• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.1
• /
• pp.85-92
• /
• 1998

In this paper, we design a sequential system controller, which is capable of processing parallel sequence, on the basis of analysis of control specification described by Petri Net with incidence matrix. The sequential system controller consists of input conditioning unit and petri net control unit which is composed of the token control unit and firing unit. The firing unit determines the firing condition of the transfer signal on the basis of the token status of token control unit. By the proposed scheme, we can easily develop and implement the sequential system controller of automated warehousing system, automated transportation system, elevator system, and so on, as it is possible to modify control specification by changing simply the content of incidence matrix ROM and to expand easily functional capacity as the result of modular design.design.

• The KIPS Transactions:PartD
• /
• v.11D no.5
• /
• pp.1087-1094
• /
• 2004

Normally, formalization and standardization are followed while doing any system analysis and design. But, in actual system development, products can't be written using the automated tool for all products due to their own characteristics. That results the inconsistency among development products and various kinds of problem can occur in the products. In this paper, we present a technique that supports consistency among products of analysis and design phase developed according to object oriented method. And, this paper also presents the implementation tool.

• Mass Spectrometry Letters
• /
• v.4 no.2
• /
• pp.25-29
• /
• 2013

Proteomics for biomarker validation needs high throughput instrumentation to analyze huge set of clinical samples for quantitative and reproducible analysis at a minimum time without manual experimental errors. Sample preparation, a vital step in proteomics plays a major role in identification and quantification of proteins from biological samples. Tryptic digestion a major check point in sample preparation for mass spectrometry based proteomics needs to be more accurate with rapid processing time. The present study focuses on establishing a high throughput automated online system for proteolytic digestion and desalting of proteins from biological samples quantitatively and qualitatively in a reproducible manner. The present study compares online protein digestion and desalting of BSA with conventional off-line (in-solution) method and validated for real time sample for reproducibility. Proteins were identified using SEQUEST data base search engine and the data were quantified using IDEALQ software. The present study shows that the online system capable of handling high throughput samples in 96 well formats carries out protein digestion and peptide desalting efficiently in a reproducible and quantitative manner. Label free quantification showed clear increase of peptide quantities with increase in concentration with much linearity compared to off line method. Hence we would like to suggest that inclusion of this online system in proteomic pipeline will be effective in quantification of proteins in comparative proteomics were the quantification is really very crucial.

• Journal of KSNVE
• /
• v.5 no.3
• /
• pp.361-371
• /
• 1995

The vibration of reactor internals should be monitored and diagnosed for the early detection of the failure of reactor pressure vessel. This can be performed by analyzing the time-history signals from the excore neutron flux detertors. The conventional method is an on-demand system which generates power spectra through Fast Fourier Transform(FFT) algorithm. The operator can make his own decision to detect abnormal vibration using these spectra. This post- processing method, however, requires special expertise in the reactor noise analysis and signal processing for random data. It may mislead the operator into erroneous decision-making, if he is a novice in reactor noise analysis. Hence this study is focused on the automated monitoring and diagnosis procedure for the reactor noise analysis, especially on the Fuzzy algorithm to recognize the pattern of the vibration of Core Suport Barrel. The excore neutron signals of Yonggwang Nuclear Power Plant unit 3 is acquired and analyzed using conventional FFT spectra and tested to adopt the Fuzzy method. An Automated Monitoring and Diagnosis System for CSB Vibration using this Fuzzy method is proposed. Furthermore, vibration data for CSB of Youggwang Nnclear Power Plant unit 3 is presented.

• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.9-15
• /
• 2023

The task of generating a reduced thermal model of a satellite must be performed at least once in a satellite project to shorten the time of orbital thermal analysis and perform thermal analysis coupled to a launch vehicle. Although there are various methods for generating a reduced thermal model, an intuitive and convenient iso-thermal mesh generation method is used the most widely in practice. However, there is still a lack of research on automation of the isothermal mesh generation method. In this paper, we proposed an automated generation method of satellite reduced thermo-mathematical model based on the isothermal mesh generation method considering temperature tolerance and fixed nodes. The proposed method was validated using three different temperature tolerance cases. The average temperature difference satisfied the guidelines of ECSS.

• Journal of the Korean Institute of Gas
• /
• v.1 no.1
• /
• pp.87-94
• /
• 1997

There are many kinds of complicated equipments in the chemical plants. So the chemical plants have high possibility of accidents. Hazard analysis is one of the basic tasks to ensure the safety of chemical plants. However, it has many shortcomings. To overcome the problems, there have been attempts to automate this work by utilizing computer technology, particularly knowledge-based technique. However, many of the past approaches are lacking in properties: safeguard consideration, accident diversity, cause and consequence diversity, pathway leading to accidents, and various hazard analysis reasoning. Therefore, in this study, three analysis algorithms were proposed using multimodel approach, and a hazard analysis system, AHA, was developed on G2. The case study was solved with AHA system successfully.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.6 no.2
• /
• pp.144-149
• /
• 2006

This paper describes a novel automated analysis system for bellows of piping system. An automatic finite element (FE) mesh generation technique, which is based on the fuzzy theory and computational geometry technique, is incorporated into the system, together with one of commercial FE analysis codes and one of commercial solid modelers. In this system, a geometric model, i.e. an analysis model, is first defined using a commercial solid modelers for 3-D shell structures. Node is generated if its distance from existing node points is similar to the node spacing function at the point. The node spacing function is well controlled by the fuzzy knowledge processing. The Delaunay triangulation technique is introduced as a basic tool for element generation. The triangular elements are converted to quadrilateral elements. Practical performances of the present system are demonstrated through several analysis for bellows of piping system.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.6 no.1
• /
• pp.58-63
• /
• 2006

This paper describes a novel automated analysis system for bellows of piping system. An automatic finite element (FE) mesh generation technique, which is based on the fuzzy theory and computational geometry technique, is incorporated into the system, together with one of commercial FE analysis codes and one of commercial solid modelers. In this system, a geometric model, i.e. an analysis model, is first defined using a commercial solid modelers for 3-D shell structures. Node is generated if its distance from existing node points is similar to the node spacing function at the point. The node spacing function is well controlled by the fuzzy knowledge processing. The Delaunay triangulation technique is introduced as a basic tool for element generation. The triangular elements are converted to quadrilateral elements. Practical performances of the present system are demonstrated through several analysis for bellows of piping system.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.2039-2044
• /
• 2011

A semi-continuous and automated method for quantifying atmospheric ammonia at the parts per billion level has been developed. The instrument consists of a high efficiency diffusion scrubber, an electrolytic on-line anion exchange device, and a conductivity detector. Water soluble gases in sampled air diffuse through the porous membrane and are absorbed in an absorbing solution. Interferences are eliminated by using an anion exchange devises. The electrical conductivity of the solution is measured without chromatographic separation. The collection efficiency was over 99%. Over the 0-200 ppbv concentration range, the calibration was linear with $r^2$ = 0.99. The lower limit of detection was 0.09 ppbv. A parallel analysis of Seoul air over several days using this method and a diffusion scrubber coupled to an ion chromatography system showed acceptable agreement, $r^2$ = 0.940 (n = 686). This method can be applied for ambient air monitoring of ammonia.

• Journal of Digital Convergence
• /
• v.3 no.2
• /
• pp.9-22
• /
• 2005

A large scale automated material handling system (AMHS) is simulated using real industrial input data to analyze its performance so that one can scrutinize the critical factors that affect the AS /RS performance. The factors included in this study are line balancing efficiency, the distance between machines, and cycle time of the machines. The performance of AS /RS is measured in terms of R/M utilities that are latter used to classify the AS/RS structure into three types such as Good, Normal, and Poor. Among the three factors considered in this study, the line balance efficiency within each AS/RS is found as the most critical factor which statistically affect the AS/RS performance.