• 제목/요약/키워드: Automatic Alarm System

검색결과 115건 처리시간 0.027초

Performances of Various AGC Algorithms for IEEE802.11p WAVE

  • Jin, Seong-Keun;Yoon, Sang-Hun;Shin, Dae-Kyo
    • 전기전자학회논문지
    • /
    • 제18권4호
    • /
    • pp.502-508
    • /
    • 2014
  • This paper has reviewed the performances of various AGCs which can be adopted in IEEE802.11p modems. IEEE802.11p, a high speed mobile communication standard for vehicles, requires high performance signal detector since the channel impulse responses are varied rapidly in time. In order to select the optimal signal detector, we simulated the performances of three detection methods. One is using RSSI signal, the other is using RSSI signal and I/Q signal, and the third is using I/Q signal through the Monte Carlo simulation. We evaluated the performances of the algorithms using our own system based on MAX 2829 transceiver(MAXIM $Integrated^{TM}$) in a real vehicular environment. As a result, the experiment using Fully I/Q signal derives the most excellent performance with the lowest minimum receiver sensitivity, packet error rate (PER) and false alarm rate (FAR).

IoT 기기를 활용한 무게 감지 자동 주문 시스템에 관한 연구 (A Study on Weight-sensing automatic ordering system using IoT devices)

  • 한사발;고영준;김진형;안형준;조은상;김지영
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2017년도 추계학술발표대회
    • /
    • pp.1159-1161
    • /
    • 2017
  • 본 연구에서는 화장품, 세제, 쌀과 같은 생활용품들의 효율적인 관리를 위해 IoT 기기를 활용하여 무게를 감지하여 자동 주문을 하는 시스템을 제안한다. Hardware에서 생활용품의 무게를 지속적으로 sensing하고 BLE(Bluetooth Low Energy)를 통해 Android Application으로 데이터를 전송한다. Android Application에서 생활용품들의 상태를 저장하고 일정 무게 이하로 감소 시 Push Alarm으로 사용자에게 상품 재주문 제안 및 상품 추천을 한다. 이를 바탕으로 생활용품 관리의 번거로움을 줄이고 사용자의 생활물품의 소모 양상을 데이터화 할 수 있다.

열 감지기의 응답특성에 관한 시험연구 (Experiment study on the Responsiveness of Spot- Type Heat Detector)

  • 이복영
    • 방재기술
    • /
    • 통권19호
    • /
    • pp.9-16
    • /
    • 1995
  • The spot-type heat detector is a main component of the automatic fire alarm system intended to signal when heat energy is produced in protected area. The most of protected area in our country is installed spot-type heat detector. On this study, the responsiveness to the change of environmental temp. of spot-type heat detec-tor were obtained and analyzed under specified temp., velocity in accordance with the KOFEIS stan-dard. The experiment was carried under the condition with the change of environmental temp. Concluion of this study is as follows : 1. It was confirmed that the responsiveness of rate-of rise heat detector is sensitive to temp. below 10 degrees above zero. The malfunction appeared at 40 degrees above zero and intended performance is disqualified at 50 degrees above zero. 2. The intended performance of fixed-temp. detector which is maintained for the change of envi-ronmental temp. But the responsiveneness is confirmed instability for the change of environmental temp.

  • PDF

A Video Smoke Detection Algorithm Based on Cascade Classification and Deep Learning

  • Nguyen, Manh Dung;Kim, Dongkeun;Ro, Soonghwan
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제12권12호
    • /
    • pp.6018-6033
    • /
    • 2018
  • Fires are a common cause of catastrophic personal injuries and devastating property damage. Every year, many fires occur and threaten human lives and property around the world. Providing early important sign for early fire detection, and therefore the detection of smoke is always the first step in fire-alarm systems. In this paper we propose an automatic smoke detection system built on camera surveillance and image processing technologies. The key features used in our algorithm are to detect and track smoke as moving objects and distinguish smoke from non-smoke objects using a convolutional neural network (CNN) model for cascade classification. The results of our experiment, in comparison with those of some earlier studies, show that the proposed algorithm is very effective not only in detecting smoke, but also in reducing false positives.

베어링 내륜의 내면 연삭가공에서 진원도 개선 방안 (A scheme on roundness lmprovement in internal grinding of bearing inner race)

  • 김정석;강명창;배정철
    • 한국정밀공학회지
    • /
    • 제13권5호
    • /
    • pp.60-66
    • /
    • 1996
  • Precision of bearing race is very important to maintain the clearance between ball and inner race. In internal grinding of bearing race, its roundness is dependent on shoe wear, accuracy of jig, dressing method and grinding conditions. In this study, the characteristics of shoe wear and eccentricity of workpiece were investigated experimentally. When wear of fornt shoe wear reaches at 100.mu. m and that of rear shoe reaches at 114 .mu. m, eccentricity of inner race is increased to 1.4 .mu. m. Roundness of race is mainly related to wear of rear shoe and ring type shoe is recommended to improve roundness of race.

  • PDF

긴급 상황 인식 및 자동 알림 신고 앱 시스템 (The App System For Scream Awareness, Automatic Siren Alarm, etc)

  • 유희진;문지영;손효정;장세은;이경준
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2022년도 추계학술발표대회
    • /
    • pp.890-892
    • /
    • 2022
  • 스마트폰 모바일 앱을 이용한 범죄 예방 시스템은 다양하게 제안되고 개발되어 왔으나, 생활 안전의 유지를 위한 경찰 등 공공 서비스를 위한 인력은 매우 부족한 실정이다. 본 연구는 스마트폰 이용자가 "범죄예방 이론"에 따라 "범죄 취약환경에 및 감시 등 방어기제 부재" 상황에서 신속하게 벗어날 수 있도록 도움을 주는 앱 시스템 필요성 인식에 따라 "긴급 상황 인식 및 자동 알림 신고 앱 시스템"을 기획하여 개발한 결과를 기술하였다.

안전한 도시철도를 위한 통합 화재 경보 시스템 구축의 연구 (A Study on Integrated Fire Alarm System for Safe Urban Transit)

  • 장일식;안태기;전지혜;조병목;박구만
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
    • /
    • pp.768-773
    • /
    • 2011
  • Today's urban transit system is regarded as the important public transportation service which saves passengers' time and provides the safety. Many researches focus on the rapid and protective responses that minimize the losses when dangerous situation occurs. In this paper we proposed the early fire detection and corresponding rapid response method in urban transit system by combining automatic fire detection for video input and the sensor system. The fire detection method consists of two parts, spark detection and smoke detection. At the spark detection, the RGB color of input video is converted into HSV color and the frame difference is obtained in temporal direction. The region with high R values is considered as fire region candidate and stepwise fire detection rule is applied to calculate its size. At the smoke detection stage, we used the smoke sensor network to secure the credibility of spark detection. The proposed system can be implemented at low prices. In the future work, we would improve the detection algorithm and the accuracy of sensor location in the network.

  • PDF

Breakage Detection of Small-Diameter Tap Using Vision System in High-Speed Tapping Machine with Open Architecture Controller

  • Lee, Don-Jin;Kim, Sun-Ho;Ahn, Jung-Hwan
    • Journal of Mechanical Science and Technology
    • /
    • 제18권7호
    • /
    • pp.1055-1061
    • /
    • 2004
  • In this research, a vision system for detecting breakages of small-diameter taps, which are rarely detected by the indirect in-process monitoring methods such as acoustic emission, cutting torque and motor current, was developed. Two HMI (Human Machine Interface) programs to embed the developed vision system into a Siemens open architecture controller, 840D, were developed. They are placed in sub-windows of the main window of the 840D and can be activated or deactivated either by a softkey on the operating panel or the M code in the NC part program. In the event that any type of tool breakage is detected, the HMI program issues a command for an automatic tool change or sends an alarm signal to the NC kernel. An evaluation test in a high-speed tapping machine showed that the developed vision system was successful in detecting breakages of small-diameter taps up to M1.

기존아파트의 적용성을 고려한 주소형 자동화재탐지설비의 설계 및 검증 (Design and Verification of Addressable Automatic Fire Detection System for Existing Apartments)

  • 안현성
    • 토지주택연구
    • /
    • 제13권4호
    • /
    • pp.105-114
    • /
    • 2022
  • 화재감지기는 비화재보가 많이 발생함에 따라서 신속하게 감지기를 확인해야 하지만 일반감지기는 주소기능이 없어 신속한 대응에 한계가 있다. 주소 기능을 갖는 아날로그감지기 등을 적용하면 해결되지만 기존 공동주택의 경우 교체기간, 교체 비용, 선로의 사용 등의 문제로 인해 설비의 전면 교체에는 한계가 있다. 이에 별도로 기존아파트에 적용성을 고려한 맞춤형 설비가 필요하다. 본 연구에서는 기존아파트의 특성을 고려하여 주소형 감지기와 중계기를 설계하여 중계기에서 감지기 위치를 확인할 수 있는 시스템을 개발하였다. 주소형 감지기는 정온식과 광전식 감지기를 설계하였으며, 주소형 중계기는 FND를 추가하여 감지기 위치 확인이 가능하게 하였다. 선로의 종류, 길이를 고려하여 성능검증을 하였으며, 단선에러 동작과 일반감지기와의 호환성 등을 추가 검증하였다.

지반 분야에서의 시설물 안전위험 자동화 상황전파 시스템 개발 (Development of Infrastructure automatic alert populating system in Geotechincal Monitoring field)

  • 정재현;김용수;한상재
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2010년도 춘계 학술발표회
    • /
    • pp.933-939
    • /
    • 2010
  • 얼마전 판교 근교에 위치한 흙막이 가시설 공사에서 가시설 구조물이 붕괴하여 인적 물적 피해가 발생한 사례가 있다. 그러한 사례가 발생되었음에도 불구하고 현재 흙막이 가시설 구조물 붕괴를 미연에 감지하고 조기 대응하는 방식을 자동화 시스템으로 도입 할 것에 대하여 시공사에서 미온적인 태도를 보이고 있다. 이와 같은 대표적인 이유는 제한된 예산과 계측의 불신임이 가장 큰 이유로 알려져 있다. 비록 지반 시설물에 대하여 현재 센서기반 자동화 계측 시스템을 일부 도입하고 있으나, 현재 운영되고 있는 대부분의 시스템은 계측데이터를 분석하고 시설물 내부 위험을 평가하여 관리주체에 보고 하는데는 상당한 시간이 소요되고, 긴급하게 시설물 이상여부를 보고해야 하는 상황에 자동화 계측시스템이 경고 전파를 적절하게 발휘하지 못하는 경우가 비번하게 발생한다. 따라서, 본 논문에서는 기존 지반관련 자동화 계측의 경고전파체계에 관한 문제점을 살펴봄으로써, 보다 적절한 경고전파 시스템을 제안하며, 제한된 시스템은 국부 단일 계측 설비에 적용 가능할 뿐만 아니라, 지반구조물 안전관리에 활용 연계 될 수 있도록 표준 프로토콜 및 네트워크도 제안하고자 한다.

  • PDF