• Journal of the Korean Society of Costume
• /
• v.25
• /
• pp.133-144
• /
• 1995

The purpose of the study is to develop a computer program for making patterns for women's traditional Korean stockings, Beoson, Thus, the IBM 386 DX computer, the HP DROFT Pro Plotter, and Auto LISP language are used in this study. The procedures for the automated drafting can be summarized as follows : 1. A Beoson pattern was selected. 2. 39 co-ordinate points necessary for designing patterns of Beoson were established. 3. A program for drafting the pattern was developed ; refer to Table 1. 4. The Program was designed by inputting individual body measurements (foot length, foot circumferenceI, and foot circumfer-enceII) and angle(30 degrees). 5. Beoson patterns were made very correctly and quickly by using computers.

• Journal of Korean Home Economics Education Association
• /
• v.4 no.1
• /
• pp.1-15
• /
• 1992

The aim of the research is to develop a PC based courseware which is programed to drafts clothing patterns. The pattern making are numerically formulized. The of the program were as follows；1. Menu and instructions are displayed in Korean Language. 2. Easy step-by-step instructions explaining how to draw basic pattern and design pattern. 3. Low cost personal computer and general purpose printer are used. The source program was written in C-language and compiled using Turbop C. The Bezier spline is used to draw curves of pattern and to display Korean characters and pattern on same screen simultaneoulsy, Korean characters are drawn graphically. The low cost IBM Personal Computer or compatibles with Hercules Graphic Card is required to run this grogram.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.329-331
• /
• 2003

PROSET2000 that is integrated protective management system had developed and used in order to automate the setting process of protective relays in transmission system protection. PROSET2000 have database for relay setting and automated for relay setting program within. This paper proposed PCM current differential relay setting program point of Object Oriented Programming paradigm using Unified Modeling Language about additional relay in PROSET2000. Nevertheless each relay uses same current differential but setting method is different. This paper discribed different thing about setting method of each relay and evaluated more effective and corrective relay setting program using UML.

• Journal of The Korean Astronomical Society
• /
• v.33 no.2
• /
• pp.123-126
• /
• 2000

We have developed a near real-time flare alerting system which (1) downloads the latest GOES-l0 1-8 ${\AA}$ X-ray flux 1-min data by an automated ftp program and shell scripts, (2) produces a beep sound in a simple IDL widget program when the flux is larger than a critical value, and (3) makes it possible to do a wireless alerting by a set of portable transceivers. Thanks to the system, we have made successful Ha flare observations by the Solar Flare Telescope in Bohyunsan Optical Astronomy Observatory. This system is expected to be helpful for ground-based flare observers.

• Journal of KIBIM
• /
• v.10 no.4
• /
• pp.40-49
• /
• 2020

This report describes the development of a program that can be linked to an alignment and extracts related information using a prefab structured digital engineering model. The subject bridge was set as a straight alignment, the Superstructure type as Precast girder and the Substructure type as Precast pier and Cast-in-situ Abutment. We identified the variables required to create a digital engineering model and reviewed them to create the digital engineering model by entering them as numerical values in the program. In addition, it is configured so that the variables linked to the alignment can be entered numerically. The quantity takeoff can be calculated when the design is complete. The purpose of the program development presented in this report is to enable the designers to select the optimal alternative by designing a bridge that best fits their current situation, extracting the relevant information and then by providing it to the manufacturer and construction company.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.04a
• /
• pp.262-271
• /
• 1998

Recent, more and more steel deck bridges are adopted for the design of long span bridges and the upgrading of existing concrete deck bridges, mainly because of reduced self weight, higher stiffness and efficient erection compared to concrete decks. The main objective of this study is to propose on formulation of the design optimizations to develop an optimal desist program required for optimum desist for orthotropic steel-deck bridges. The objective function of the optimization is formulated as a minimum initial cost design problem. The behavior and design constraints are formulated based on the ASD and LRFD criteria of the Korean Bridge Design Code(1996). The optimum design program developed in this study consists of two steps. In the first step the system optimization of the steel box girder bridges is carried out. And in the second step the program provided the optimum design of the orthotropic steel-deck with close ribs. In the optimal design program the analysis module for the deck optimization is based on the Pelican Esslinger method. The optimizer module of the program utilizes the ADS(Automated Desist Synthesis) routines using the optimization techniques fuor constrained optimization. From the results of real application examples, The cost effectiveness of optimum orthotropic steel-deck bridges designs based on both ASD and LRFD methods is investigated by comparing the results with those of conventional designs, and it may be concluded that the design developed in this study seems efficient and robust for the optimization of orthotropic steel-deck bridges

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.825-826
• /
• 2006

In this paper, we propose an algorithm that applies Rolle's theorem to automatically detect and label peak III and V of the normal, suprathreshold auditory brainstem response (ABR). ABR waveform were recorded from 55 normal-hearing ears at screening levels varying from 30 to 60 dBnHL. For each ABR waveform, the peak-finding algorithm proceeded in fourth steps: (1) Select maximum and minimum values of the target ABR waveform, (2) divide this range into n equal parts, (3) effective candidate peaks in the ABR waveform are identified using Rolle's theorem (4) peak III and V are identified from these candidate peaks based on their latency and morphology. As a result, proposed auto dectection method showed high correlation and accuracy with manual detection method performed by clinician. By using proposed algorithm, clinician can detect and label peak III and V faster and more efficient than manual detection method.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.246-249
• /
• 2000

In this paper, we describe an automated extraction program that transforms a mask layout into an approximated equivalent circuit information suitable for circuit simulation, and that extract the geometric parameters of stacked MOSFETs and the distributed RCs of layout blocks. To extract equivalent circuit from mask layout, we propose new block disassembly technique capable of accurate computations of distributed RCs at branch point, using vectorized edges which represent the outline of an individual polygon.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.298-301
• /
• 1992

A digital image processing approach has been adopted to measure the flank wear area, which is very difficult to measure using conventional techniques. Automatic thresholding of the gray-level values of an image is very useful in automated analysis of image. 1-D entropy thresholding technique is used for image processing and analysis of the flank wear area. This strategy provides more information about drill wear conditions and should therefore have a higher reliability than previous methods. This study calulated quantitatively the flank were area of drill by computer program.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 1999.03a
• /
• pp.51-54
• /
• 1999

현재 국내에서 시공되고 있는 터널 발파 패턴의 경우 현장암반조건과 발파조건 등 발파에 영향을 미치는 제반 여건을 정량적으로 고려한 컴퓨터에 의한 자동설계가 이루어지지 않고 있다. 그러므로 경험적이고 정성적인 방법에 의하여 터널 발파 설계가 이루어짐으로써 발파설계와 시공이 불일치하고 여굴 및 주변 손상권의 확대로 인한 터널 보강에도 영향을 미치는 등 문제점이 있다. 또한 최근에 들어와서 터널 발파 공사가 인가 근처에서 이루어 질 경우 발파진동에 의한 민원을 야기하고 있어 이를 고려한 안전 발파 설계가 절실히 요구되고 있다. (중략)