• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.1
• /
• pp.41-52
• /
• 2012

Recently, FlexRay was developed to replace controller area network (CAN) protocol in chassis networking systems, to remedy the shortage of transmission capacity and unsatisfactory real-time transmission delay of conventional CAN. FlexRay network systems require correct synchronization and complex scheduling parameters. However, because platform configuration register (PCR) setting and message scheduling is complex and bothersome task, FlexRay is more difficult to implement in applications than CAN protocol. To assist a network designer for implementing FlexRay cluster, this paper presents an analysis of FlexRay platform configuration register and automatic generation program of PCR. To demonstrate the feasibility of the automatic generation program, we evaluated its performance using experimental testbed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.93-102
• /
• 2011

In this paper we describe an efficient and easy to use network monitoring system which can identify network configuration automatically by means of capturing and analyzing the ARP broadcasting packets. After identifying network nodes, it gathers detail information of each node such as NETBIOS name and number of hop counts using ICMP and then shows subnet configuration with graphical method. This monitoring system also has a subset of intrusion detection system that can monitor any port scanning trial. With this automatic network configuration functions, it helps to lessen address keeping track overhead which is crucial for network monitoring so that it provides efficient network management.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.567-570
• /
• 2004

IPv6 enables stateless address configuration of hosts. Using this technique, a host in an IPv6 network can configure its address automatically with the help of a router. This eliminates the need for a server to manage the address dispatching state in conventional IPv4 networks. In this paper, we present a stateless configuration technique for routers. By expanding IPv6 stateless address configuration, a router can configure its network with the help of an upper level router, enabling a hierarchical, router-to-router network automatic configuration

• IEMEK Journal of Embedded Systems and Applications
• /
• v.8 no.2
• /
• pp.69-78
• /
• 2013

As vehicles become more intelligent for safety and convenience of drivers, in-vehicle networking systems such as controller are network (CAN) have been widely used due to increasing number of electronic control unit (ECU). Recently, FlexRay was developed to replace CAN protocol in chassis networking systems, to remedy the shortage of transmission capacity and unsatisfactory real-time transmission delay of conventional CAN. However, it is difficult for vehicle network designers to calculate platform configuration registers (PCR) and determine a base cycle or slot length of FlexRay. To assist vehicle network designers for designing FlexRay cluster, this paper presents automatic field bus exchange format (FIBEX) generation algorithm from CANdb information, which is de-facto standard database format for CAN. To design this program, structures of FIBEX, CANdb and relationship among PCR variables are analyzed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.3
• /
• pp.548-556
• /
• 2018

NMS (Network Management System) is a system that is used for a small or large networks management. As the size of network becomes larger and the configuration information become complicated, it becomes more difficult to grasp the network status and it takes much time to diagnose the failure of the network equipment. In this paper, to alleviate the problems of NMS we implement web-based network topology automatically using JavaScript, Python, HTML5 based TWaver. The detailed implementation of the system include the automatic collection of the connection information based on the equipment information registered in the NMS system, the implementation of the web-based network topology and the remote fault diagnosis. In the network topology, we can expect to improve the quality of the NMS system through structured data management by adding the configuration management, fault management and performance management functions in a comprehensive manner.

• Journal of KIISE:Information Networking
• /
• v.32 no.1
• /
• pp.100-109
• /
• 2005

A Mobile Ad-Hoc Network (MANET) supports a multi-hop wireless network without any prepared base station (BS). The MANET is capable of building a mobile network automatically without any help from DHCP servers for address allocation or routers to forward or route messages. Many routing protocols have been proposed for the MANET, but these specify the most optimized or shortest path from a source to a destination, and they assume that nodes are pre-configured before communication. To make up for this, address allocation algorithms, such as MANETConf [1] and prophet address allocation algorithm [2], have been proposed. Especially, MANETConf proposes address allocation algorithm with duplication address check. In this paper, we present a dynamic node configuration protocol based on 2-tierd hierarchical network architecture for mobile ad-hoc network, modified from [1]. Especially, it reduces the number of broadcast message exchange between nodes when a new node somes into a network, which lessens network overhead, remarkably. This protocol is based on two-tired structure, and it ensures address allocation with simple duplication address defection mechanism.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.913-922
• /
• 2020

In this paper, we propose a LoRa communication module using the LoRa RF module of Murata Electronics is designed to configure the IoT digital meter remote meter reading and a method of configuring a remote meter reading network by collecting multiple meter data in a DCU (Data Concentrate Unit) to configure a network with LoRaWAN. The developed system can be installed more easily and economically in the network configuration than the existing system by allowing the meter to be directly connected to the network or matched with a DCU to connect to the network according to the configuration of the consumer. The developed system was constructed using a digital water meter as an example, but it can also be applied to remote meter reading of the metered values of other meters such as electricity, water, gas, hot water and calorie meters. The main development contents are the design, configuration, and construction of digital meters, LoRa modules and DCUs, and how to connect the LoRaWAN network and transmit meter data to the server. By networking these devices, the system is configured, and the actual LoRaWAN communication is tested and the result is shown.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.893-900
• /
• 2019

This paper deals with the analysis of SON (Self Organization Network) technology in LTE networks. SON is a unique LTE feature compared to previous cellular systems UMTS and GSM, and is a cost-effective tool for achieving the best performance in a changing environment. In addition, SON has the function of automating the settings of the network, enabling centralized planning and reducing the need for manual tasks. SON is largely divided into three categories: Self-Configuration, Self-Optimization, and Self-Healing. Each large category has a detailed description, and all the technologies in each category come together to complete the technology called SON. In this paper, we analyzed intensively about ANR among the techniques of Self-Configuration in each of the three categories.

• Phonetics and Speech Sciences
• /
• v.13 no.1
• /
• pp.45-51
• /
• 2021

End-to-end (E2E) automatic speech recognition (ASR) has achieved promising performance gains with the introduced self-attention network, Transformer. However, due to training time and the number of hyperparameters, finding the optimal hyperparameter set is computationally expensive. This paper investigates the impact of hyperparameters in the Transformer network to answer two questions: which hyperparameter plays a critical role in the task performance and training speed. The Transformer network for training has two encoder and decoder networks combined with Connectionist Temporal Classification (CTC). We have trained the model with Wall Street Journal (WSJ) SI-284 and tested on devl93 and eval92. Seventeen hyperparameters were selected from the ESPnet training configuration, and varying ranges of values were used for experiments. The result shows that "num blocks" and "linear units" hyperparameters in the encoder and decoder networks reduce Word Error Rate (WER) significantly. However, performance gain is more prominent when they are altered in the encoder network. Training duration also linearly increased as "num blocks" and "linear units" hyperparameters' values grow. Based on the experimental results, we collected the optimal values from each hyperparameter and reduced the WER up to 2.9/1.9 from dev93 and eval93 respectively.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2005.11a
• /
• pp.87-90
• /
• 2005

The Intelligent Home provides convenient and comfortable living environment by performing automatic control, heating and air-conditioning, ventilation, home appliances control, home robot control, energy management, visitor management security management, internet, heath state monitoring, etc. through wired/ wireless network and device in the household. Along with the presentation of the features of economical broadband power line communication in the network configuration for new and old houses, its improvement method is proposed.