• 한국산업융합학회 논문집
• /
• 제23권2_2호
• /
• pp.219-224
• /
• 2020

This study is based on the principle of solar power system and fire breakout. The result of the survey indicates that a solar power system is vulnerable to fire due to lack of maintenance after the installation. Currently the national fire safety agency does not have standards and legal provisions for the installation and maintenance of solar power facilities. Therefore, it increases the risk of fire breakouts as well as possibility of electric shock for the firefighters during fire fighting. This results possible damages to the human and equipments. In this study is proposing an automatic fire extinguishing system to reduce the power generation of solar panels during fire breakouts. Also, propose an over load current alarm system and fire prevention measures for fire fighters. The results of this study will be used as basic data for further fire testing of solar power systems.

• 한국산학기술학회논문지
• /
• 제10권5호
• /
• pp.985-991
• /
• 2009

문법 기반의 테스트 케이스 자동 생성(GBTG) 알고리즘은 문법 G를 기반으로 G에 의해 수용되는 문장들의 집합 L(G), 즉 소프트웨어 테스트를 위한 테스트 케이스를 생성한다. 문맥 자유 문법으로 기술되는 대부분의 언어들은 순환적 성격을 가지며, 일반적으로 G에 의해 생성되는 집합 L(G)는 너무 커서 생성된 케이스들을 모두 실행시킬 테스트 대상으로 삼는다는 것은 현실석이지 못하다. 본 논문에서는 CFG에 의해 자동 생성되는 테스트 케이스의 집합의 크기를 통제하면서도 테스트의 주요 범위를 커버하기 위하여 문맥 자유 문법을 보강하는 문법외적 요소인 태그들을 개발하고 실험하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.1107-1112
• /
• 2002

An easy elevator originated is an opened system to compare an existing equipment, and learning efficient is high as a wiring that the sequence control circuit is on and off. The structure of an equipment to be controled from the first floor to the fifth floor is constructed by a lamp to express the function of the open-close of the door according to the cage moving, to express the mechanical actuation of the forward-reverse break and motor of load and of hand-worked control component of Push-Button S/W, L/S and Relay. In order to act of the elevator function that these components connected, designed the auto program and the sequence control circuit. Consequently the process that these(1~5steps) operated the cage with an auto program of the elevator and the sequence control circuit is controled by the step of forward and reverse that the L/S1~L/S5 of sensor adjust function let posit, by the adjustable S/W1~S/W5 of PLC testing panel and the S/W1~S/W5 which installed on the transparent acryl plate of a frame. In here, improved apparatus is the learning equipment of combined use to study the principle and the technique of the originated sequence control circuit and the auto program of PLC.

• 펄프종이기술
• /
• 제36권1호
• /
• pp.1-8
• /
• 2004

One of the most frequently used method for measurement of the degree of sizing (viz., hydrophobicity) is the Stockigt test. However, the Stockigt test was influenced by various factors such as dropping height, dropping amount, dropping speed and viewing angle. The resultant data of the sizing degree on the same specimen also varied according to different testers. Thus, the Stockigt test should be modified to be regarded as a highly reliable and reproducible standard method. For modifying the Stockigt test, it was required to quantify red coloration by reaction between 1％ ferric chloride and 2％ ammonium thiocyante during Stockigt testing. The cameras capturing the serial images during the red coloration process were the CMOS (Complementary Metal Oxide Semiconductor)-type and CCD (Charge Coupled Device)-type cameras. For measurement based on KS M 7025, the CCD-type camera must be used due to its high resolution, and on the other hand, for measurement based on Tappi Useful Method 429, the CMOS-type camera may be used owing to its low resolution. It was needed to covert the RGB values of a droplet image into HSV(Hue, Saturation, and Value) values because the human eyes are much closer to HSV than RGB. Among HSV values, the Hue value was accepted as the most reliable index consistent with the red coloration process by excluding the surrounding conditions such as light, tester's movement etc.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.109-113
• /
• 2004

Slitting device is equipment to separate spent fuel of 250 mm rod cut pellets and hull in order to supply required $UO_2$ pellets through the dry pulverizing/mixing device. For development of its device, We have analyzed slitting programs so that the existing device is modified an appropriate scale in the advanced spent fuel conditioning process. The results of the analysis, we added the automatic separation function of pellets and hull, After slitting. Also, we have concentrated on reducing the operation time so that the support and the body of a slitting blade could have been established in the single structure to be easily maintained. It is based on a design and manufacture of a testing device and we have performed an efficiency evaluation. We have analyzed the results of efficiency tests of the slitting device and get the specification of the slitting device. we complete the basic design of the slitting device by using of these data. Therefore, We apply to a basic data when manufacturing a slitting device.

• 디지털콘텐츠학회 논문지
• /
• 제13권4호
• /
• pp.491-500
• /
• 2012

본 논문에서는 RF 송수신 시스템 칩 내부의 저잡음증폭기(LNA)와 전체 송수신기 시스템 테스트에 효과적인 새로운 루프백(Loopback) BIST 구조를 제안한다. 제안하는 테스트기법은 외부 테스트장비(Automatic Test Equipment)를 사용하는 기존의 테스트기법과 달리 테스트 모드에서 칩에 내장된 베이스밴드 프로세서를 테스터로 사용하므로써 테스트인가와 테스트평가등을 효율적으로 수행할 수 있는 장점을 갖는다. 높은 주파수의 테스트 출력신호는 낮은 주파수로 변환하여 베이스밴드 프로세서에서 평가하게 됨으로써 테스트용이도가 향상될 수 있다. 제안하는 테스트기법은 ATE와 같은 외부테스트장비의 필요를 최소화하고 테스트 시간과 비용을 줄여 결과적으로 칩 제조비용의 절감을 가능하게 해준다.

• 마이크로전자및패키징학회지
• /
• 제6권3호
• /
• pp.1-7
• /
• 1999

본 연구에서는 900MHz대역 수신기용으로 선행 개발되어진 RF 칩세트를 장착한 RF 특성평가 보드를 개발하였으며, 환경평가시험을 수행하였다. 선행 개발되어진 RF-IC 칩에는 저잡음증폭기, 하향변조 주파수혼합기, AGC Amp, SW-CAP 필터 등을 포함하고 있으며, 이에 따른 정합회로와 RF/IF SAW 필터, 듀플렉서 필터 및 전원공급회로를 RF 특성평가보드에 첨가하여 제작하였다. 공급전원은 2.7에서 3.6V이며, RF 보드의 소모전류는 42mA로 나타났으며, 동작 주파수는 RF 입력이 925~960MHz으로 제작, 측정되었다. 측정결과 일반적인 900MHz용 디지털 이동통신단말기의 RF 수신특성과 유사하게 양호한 결과를 보였다.

• International Journal of CAD/CAM
• /
• 제6권1호
• /
• pp.105-115
• /
• 2006

Thickness is a commonly used parameter in product design and manufacture. Its intuitive definition as the smallest dimension of a cross-section or the minimum distance between two opposite surfaces is ambiguous for intricate solids, and there is very little reported work in automatic computation of thickness. We present three generic definitions of thickness: interior thickness of points inside an object, exterior thickness for points on the object surface, and radiographic thickness along a view direction. Methods for computing and displaying the respective thickness values are also presented. The internal thickness distribution is obtained by peeling or successive skin removal, eventually revealing the object skeleton (similar to medial axis transformation). Another method involves radiographic scanning along a viewing direction, with minimum, maximum and total thickness options, displayed on the surface of the object. The algorithms have been implemented using an efficient voxel based representation that can handle up to one billion voxels (1000 per axis), coupled with a near-real time display scheme that uses a look-up table based on voxel neighborhood configurations. Three different types of intricate objects: industrial (press cylinder casting), sculpture (Ganesha idol), and medical (pelvic bone) were used for successfully testing the algorithms. The results are found to be useful for early evaluation of manufacturability and other lifecycle considerations.

• 한국소음진동공학회논문집
• /
• 제21권4호
• /
• pp.365-373
• /
• 2011

This paper presents the dynamic response and the vibration characteristics for a rail-track supported by discrete springs and dampers. Recently, automatic conveyer system, rail-track, rack-master system demand the soundproof facilities and vibration suppression measures in order to satisfy the strict environmental standards. The equations of motions of the dynamic characteristics for a vibration suppression rail-track under a traveling mass were derived by Galerkin's mode summation method considering gravity, centrifugal force, Coriolis force, inertia force of the moving mass, transverse inertia of the rail-track. Also, numerical results were calculated by Runge-Kutta integration method. In order to investigate vibration characteristics and dynamic responses, modal testing and measurement of the responses of the rail-track were performed. Through the experiment and numerical simulations, numerical results have a good agreement with experimental ones.

• 한국멀티미디어학회논문지
• /
• 제1권1호
• /
• pp.109-119
• /
• 1998

본 논문은 형식기술기법으로 기술된 차세대지능망 응용프로토콜(INAP: Intelligent Network Application Protocool)로부터 추상시험스위트 (Abstract Test Suite) 자동생성에 대한 연구 결과를 기술한다. 시험 자동생성을 위해 RCP tour(Rural Chinese Postman tour) 개념과 UIO 시퀀스 (UIO:Unique Input Output Sequence) 개념을 응용하였다. SDL(System Description Language) 형식기술 기법으로 명세화된 INAP명세로부터 생성한 I/O FSM(Input/Output Finite State Machine)을 중간모델로 하여 UIO 시퀀스를 정의하고, 정의된 UIO 시퀀스를 RCP tour 개념과 결합하여 최적의 시험 시퀀스를 생성하였다. 본 논문에서는 또, 생성된 시험 스위트의 오류커버영역 예측방법을 제시하고, 마지막으로 표준화된 시험 표기법인 TTCN(Tree and Tabular Combined Notation)으로 생성된 시험스위트의 변환방법도 제시한다.