• International Journal of Automotive Technology
• /
• 제7권2호
• /
• pp.129-137
• /
• 2006

The representative interactive flamelet(RIF) concept has been applied to numerically simulate the combustion processes and pollutant formation in the HSDI diesel engine. In order to account for the spatial inhomogeneity of the scalar dissipation rate, the eulerian particle flamelet model using the multiple flamelets has been employed. The vaporization effects on turbulence-chemistry interaction are included in the present RIF procedure. the results of numerical modeling using the rif concept are compared with experimental data and with numerical results of the widely-used ad-hoc combustion model. Numerical results indicate that the rif approach including the vaporization effect on turbulent spray combustion process successfully predicts the ignition delay characteristics as well as the pollutant formation in the HSDI diesel engines.

• 한국안전학회지
• /
• 제27권5호
• /
• pp.70-76
• /
• 2012

For the safe handling of n-tetradecane, the lower flash points and the upper flash point, fire point, AITs (auto-ignition temperatures) by ignition delay time were experimented. Also lower and upper explosion limits by using measured the lower and upper flash points for n-tetradecane were calculated. The lower flash points of n-tetradecane by using closed-cup tester were measured $104^{\circ}C$ and $112^{\circ}C$. The lower flash points and fire point of n-tetradecane by using open cup tester were measured $113^{\circ}C$ and $115^{\circ}C$, respectively. This study measured relationship between the AITs and the ignition delay times by using ASTM E659 apparatus for n-tetradecane. The experimental AIT of n-tridecane was $207^{\circ}C$. The calculated lower and upper explosion limit by using measured lower $104^{\circ}C$ and upper flash point $140^{\circ}C$ for n-tetradecane were 0.63 Vol.% and 3.18 Vol%.

• 한국자동차공학회논문집
• /
• 제16권4호
• /
• pp.151-158
• /
• 2008

Gasoline Homogeneous Charge Compression Ignition (HCCI) combustion is a new combustion concept. Unlike the conventional internal combustion engine, the premixed fuel mixture with high residual gas rate is auto-ignited and burned without flame propagation. There are several operating factors which affect HCCI combustion such as start of combustion (SOC), residual gas fraction, engine rpm, etc. Among these factors SOC is a critical factor in the combustion because it affects exhaust gas emissions, engine power, fuel economy and combustion characteristics. Therefore SOC of gasoline HCCI should be controlled precisely, and SOC detection should be preceded SOC control. This paper presents a control oriented SOC detection method using 50 percent normalized difference pressure. Normalized difference pressure is defined as the normalized value of difference pressure and difference pressure is difference between the in-cylinder firing pressure and the motoring pressure. These methods were verified through the HCCI combustion experiments. The SOC detection method using difference pressure provides a fast and precise SOC detection.

• 한국연소학회:학술대회논문집
• /
• 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
• /
• pp.231-236
• /
• 2003

HCCI(Homogeneous Charge Compression Ignition) combustion is an advanced combustion process explained as a homogeneously premixed charge of a fuel where air is admitted into the cylinder and compression ignited. It has possibility to reduce NOx by spontaneous auto-ignition at multiple points that allows very lean combustion resulting in low combustion temperatures. Particulate matters (PM) could be also reduced by the homogeneous combustion and no fuel-rich zones. Injection timing is extremely advanced to achieve homogeneous charge where a diesel fuel could not be vaporized sufficiently due to low pressure and low temperature condition. Also the over-penetration could be a severe problem. The small injection angle and multi-hole injectors were applied to solve these problems. Dimethyl ether (DME) as an altenative fuel was also applied to relive the bad vaporization problem associated with early injection of diesel fuel. Neat DME has a very high cetane rating and high vapor pressure. Contained oxygen reduces soot during the combustion. Experimental result shows DME can be easily operated in an HCCI engine. PM shows almost zero value and NOx is reduced more than 90% compared to direct-injection diesel engine operating mode but problem of early ignition needs more investigation.

• 한국화재소방학회논문지
• /
• 제25권4호
• /
• pp.28-34
• /
• 2011

사이클로헥사논의 안전한 취급을 위해서 $25^{\circ}C$에서 폭발한계를 고찰하였고, 실험장치를 이용하여 하부 인화점과 발화지연시간에 의한 발화온도를 측정하였다. 공정의 안전을 위해서 사이클로헥사논의 폭발하한계는 1.1 Vol.%($100^{\circ}C$), 상한계는 9.4 Vol.%를 추천하였고, 하부인화점은 밀폐계에서 $42{\sim}43^{\circ}C$와 개방식에서 $49{\sim}51^{\circ}C$로 측정되었다. ASTM E659-78 장치를 사용하여 자연발화온도와 발화지연시간을 측정하였고, 여기서 측정된 최소자연발화온도는 $415^{\circ}C$였다.

• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.171-178
• /
• 2008

The combustion and exhaust emission characteristics were investigated in an DME fueled HCCI engine. Carbon dioxide, nitrogen and mixed gas, which was composed of carbon dioxide and nitrogen, were used as control parameters of combustion and exhaust emission. As the oxygen concentration in induction air, which was occurred by carbon dioxide, nitrogen and mixed gas, was reduced, the start of auto-ignition was retarded and the burn duration was extended due to obstruction of combustion and reduction of combustion temperature. Due to these fact, indicated mean effective pressure was increased and indicated combustion efficiency was decreased by carbon dioxide, nitrogen and mixed gas. In case of exhaust emission, hydrocarbon and carbon monoxide was increased by reduction of oxygen concentration in induction air. Especially, partial burning was appeared at lower than about 18% of oxygen concentration by supplying carbon dioxide. However it was overcome by intake air heating.

• 한국화재소방학회논문지
• /
• 제19권4호
• /
• pp.37-41
• /
• 2005

본 연구에서는 미분무수 소화시스템의 변압기에 대한 냉각성능을 기술한다. 재발화를 방지하기 위한 냉각성능은 변압기의 철심으로부터 절연유에 전달되어 축적된 열에너지를 효과적으로 소산시키는 것을 의미한다. 철심이 매우 무겁기 때문에 축소 규모의 변압기를 이용하여 실험을 수행하였고, 이 결과로부터 냉각시간을 결정하기 위하여 상사해석을 수행하였다. 해석 및 실험을 통한 상사법칙으로부터 재발화 방지를 위한 미분무수 소화시스템의 소화시간은 약 12시간으로 나타났다.

• 한국가스학회지
• /
• 제27권4호
• /
• pp.50-55
• /
• 2023

리튬이온 2차전지는 현재 많은 수요와 공급이 이루어지고 있다. 본 연구에서는 리튬이온전지의 전해질 유기용매로 사용되는 EC(Ethylene Carbonate)의 연소특성치 연구를 통해 이를 취급하는 공정의 안전성 확보를 목적으로 한다. 밀폐식 장치인 Setaflash와 Pensky-Martens에 의한 EC의 인화점은 141 ℃와 143 ℃, 개방식 장치인 Tag와 Cleveland는 각각 152 ℃와 156 ℃로 측정되었으며 AIT(Auto Ignition Temperature)는 420 ℃로 측정되었다. Setaflash에서 측정된 인화점에 의한 LEL(Lower Explosive Limit) 은 3.6 Vol.%로 계산되었다.

• 한국산학기술학회논문지
• /
• 제20권4호
• /
• pp.590-596
• /
• 2019

산업이 발달함에 따라 석탄, 석유등 화석연료의 사용이 증대되고 있다. 그 결과 온실가스의 증가와 더불어 이상기후 등의 문제가 발생하게 되었다. 이로 인해 주 자원을 대체 할 수 있는 친환경적인 신재생에너지에 관한 연구가 활발히 진행 중이며, 그 중 열효율이 높은 우드펠릿이 화력발전소, 가스보일러 등에서 대체연료로서 각광받고 있다. 그러나, 우드펠릿의 사용량은 꾸준히 증대 되고 있는 반면 우드펠릿의 사용 시 발생할 수 있는 화재 및 자연발화 등의 위험성에 대한 선행연구가 부족한 실정이다. 이에 본 연구에서는 길이 20 cm, 높이 20 cm, 두께 14 cm의 시료용기를 사용하여 항온조 내부 유량변화에 따른 우드펠릿 최소자연발화온도와 발화한계온도를 구하여 발화특성을 예측하였다. 그 결과 유량이 0 NL/min일 때 $153^{\circ}C$에서 주위온도보다 시료의 중심온도가 상승하여 발화하였고 이때의 발화한계온도는 $152.5^{\circ}C$를 구하였으며, 유량이 0.5 NL/min, 1.0 NL/min에서 발화한계온도인 $149.5^{\circ}C$를 구하였다. 또한 유량이 1.5 NL/min일 때 발화한계온도인 $147.5^{\circ}C$를 구하였으며, 동일한 저장량에서 유량이 증가할수록 발화한계온도가 낮아지는 결과를 도출하였다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.13-14
• /
• 2005

Multi-dimensional combustion analysis and experiment has been carried out to investigate the effects of the injector nozzle hole diameter and number on the NOx formation and fuel consumption in HYUNDAI HiMSEN engine. The behavior of spray and combustion phenomena in diesel engine was examined by FIRE code. Wave breakup and Zeldovich models were adopted to describe the atomization characteristics and NOx formation. Wallfilm model suggested by Mundo, et al. and auto-ignition model suggested by Theobald and Cheng were adopted to investigate the spray-wall interaction characteristics and ignition delay. The information of spray angle and spray tip penetration length was extracted from fuel spray visualization experiment and the fuel injection rate profile was extracted from fuel injection system experiment as an input and verification data for the combustion analysis. Next, the nine different nozzle configurations were simulated to evaluate the effect of injector hole diameter and number on the NOx formation and fuel consumption.