• 한국ITS학회 논문지
• /
• 제5권1호
• /
• pp.45-54
• /
• 2006

주파수 선택적 채널에서의 신호왜곡은 수신기에서의 채널추정을 어렵게 하여 펄스 타입의 UWB 시스템의 경우 동기 회로의 구현이 어렵다는 단점이 있다. 본 논문에서는 구현상 난점인 채널추정과 동기회로 설계를 간단히 기준 펄스를 함께 전송함으로써 해결하는 TR(Transmitted Reference), DTR(Differential TR) UWB을 분석하고 FSK 변조방법을 이용한 새로운 형태의 PRM(Pulse Repetition Modulation) UWB 방식을 제안한다. 기준 펄스를 이용한 통신의 수신기 구조인 Auto-correlation(AcR) 수신기가 잡음이 섞인 기준펄스를 이용하는 경우 성능저하 정도를 확률적으로 분석한다. 또한 SNR에 영향을 미치는 AcR 적분기의 적분구간에 대한 분석을 시뮬레이션을 통하여 분석한다.

• 한국통신학회논문지
• /
• 제38A권4호
• /
• pp.325-336
• /
• 2013

대표적인 D2D (Device-to-Device) 통신 시스템 중 하나인 Qualcomm사의 FlashLinQ 시스템에서는 링크 스케줄링 과정을 낮은 복잡도로 실현할 수 있도록 하기 위해 단일-톤 (single-tone) 신호를 이용한 우선순위 및 SIR (Signal-to-Interference power Ratio) 기반의 링크 스케줄링 기법을 수행한다. 하지만 다중 경로 채널 환경에서는 주파수 선택적 페이딩의 영향으로 단일-톤 위치에서와 실제 데이터가 전송되는 전체 대역에서의 수신 전력 간 오차가 발생할 수 있으며, 이는 공평성 측면에서 문제가 될 뿐만 아니라 셀 전체 전송률 상의 손실을 일으킬 수 있다. 따라서, 본 논문에서는 이러한 문제를 해결하기 위해 CAZAC (Constant Amplitude Zero Auto-Correlation) 시퀀스의 상관 특성을 이용해 전체 대역에 대한 SIR 에 가까운 값을 획득할 수 있는 링크 스케줄링 기법을 제안한다. 제안 기법은 전체 대역을 다수의 sub-block 으로 구분하고 각 sub-block 마다 링크의 우선순위에 해당하는 순환 오프셋 (cyclic offset) 을 적용한 CAZAC 시퀀스를 전 대역에 걸쳐 전송하여, 수신 신호와 참조 신호간의 순환 상호 상관 연산 (cyclic cross-correlation)을 통해 전체 대역에 대한 SIR 에 근접한 값을 획득할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.588-590
• /
• 2006

Recently, many on-line approaches to instrument channel surveillance (drift monitoring and fault detection) have been reported worldwide. On-line monitoring (OLM) method evaluates instrument channel performance by assessing its consistency with other plant indications through parametric or non-parametric models. The heart of an OLM system is the model giving an estimate of the true process parameter value against individual measurements. This model gives process parameter estimate calculated as a function of other plant measurements which can be used to identify small sensor drifts that would require the sensor to be manually calibrated or replaced. This paper describes an improvement of auto-associative kernel regression by introducing a correlation coefficient weighting on kernel distances. The prediction performance of the developed method is compared with conventional auto-associative kernel regression.

• 자동차안전학회지
• /
• 제5권1호
• /
• pp.11-15
• /
• 2013

Small overlap crash caused fatal injury in real-world crash. IIHS(Insurance Institute for Highway Safety) proposed the small overlap test. The objective of this study is to analyze dummy injury criteria and dummy excursion on the sled reinforced body angle. Result of the comparisons of dummy injury criteria of a head, neck, and chest was best correlation between sled and vehicle test on base $angle+3^{\circ}$. However, lower extremity was not correlation because sled test could not copy of intrusion. There were a correlation between dummy movement and sled reinforced body angle. Sled reinforced body angle affects the lateral direction of excursion more than longitudinal excursion.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권1호
• /
• pp.335-339
• /
• 2016

Background: The aim of this work was to investigate if serum and salivary auto-antibodies, isotypes IgG and IgM, against HER2 and MUC1 tandem repeat fragments could play a role in breast cancer screening. Materials and Methods: Our case-control study was conducted in breast cancer patients, in early stages (n=29), at the gynecology service, Maternity Souissi Hospital, Rabat, Morocco and healthy woman (n=31). Salivary and serum auto-antibodies against HER2 and MUC1 (tandem repeat) were assessed by enzyme-linked immunosorbent assay (ELISA) and compared between patients and healthy women using the Mann-Whitney U test. A P-value <0.05 was considered to be statistically significant. Results: Our data showed higher expression of all serum and salivary autoantibodies in patients as compared to healthy women p<0.05. However, serum IgM anti-MUC1 expression did not show a significant difference between cases and controls (p=0.79). Similarly, salivary IgG anti-HER2 expression did not differ (p=0.15). The correlation between the different isotypes of antibodies revealed that the highest correlation was between salivary IgG anti-HER2 and salivary IgG anti-MUC1(r=0.65). In fact, we have found in saliva the correlation between autoantibodies anti-MUC1 and anti-HER2 more important than in serum (r=0.59 and r=0. 55). However, the correlation between serum and saliva values for all antibodies was weak. Conclusions: Autoantibodies against HER2 and MUC1 may provide a useful approach in breast cancer screening when using both serum and saliva values.

• 대한의용생체공학회:의공학회지
• /
• 제12권3호
• /
• pp.185-190
• /
• 1991

An automatized latency calculation method of an e-OAE(evoked otacoustic emission) is proposed. The e-OAE signal measured from a normal adult is averaged 1000 times to remove noises. This averaged signal is converted to digital signal and that is processed by IBM-AT computer for latency calculation. we separate the stimulated and the emitted signal on the time domain by a modified LPC (linear prediction coding) spectrum, and the latency is calculated by cross-correlation method. By proposed latency calculation method the latency is 7.9[ms] for normal adult. The performance of the proposed method is also compared with that of the auto-correlation and cross performance of the proposed method is also compared with that of the auto-correlation and cross-correlation method. The result show that the proposed method has same precision with the conventional methods and can automatically calculate latency without subjective observation.

• Bulletin of the Korean Chemical Society
• /
• 제15권7호
• /
• pp.553-559
• /
• 1994

Dynamics of $CH_2CI$ group in ${\alpha},2,6$-trichlorotoluene dissolved in $CDCl_3$ was studied by observing various relaxation modes for $^{13}C$ under proton undecoupled condition. Partially relaxed $^{13}C$ spectra were obtained at $34^{\circ}C$ as a function of evolution time after applying various designed pulse sequences to this $AX_2$ spin system. It was found that nonlinear regression analysis of the relaxation data for these magnetization modes could provide the information about dipolar and spin-rotational auto-correlation and cross-correlation spectral densities for fluctuation of the $^{13}C-^1H$ internuclear vector in $CH_2Cl$ group. The results show that the effect of cross-correlation is comparable in magnitude to that of auto-correlation and the relaxation in this spin system is dominated by dipolar mechanism rather than spin-rotational one. From the resulting spectral density data we could calculate the bond angle ${\angle}HCH\;(105.1$^{\circ}$) and elements of the rotational diffusion tensor for $CH_2Cl$ group.

• Structural Engineering and Mechanics
• /
• 제20권4호
• /
• pp.477-493
• /
• 2005

In case of Mindlin plate, not only the bending deformation but also the shear behavior is allowed. While the bending and shear stiffness are given in the same order in terms of elastic modulus, they are in different order in case of plate thickness. Accordingly, bending and shear contributions have to be dealt with independently if the stochastic finite element analysis is performed on the Mindlin plate taking into account of the uncertain plate thickness. In this study, a formulation is suggested to give the response variability of Mindlin plate taking into account of the uncertainties in elastic modulus as well as in the thickness of plate, a geometrical parameter, and their correlation. The cubic function of thickness and the correlation between elastic modulus and thickness are incorporated into the formulation by means of the modified auto- and cross-correlation functions, which are constructed based on the general formula for n-th joint moment of random variables. To demonstrate the adequacy of the proposed formulation, a plate with various boundary conditions is taken as an example and the results are compared with those obtained by means of classical Monte Carlo simulation.

• Geomechanics and Engineering
• /
• 제17권6호
• /
• pp.565-572
• /
• 2019

Spatial variability is an inherent characteristic of soil, and auto-correlation length (ACL) is a very important parameter in the reliability or probabilistic analyses of geotechnical engineering that consider the spatial variability of soils. Current methods for estimating the ACL need a large amount of laboratory or in-situ experiments, which is a great obstacle to the application of random field theory to geotechnical reliability analysis and design. To estimate the ACL reasonably and efficiently, we propose a micro-structure based numerical simulation method. The quartet structure generation set algorithm is used to generate stochastic numerical micro-structure of soils, and scanning electron microscope test of soil samples combined with digital image processing technique is adopted to obtain parameters needed in the QSGS algorithm. Then, 2-point correlation function is adopted to calculate the ACL based on the generated numerical micro-structure of soils. Results of a case study shows that the ACL can be estimated efficiently using the proposed method. Sensitivity analysis demonstrates that the ACL will become stable with the increase of mesh density and model size. A model size of $300{\times}300$ with a grid size of $1{\times}1$ is suitable for the calculation of the ACL of clayey soils.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.259-260
• /
• 2002

In this paper, electrical discharge machined (EDM) surfaces machined with various machining parameters are characterized and simulated. Three-dimensional surface topography of EDM surfaces are measured by a stylus instrument. Surface topography is characterized with auto-correlation coefficient and height probability density functions. Then, EDM surfaces are modeled and computer-simulated by using the non-causal 2-D auto-regressive model. Simulation results show that EDM surfaces are characterized well by a few parameters.