• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.7
• /
• pp.121-127
• /
• 2016

We propose a algorithm to calculate power factor of fundamental waveform in an environment where the voltage and current have been distorted by harmonics. In the proposed power factor computation algorithm, voltage and current are converted to rotating DQ reference frame, and power factor is calculated from active power and reactive power. We compare the proposed method with the conventional power factor measurement method as mathematically. In a condition that voltage and current are distorted by harmonics, the proposed method accurately measure the power factor of fundamental wave, and it is confirmed by simulation using MATLAB. If the proposed power factor measurement method is applied to an automatic power factor control system, a power factor compensation performance can be maximized in harmonic distortion environment. As a result, it is possible to reduce electricity prices, reduce line loss, increase load capacity, ensure the transmission margin capacity, and reduce the amount of power generation.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.125-130
• /
• 2001

Experimental and analytical researches have been conducted on the twin-fluid atomizers for better droplet breakup during the past decades. But, the studies on the disintegration mechanism still present a great challenge to understand the drop behavior and breakup structure. In an effort to describe the aerodynamic behavior of the sprays issuing from the internal mixing counter-swirling nozzle, the spatial distribution of axial (U) radial (V) and tangential (W) components of droplet velocities are investigated across the radial distance at several axial locations of Z=30, 50, 80, 120 and 170mm, respectively. Experiments were conducted for the liquid flow rates which was kept constant at 7.95 g/s and the air injection pressures were varied from 20 kPa to 140 kPa. Counter-swirling internal mixing nozzles manufactured at angles of $15^{\circ},\;30^{\circ},\;45^{\circ}$ and $60^{\circ}$ the central axis with axi-symmetric tangential-drilled holes was considered. The distributions of velocities and turbulence intensities are comparatively analyzed. PDPA is installed to specify spray flows, which have been conducted along the axial downstream distance from the nozzle exit. Ten thousand of sampling data was collected at each point with time limits of 30 second. 3-D automatic traversing system is used to control the exact measurement. It is observed that the sprays with all swirl angle have the maximum SMD for on air injection pressure of 20 kPa and 140 kPa with centerline, respectively. The nozzle with swirl angle of $60^{\circ}$ has vest performance.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.3
• /
• pp.194-202
• /
• 2003

To convert printed images into electronic ones automatically, it requires region analysis of document images and character recognition. In these, regional analysis segments document image into detailed regions and classifies thee regions into the types of text, picture, table and so on. But it is difficult to classify the text and the picture exactly, because the size, density and complexity of pixel distribution of some of these are similar. Thu, misclassification in region analysis is the main reason that makes automatic conversion difficult. In this paper, we propose region analysis method that segments document image into text and picture regions. The proposed method solves the referred problems using one dimensional median filter based method in text and picture classification. And the misclassification problems of boldface texts and picture regions like graphs or tables, caused by using median filtering, are solved by using of skin peeling filter and maximal text length. The performance, therefore, is better than previous methods containing commercial softwares.

• The Journal of Engineering Geology
• /
• v.2 no.2
• /
• pp.113-130
• /
• 1992

Groundwater in crystalline basement is controlled primarily by tectonic fractures. It is evident that the delineation of the heavily faulted area and/or fractures deeply developped should be considerable value in deep-seated low enthalphy geothermal water. Electrical and electromagnetic methods have effectively been employed to map hydraulic faults and shear zones for groundwater exploration. In this study VLi; dipoledipole resistivity, controlled source audio~frequency magneto-telluric(CSAMT) and magnetic methods were applied in the Bomun resort area, adjacent to Kyongju city, southeastern part of Korea. The integrated geophysical tools employed in this experiment can be manifested themselves as: 1. Magnetic high for granite intrusions which is more favorable for geothermal gradient increase in depth. 2. VLF cross-over trends for mapping linear shallow conductive fractures and shear zones. 3. Dipole-dipole resistivity distributions for the deep-seated(less than 500m in depth) fractures and shear zones. The dipole-dipole resistivity field data were inverted to the true resistivity distribution with two-dimensional automatic inversion program based on the finite-difference method. 4. CSAMT provides an efficient way of delineating fractures and fault zones if the depth is greater than about 500m.

• Journal of the Korea Furniture Society
• /
• v.16 no.1
• /
• pp.53-69
• /
• 2005

This research has a significant meaning to observe and understand the historical condition of a furniture industry and the characteristics of Korean home furniture's formation, ability, skill and materials from 1980s when there were an economic growth and a historical development of Korean home furniture occurred to present days. During 1980s, there was an automatic system available and has enforced and settled the standards on its quality and price in a furniture industry. Also, there was a big trend of black furniture as well as an entrance of corporation and high glossy furniture due to technical cooperation from Europe. In 1990s, there was an entrance of furniture which various techniques was applied due to a high development of the materials and skills, and also various sizes of height and weight and enlargement of acceptance function using highly-technological hardware. After 2000 and now, pro-environmental products is embossed in the Korean home furniture where they added a public issue which is the concept of well being, and A.I and sub material has been pro-environment. There also was a natural unity between nature and technology because of increased usage of trees with its natural patterns, metals, and glasses. For the future development of home furniture design, This problem should be promptly recognized that current home furniture designs are now on the verge of being lack of originality and are just following the market demand and recent trend as it is. Then, there should be a development of its specialized, detailed, unique design as well as a development of advanced materials, production management, distribution, and so on, and carrying out a diversified research continuously. There also should be a systematic education, which is necessary for training specialists to lead the Korean home furniture design industry as well as preparing a basic level for the future without a negligence.

• Korean Journal of Clinical Laboratory Science
• /
• v.44 no.1
• /
• pp.1-6
• /
• 2012

Hepatitis A virus (HAV) is an epidemiologically important virus with a worldwide distribution. It causes acute hepatitis in humans. HAV infection is often subclinical or asymptomatic in children; however, symptomatic acute infections become more common with age. In this study, we investigated the prevalence of anti-HAV among hospital workers in Jeonbuk province. 447 (127 males, 320 females) persons were included in the study from January to June, 2011. Anti-HAV (total and IgM) in the sample serum was measured by VIDAS Hepatitis A (bioMerieux, France), and IgM positive samples were tested in terms of their serum alanine aminotransferase (ALT) levels by a HITACHI 7600-010 automatic analyzer (HITACHI, Japan). The overall prevalence of total anti-HAV was 45.9% (205/447), and rate for males (60.6%) was higher than that for females (40%). According to the age group, the prevalence rates of total anti-HAV were 20% (1/5) in those under 20 years old, 11.3% (18/160) in those 20-29 years, 49.7% (71/143) in those 30-39 years, 86.5% (83/96) in those 40-49 years, 92.9% (26/28) in those 50-59 years, and 40% (6/15) in those over 60 years old. The total prevalence of anti-HAV IgM was 0.8% (4/447), and rate for males (1.6%) was higher than that for females (0.6%). Through this study, we determined the prevalence of anti-HAV among hospital workers in Jeonbuk province. The prevalence of the HAV antibody overall was low in hospital workers under 40 years old and in those over 60 years old. Therefore, an improvement in sanitary conditions and hygiene and vaccinations against HAV in this population are recommended.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.613-622
• /
• 2000

Watering operation for oyster mushroom growing houses is regarded as drudgery and time consuming farm operation for growers. Most of mushroom growing beds in oyster mushroom growing houses are designed as two-row with four floor beds, therefore the watering and ventilation between the bed floors are much difficult for farmers because of its structural design. The study aimed to reduce the watering operation and improve the mushroom growing environment through the humidification and air supply on mushroom growing beds. Results showed that appropriate size of nozzle is between 0.8~0.5ml/s for the humidification and higher than the 2.0ml/s for the watering. The optimum water supply pressure was regarded as between 1.0~2.0MPa and the uniform distribution of droplet on the bed showed on air flow speed of 14m/s. The prototype was equipped with twin nozzle with. the humidification nozzle of 0.85ml/s and watering nozzle of 5.0ml/s, and the air blast fan with the air speed of 10m/sec in each air spout. In the field test in a practical scale mushroom growing house, it was well operated dependant on the set desire by a electric control unit. The machine can be practically used as air blast watering and air blast humidification for oyster mushroom growing farms without manual.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.654-660
• /
• 2012

The goal of this paper is to calculate flood elevation by applying temporal distribution of rainfall through HEC-RAS(Hydrologic Engineering Center's River Analysis System) and to automatically create areas of flooding by a user-defined spatial model based on GIS using calculated values of flood elevation and detailed data of topography. Accuracy of topographic data is the most important factor because of deeply changing analysis results of flooding areas of a river. Therefore, this paper suggests a method of attributive and spatial data construction based on the GIS using UIS(Urban Information System, river-related reports, and hydrologic information. Also, we implement an expression system to provide analysis results extracted from the proposed model.

• Atmosphere
• /
• v.17 no.4
• /
• pp.339-348
• /
• 2007

Global Environment Laboratory at Yonsei University in Seoul ($37.57^{\circ}N$, $126.95^{\circ}E$) has carried out the ozone layer monitoring program in the framework of the Global Ozone Observing System of the World Meteorlogical Organization (WMO/GAW/GO3OS Station No. 252) since May of 1984. The daily measurements of total ozone and the vertical distribution of ozone amount have been made with the Dobson Spectrophotometer (No.124) on the roof of the Science Building on Yonsei campus. From 2004 through 2006, major parts of the manual operations are automated in measuring total ozone amount and vertical ozone profile through Umkehr method, and calibrating instrument by standard lamp tests with new hardware and software including step motor, rotary encoder, controller, and visual display. This system takes full advantage of Windows interface and information technology to realize adaptability to the latest Windows PC and flexible data processing system. This automatic system also utilizes card slot of desktop personal computer to control various types of boards in the driving unit for operating Dobson spectrophotometer and testing devices. Thus, by automating most of the manual work both in instrument operation and in data processing, subjective human errors and individual differences are eliminated. It is therefore found that the ozone data quality has been distinctly upgraded after automation of the Dobson instrument.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.1
• /
• pp.17-29
• /
• 2013

Long-Term Hydrologic Impact Assessment (L-THIA) model which is a distributed watershed model was applied to analyze the spatial distribution of surface runoff and nonpoint source pollutant loading from Imha watershed during 2001~2010. L-THIA CN Calibration Tool linked with SCE-UA was developed to calibrate surface runoff automatically. Calibration (2001~2005) and validation (2006~2010) of monthly surface runoff were represented as 'very good' model performance showing 0.91 for calibration and 0.89 for validation as Nash-Sutcliffe (NS) values. Average annual surface runoff from Imha watershed was 218.4 mm and Banbyun subwatershed was much more than other watersheds due to poor hydrologic condition. Average annual nonpoint source pollutant loading from Imha wateshed were 2,295 ton/year for $BOD_5$, 14,752 ton/year for SS, 358 ton/year for T-N, and 79 ton/year for T-P. Amount of pollutant loading and pollutant loading rates from Banbyun watershed were much higher than other watersheds. As results of analysis of loading rate from grid size ($30m{\times}30m$), most of high 10 % of loading rate were generated from upland. Therefore, major hot spot area to manage nonpoint source pollution in Imha watershed is the combination of upland and Banbyun subwatershed. L-THIA model is easy to use and prepare input file and useful tool to manage nonpoint source pollution at screening level.