic wave is superior to the other testing methods about the ability to economical detect the defects. But, the signal analysis of the ultrasonic wave takes a lot of time and efforts because the time interval of the transmitted pulse and the received pulse is too short to separate the reflected signals due to the multi-layers of the rocket motor. The ultrasonic testing of rocket motor have only applied to the automatic system about extremely limited areas like the debond in adhesive interface between the motor case and the insulator. In this study the new technique to detect the debond between the liner and the propellant using the property of the resonance and the lamb waves instead of the existing ultrasonic testing was described.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.55-59
• /
• 2007

It is known that the adhesive interface testing of the rocket motor which using the ultrasonic wave iS superior to the other testing methods about the economically detectable abiliη of the defects. But, the signal analysis of the ultrasonic wave takes too much time and effort that the time interval of the transmitted pulse and the received pulse is too short to be separated the reflected signals because the structure of the rocket motor is multi-layers. The ultrasonic testing of rocket motor have been only applied with automatic system about extremely limited area like the debond in adhesive interface between the motor case and insulator. In this study the new technique to detect the debond between the liner and the propellant using the property of the resonance and Lamb waves was described as comparing the existence ultrasonic testing.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.8
• /
• pp.24-33
• /
• 2002

For mixed signal circuits that integrate both analog and digital blocks onto the same chip, testing the mixed circuits has become the bottleneck. Since most of mixed signal circuits are functionally tested, mixed signal testing needs expensive automatic test equipments for test input generation and response acquisition. In this paper, a new efficient BIST is developed which can be used for mixed signal circuits. In the new BIST, only faults on embedded resistances, capacitances and its combinations are considered. To guarantee the quality of chips, the new BIST performs both voltage testing and phase testing. Using these two testing modes, all the faults are detected. In order to support this technique, the voltage detector and the phase detector are developed. Experimental results prove the efficiency of the new BIST.

• International Journal of Quality Innovation
• /
• v.8 no.1
• /
• pp.137-153
• /
• 2007

Failure mode and effects analysis (FMEA) is a preventive technique in reliability management field. The successful implementation of FMEA technique can avoid or reduce the probability of system failure and achieve good product quality. The FMEA technique had applied in vest scopes which include aerospace, automatic, electronic, mechanic and service industry. The marking process is one of the back ends testing process that is the final process in semiconductor process. The marking process failure can cause bad final product quality and return although is not a primary process. So, how to improve the quality of marking process is one of important production job for semiconductor testing factory. This research firstly implements FMEA technique in laser marking process improvement on semiconductor testing factory and finds out which subsystem has priority failure risk. Secondly, a CCD position solution for priority failure risk subsystem is provided and evaluated. According analysis result, FMEA and CCD position implementation solution for laser marking process improvement can increase yield rate and reduce production cost. Implementation method of this research can provide semiconductor testing factory for reference in laser marking process improvement.

• International Journal of Quality Innovation
• /
• v.7 no.3
• /
• pp.58-69
• /
• 2006

This paper presents neural network-based recognition system for automatic light emitting diode (LED) inspection. The back-propagation neural network (BPNN) is proposed and tested. The current-voltage (I-V) characteristic data of LED from the inspection process is used for the network training and testing. This study selects 300 random samples as network training and employs 100 samples as network testing. The experimental results show that if the classification work is done well, the accuracy of recognition is 100%, and the testing speed of the proposed recognition system is almost one half faster than the traditional inspection system does. The proposed neural-network approach is successfully demonstrated by real data sets and can be effectively developed as a recognition system for a practical application purpose.