• Journal of Biomedical Engineering Research
• /
• v.37 no.6
• /
• pp.209-214
• /
• 2016

Binaural hearing aids with a voice transmitter have been widely used to enhance sound quality in noisy environment. However, this system has a limitation on sound-source localization. In this study, we investigated automatic directional-gain control method using geomagnetic sensors to provide directional information to binaural hearing aid user. The loudness gains of two hearing aids were differently controlled based on the directional information between a speaker position and a viewing direction of hearing aids user. This relative directional information was measured by two geomagnetic sensors on hearing aids user and a speaker. The results showed that the loudness gains were accurately controlled and could provide directional information based on the cue of interaural level differences.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.1
• /
• pp.49-54
• /
• 1995

Three types of floating-type automatic inlet were developed for the purpose of reduc- ing farmer's working hours required for water management and saving irrigation water. The point of automation is to use a float within the inlet which is floated and sinked by the ponding depth of paddy field, Thus opens and closes the control gate of irrigation. Suitability of each inlet may depend on production cost, applicability to paddy field condi- tions, and feasibility to farmers, etc. The first model was composed of three parts : chamber for irrigation control gate, chamber for float controlled by ponding depth, and connection bar between the two parts. It was designed to open and close the control gate gradually as the ponding depth drops and rises to a certain level. The second model was designed to improve the weak point of the first model which is the imperfect-closing of gate when it approaches to the end of ir- rigation. A switch-spring was equipped above the connection bar for perfect opening and closing of gate when the ponding depth reaches to a certain level. The third model was designed by combining the two chambers, that is, cut in halves the inlet volume of the above two models. Magnets were equipped above the float for perfect opening and closing gate. The functional experiment for three developed inlets was successfully carried out and the rating curves were derived.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2002.11a
• /
• pp.151-156
• /
• 2002

The output voltage of Synchronous Generator is regulated constantly by field current control in excitation system. A synchronous generator is equipped with an automatic voltage regulator(AVR), which is responsible for keeping the constant output voltage under normal operating conditions about various levels. High frequency PWM converter (Current Mode Control Buck converter) type excitation system for synchronous generator is able to sustain output voltage level properly when the fault condition happened. This paper deals with the design and evaluation of the excitation system controller for a synchronous generator to improve the steady state and transient stability. The simulation and experimental results show that the proposed excitation system is improve the respons time by the AVR(automatic voltage regulator) of 50kW synchronous generator that is applied the current mode control excitation system.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2579-2581
• /
• 2005

The Tidal Power Plant Management is defined to devise the optimum operating plan and control generating output automatically to obtain maximum production by using adaptive control method. The method to use tidal level observation results is suggested as two(2) kinds of manner, that is the two(2) layer design method by power model simulation and power automatic control.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.94.1-94
• /
• 2001

Arc sensor gives important groove information during welding. Automatic seam tracking control system with arc sensor has significant characteristics such that bead formation is given as decentralization of penetration and formation of concave bead profile and that a turning point of transverse weaving with constant arc length control is decided whether or not torch height reaches to a specified setting level. Furthermore, the rotating action of the arc prevents hanging of weld bead and forms flat bead surface under high speed welding condition. The variation of groove and deposition area can be detected from the trace of weaving. The area and width of weaving trace has close correlation with the area of groove and deposition. In this paper, main object of this system is to realize an adaptive microprocessor based controller ...

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.132-141
• /
• 1999

No. 1 PL(Pickling Line) and No. 1 TCM(Tandem Cold Rolling Mill) at Pohang works started up in 1977 and have been operating successfully keeping high productivity for productivity thin gauge sheat such as BP, CR and silicon steel. On the other hand, customer's requirements of quality level are rasing higher continuously, so that Pohang works has combined and revamped No. 1 PL and No. 1 TCM in order to improve labor productivity, thickness accuracy and shape control capability, and so on in the period of 1977∼1999. This paper introduce the applied facilities, technologies and recent operations after revamping.

• 유공압시스템학회:학술대회논문집
• /
• 2010.06a
• /
• pp.7-11
• /
• 2010

Various transmission technologies have been developed to satisfy environmental issues recently. Especially, the technology of the proportional control solenoid valve (PCSV) to ensure high level performance by electronic control has been studied. This study builds an analysis process for designing of the PCSV and characteristic predictions.

• Journal of Biomedical Engineering Research
• /
• v.31 no.5
• /
• pp.385-394
• /
• 2010

Automatic gain control(AGC) is used in hearing aids to compensate for the hearing level as to reduced dynamic range. AGC is consisted of the main 4 factors which are compression threshold, compression ratio, attack time, and release time. This study especially focus on each individual need for optimum release time parameters that can be changed within 7 certain range such as 12, 64, 128, 512, 2094, and 4096ms. To estimate the effect of various release time in AGC, twelve normal hearing and twelve hearing impaired listeners are participated. The stimuli are used by one syllable and sentence which have the same acoustic energy respectively. Then, each of score of the word recognition score is checked in quiet and noise conditions. As a result, it is verified that most people have the different best recognition score on specific release time. Also, if hearing aids is set by the optimum release time in each person, it is helpful in speech recognition and discrimination.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.9
• /
• pp.951-959
• /
• 2013

In order to improve the speed performance of the direct drive mechanical systems, a comprehensive analysis of the velocity ripples of blushless DC motors should be required. Every motor has a certain level of torque ripples when it generates power, and the generated torque ripple also makes the velocity ripples in the final output stage in speed control system. In this paper, a novel algorithm for reducing velocity ripples is proposed based on the modeling of torque ripples for BLDC motors. Various algorithms have been made for torque ripples, but usually they should be installed inside the amplifier logic, result in the difficulties of flexibility for various kinds of torque ripples. The proposed algorithm was developed for being ported in the controller not the amplifier, and it has the capability of the automatic compensation adjustment. The performance of the proposed algorithm was verified by effective simulations and experiments.

• Proceedings of the CALSEC Conference
• /
• 2005.03a
• /
• pp.62-67
• /
• 2005

In traditional approach, enterprise-wide consistent security policy enforcement for applications is very difficult task. Therefore, industry is now moving towards new unified enterprise application security concept that consist of centralized authentication and authorization mechanism. The eXtensible Access Control Markup Language (XACML); an XML-based standard defined by OASIS, is most suitable choice which can support centralized, role based, context aware access control mechanism. It is designed to provide universal standard for writing authorization policies and access control request/response language for managing access to the resources. This paper includes a brief overview on XACML and discusses its benefits, limitations and a data flow process. We propose a new generic access control architecture that supports enterprise wide centralized application level access control mechanism using XACML. The other benefits which can be achieved through this architecture are, reduce adnministration cost and complexity, support of heterogeneous computing platforms, centralized monitoring system, automatic fail over, scalability and availability, open standard based solution and secure communication.