• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.7
• /
• pp.1017-1021
• /
• 2005

Myostatin is a negative regulator of skeletal muscle growth and a loss of functional myostatin protein increases muscle hypertrophy and hyperplasia in cattle. The present study was conducted to investigate whether maternal passive immunization against myostatin would improve growth performance in chickens. A complete broiler myostatin cDNA was cloned and it was expressed into two transcripts as 1,128 bp and 985 bp by alternative splicing. A conjugated mature myostatin (350 bp) was used to induce autoimmunization and maternal passively immunized chickens was used for the experiment. It was confirmed that there was a maternal passive immunization against myostatin at zero weeks of age, but its effect was reduced by 6 weeks of age. The auto-immunized groups showed smaller body weights than those of control group during the growing period and the difference was getting bigger with time until 6 weeks of age. These results suggest that passive autoimmunization against myostatin used in this study is not potent enough to stimulate growth performance in chickens.

• The Plant Pathology Journal
• /
• v.19 no.1
• /
• pp.24-29
• /
• 2003

SS2-2, a hypernodulating soybean mutant was isolated by EMS mutagenesis from Sinpaldalkong 2. This auto-regulation mutant showed greater number of nodules and smaller plant size than its wild type Sinpaldalkong 2. SSR markers were used to identify DNA variation at SSR loci from different soybean LG. The only SSR marker that detected a length polymorphism between SS2-2 and its wild type ancestor was Satt294 on LG C1 instead of LG H, locating a hypernodulating gene. Sequencing data of flanking Satt294 indicated that the size variation was due to extra stretch of TTA repeats of the SSR motif in SS2-2, along with $A\longrightarrow$G transversion. In spite of phenotypic differences between the wild type and its hypernodulating mutants, genomic DNA poly-morphisms at microsatellite loci could not control regulation of nodule formation. The cDNA-AFLP method was applied to compare differential display of cDNA between Sinpaldalkong 2 and SS2-2. After isolation and sequence comparison with many AELP fragments, several interesting genes were identified. Northern blot analysis, immunolocalization and/or the yeast two-hybrid system with these genes might provide information on regulation of nodule development in SS2-2.

• Journal of Biosystems Engineering
• /
• v.42 no.4
• /
• pp.330-338
• /
• 2017

Purpose: The smartphone is actively being used in many research fields, primarily in medical and diagnostic applications. However, there are cases in which smartphone-based systems have been developed for agriculture, environment, and food applications. The purpose of this review is to summarize the research cases using smartphone cameras in agriculture, environment, and food. Methods: This review introduces seventeen research cases which used smartphone cameras in agriculture, food, water, and soil applications. These were classified as systems involving "smartphone-camera-alone" and "smartphone camera with optical accessories". Results: Detecting food-borne pathogens, analyzing the quality of foods, monitoring water quality and safety, gathering information regarding plant growth or damage, identifying weeds, and measuring soil loss after rain were presented for the smartphone-camera-alone system. Measuring food and water quality and safety, phenotyping seeds, and soil classifications were presented for the smartphone camera with optical accessories. Conclusions: Smartphone cameras were applied in various areas for several purposes. The use of smartphone cameras has advantages regarding high-resolution imaging, manual or auto exposure and focus control, ease of use, portability, image storage, and most importantly, programmability. The studies discussed were achieved by sensitivity improvements of CCDs (charge-coupled devices) and CMOS (complementary metal-oxide-semiconductor) on smartphone cameras and improved computing power of the smartphone, respectively. A smartphone camera-based system can be used with ease, low cost, in near-real-time, and on-site. This review article presents the applications and potential of the smartphone and the smartphone camera used for various purposes in agriculture, environment, and food.

• Journal of Pharmacopuncture
• /
• v.20 no.3
• /
• pp.179-193
• /
• 2017

Objectives: Nigella sativa (black seed or black cumin), which belongs to the Ranunculacea family, is an annual herb with many pharmacological properties. Among its many active constituents, thymoquinone (TQ) is the most abundant constituent of the volatile oil of Nigella sativa (N. sativa) seeds, and it is the constituent to which most properties of this herb are attributed. Methods: PubMed-Medline, Scopus, and Web of Science databases were searched to identify randomized control trials (RCTs) investigating the therapeutic effects of N. sativa and/or TQ. In this review, we investigated the clinical uses of N. sativa and TQ in the prevention and the treatment of different diseases and morbidity conditions in humans. Results: Black seed and TQ are shown to possess multiple useful effects for the treatment of patients with several diseases, such as inflammatory and auto-immune disorders, as well as metabolic syndrome. Also, other advantages, including antimicrobial, anti-nociceptive and anti-epileptic properties, have been documented. The side effects of this herbal medicine appear not to be serious, so it can be applied in clinical trials because of its many advantages. Conclusion: Some effects of N. sativa, such as its hypoglycemic, hypolipidemic and bronchodilatory effects, have been sufficiently studied and are sufficiently understood to allow for the next phase of clinical trials or drug developments. However, most of its other effects and applications require further clinical and animal studies.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.9
• /
• pp.1115-1124
• /
• 1988

A two-dimensional systolic array for fast Fourier transform, which has a regular and recursive VLSI architecture is presented. The array is constructed with identical processing elements (PE) in mesh type, and due to its modularity, it can be expanded to an arbitrary size. A processing element consists of two data routing units, a butterfly arithmetic unit and a simple control unit. The array computes FFT through three procedures` I/O pipelining, data shuffling and butterfly arithmetic. By utilizing parallelism, pipelining and local communication geometry during data movement, the two-dimensional systolic array eliminates global and irregular commutation problems, which have been a limiting factor in VLSI implementation of FFT processor. The systolic array executes a half butterfly arithmetic based on a distributed arithmetic that can carry out multiplication with only adders. Also, the systolic array provides 100% PE activity, i.e., none of the PEs are idle at any time. A chip for half butterfly arithmetic, which consists of two BLC adders and registers, has been fabricated using a 3-um single metal P-well CMOS technology. With the half butterfly arithmetic execution time of about 500 ns which has been obtained b critical path delay simulation, totla FFT execution time for 1024 points is estimated about 16.6 us at clock frequency of 20MHz. A one-PE chip expnsible to anly size of array is being fabricated using a 2-um, double metal, P-well CMOS process. The chip was layouted using standard cell library and macrocell of BLC adder with the aid of auto-routing software. It consists of around 6000 transistors and 68 I/O pads on 3.4x2.8mm\ulcornerarea. A built-i self-testing circuit, BILBO (Built-In Logic Block Observation), was employed at the expense of 3% hardware overhead.

• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.1-9
• /
• 2008

Proposed in the paper is an automated procedure to construct a plant model for PLC simulation. Since PLC programs only contain the control logic without the information on the plant model, it is necessary to build the corresponding plant model to perform simulation. Conventionally, a plant model for PLC simulation has been constructed manually, and it requires much efforts as well as the in-depth knowledge of simulation. As a remedy for the problem, we propose an automated procedure to generate a plant model from the symbol table of a PLC program. To do so, we propose a naming rule for PLC symbols so that the symbol names include enough information on the plant model. By analyzing such symbol names, we extract a plant model automatically. The proposed methodology has been implemented, and test runs were made.

• Journal of the Korean Magnetics Society
• /
• v.25 no.3
• /
• pp.87-91
• /
• 2015

This paper reports the design of solenoid in a coilgun for high velocity of projectile in a coilgun system, according to diameter of coil. Coilgun using a magnetic force means a mechanism that can control the magnetic material. When momentarily supply a large current to the solenoid instantaneous magnetic field is created around the coil, the projectile is fired by receiving a magnetic force towards the center of the coil, based on the right-hand rule of Fleming. The velocity of projectile is proportional to the magnetic force generated by the electromagnetic coil. The current affects the life of the coil and the current limit exists. Therefore, the coilgun design, which does not exceed the current limit and the magnetic forces are at the maximum, is required. In this paper, whether it is possible fire looking for the optimal number of turns according to the diameter of the coil from AWG #6 to AWG #18 for the design of the solenoid coil, and comparative analysis firing rate associated with it.

• Industry Promotion Research
• /
• v.3 no.1
• /
• pp.33-42
• /
• 2018

This study examined the effect of behavior on leader' s impersonal behavior and organizational members 'semi - productive task and the moderating effect of organizational support perception. As a result of conducting a questionnaire survey on SMEs of auto parts industry in Chungnam, Sejong, and Daejeon, the non-personality behaviors of the top leaders had a significant effect on the non-personality behaviors of the middle leaders (p <.001, ${\beta}=.910$). The results of this study are as follows. First, the relationship between the leader and the supervisor was significantly influenced by the non-personality behaviors. In addition, higher leaders have a moderating effect on negative behaviors and semi-productive task behaviors toward the organization of members. The control effect of semi - productive task behavior was confirmed. The results of this study provide suggestions for reducing economic loss and social loss due to semi-productive task behavior of organizational members by revealing the phenomenon of non-personality behavior of middle leader to non-personality behavior of upper leader.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.9
• /
• pp.1933-1940
• /
• 1997

The development of CMOS IC chip and external system with optical transmission sytem is proposed in this paper, which deal with 4 subject 4 channel biological signals, receive and transmit biological signals to the external system using LED and infrared light of photodiode. This system decreases the dependency of power supply voltage to the COMS IC chip. A newenforce synchronization technique using infrared bi-directional communication has ben proposed. The telemetner IC with the size of $5.1{\times}5.1mm^2$ has the followingfunctions:receiving of command signal, initialization of internal state of all functional blocks, decoding of subject selection signal, time division multiplexing of 4-channel modulated biological signals, transmission of modulated signals to external system, and auto power down control. To confirm the total telemetry system, electrocardogram is transmitted and received to the external system using optical link.

• Journal of Ginseng Research
• /
• v.39 no.4
• /
• pp.406-413
• /
• 2015

Background: Pathogenesis-related 10 (PR-10) proteins are small, cytosolic proteins with a similar three-dimensional structure. Crystal structures for several PR-10 homologs have similar overall folding patterns, with an unusually large internal cavity that is a binding site for biologically important molecules. Although structural information on PR-10 proteins is substantial, understanding of their biological function remains limited. Here, we showed that one of the PgPR-10 homologs, PgPR-10.3, shares binding properties with flavonoids, kinetin, emodin, deoxycholic acid, and ginsenoside Re (1 of the steroid glycosides). Methods: Gene expression patterns of PgPR-10.3 were analyzed by quantitative real-time PCR. The three-dimensional structure of PgPR-10 proteins was visualized by homology modeling, and docking to retrieve biologically active molecules was performed using AutoDock4 program. Results: Transcript levels of PgPR-10.3 expressed in leaves, stems, and roots of 3-wk-old ginseng plantlets were on average 86-fold lower than those of PgPR-10.2. In mature 2-yr-old ginseng plants, the mRNA of PgPR-10.3 is restricted to leaves. Ginsenoside Re production is especially prominent in leaves of Panax ginseng Meyer, and the binding property of PgPR-10.3 with ginsenoside Re suggests that this protein has an important role in the control of secondary metabolism. Conclusion: Although ginseng PR-10.3 gene is expressed in all organs of 3-wk-old plantlets, its expression is restricted to leaves in mature 2-yr-old ginseng plants. The putative binding property of PgPR-10.3 with Re is intriguing. Further verification of binding affinity with other biologically important molecules in the large hydrophobic cavity of PgPR-10.3 may provide an insight into the biological features of PR-10 proteins.