• 제목/요약/키워드: Auto Calibration Program

검색결과 19건 처리시간 0.023초

정밀 계측기기 자동 교정을 위한 Excel VBA 프로그램 개발 (Development of auto calibration program for instruments by Excel VBA)

  • 조현섭;유인호;장성환;유기수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
    • /
    • pp.1947-1948
    • /
    • 2006
  • 본 논문에서는 컴퓨터로 정밀 계측기기들을 자동 제어하고 데이터를 측정하기 위하여 기존의 상용 프로그램을 사용하지 않고 Excel VBA(Visual Basic for Applications)를 이용하는 방법에 대하여 연구하였다. 이는 반복측정 및 통계적 수치계산 등에서 많은 장점을 지니고 있어 수많은 국가교정기관 및 일반 산업체에서 유용하게 사용될 수 있으리라 사료된다.

  • PDF

주파수 의존형 전자근관장측정기 개발 및 임피던스차를 이용한 자동보정에 의한 성능향상 (Development of Frequency Dependent Type Apex-Locator Improvementation by Auto-calibration Using Impedance Difference)

  • 남기창;김수찬;김덕원;이승종
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1997년도 추계학술대회
    • /
    • pp.399-402
    • /
    • 1997
  • It is important to find a accurate root canal length or successful endodontic therapy. By X-ray method takes a long time and difficult in a curved canal. After developed electronic apex locator has allowed to measure the root canal length with easy, in a short time also in a curved canal. But most electronic apex locators have the disadvantage which is too short reading or sometimes the measurement itself becomes impossible if there are electrolytes in the canal. To overcome this drawback, impedance ratio method has been developed. In this study, we have developed frequency dependent electronic apex locator to minimize the interference of electrolytes. And based on that also some error in clinic use, we added the other method. Difference of two signals which are used in calculation of impedance ratio was can be represent the status of root canal fluid. As a result, using impedance ratio method and auto-calibration by voltage difference method can reduce the measurement error.

  • PDF

사진측량 기법을 사용한 어안렌즈 왜곡보정에 관한 연구 (A Distortion Correction Method for the Fish-Eye Lens using Photogrammetric Techniques)

  • 강진아;박재민;김병국
    • 한국측량학회:학술대회논문집
    • /
    • 한국측량학회 2007년도 춘계학술발표회 논문집
    • /
    • pp.161-164
    • /
    • 2007
  • The paper studies in the wide-angle lens and distortion tendency and employs the correction techniques suitable to the fish-eye lens using the existing photographic survey methods. After carrying out the calibration of the the fish-eye lens, we calculated the correction parameters, and then developed the method that convert the original image-point to new image-point correcting distortion. The objectives of suggested calibration method in this paper are to calibrate the image of the the fish-eye lens used in the computer-vision and the control-instrumentation field widely. The proposed technique expects to improve the accuracy of the image of the fish-eye lens in the indoor tracking and monitoring field. Also the referenced cross point auto-extraction program is embodied for improving efficiency of the lens correction techniques. Consequently, this calibration method would be applied to the automated distorting correction method on not only the fish-eye lens also general lens.

  • PDF

계측기기 자동 교정프로그램 개발 (Development of Auto Calibration Program on Instruments)

  • 조현섭;오명관
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2009년도 추계학술발표논문집
    • /
    • pp.636-639
    • /
    • 2009
  • In spite of the presence of various kind of Integrated Circuits it's not always easy to get the right part. Besides, it is hard to find a vendor for a small quantity consumers like who develop prototype applications. In this study, we've tried to get the logical signals from the PC based device we've developed that correspondents with the real ICs. It can emulate decoder ICs, multiplexers, demultiplexers and basic logic gates.

  • PDF

계측기기 자동교정 및 모니터링 기술개발 (Development of auto calibration program for instruments)

  • 조현섭;민진경
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2007년도 춘계학술발표논문집
    • /
    • pp.154-157
    • /
    • 2007
  • 본 논문에서는 컴퓨터로 정밀 계측기기들을 자동 제어하고 데이터를 측정하기 위하여 기존의 상용 프로그램을 사용하지 않고 Excel VBA(Visual Basic for Applications)를 이용하는 방법에 대하여 연구 하였다. 이는 반복측정 및 통계적 수치계산 등에서 많은 장점을 지니고 있어 수많은 국가교정기관 및 일반 산업체에서 유용하게 사용될 수 있으리라 사료된다.

  • PDF

VBA를 이용한 계측기기 자동 교정용 프로그램 개발 (Development of auto calibration program for instruments by Excel VBA)

  • 조현섭;박종천;이근왕;오훈
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 하계학술대회 논문집 D
    • /
    • pp.2480-2483
    • /
    • 2004
  • 본 논문에서는 컴퓨터로 정밀 계측기기들을 자동 제어하고 데이터를 측정하기 위하여 기존의 상용 프로그램을 사용하지 않고 Excel VBA(Visual Basic for Applications)를 이용하는 방법에 대하여 연구하였다. 이는 반복측정 및 통계적 수치계산 등에서 많은 장점을 지니고 있어 수많은 국가교정기관 및 일반 산업체에서 유용하게 사용될 수 있으리라 사료된다.

  • PDF

정밀 계측기기 자동 교정용 프로그램 개발 (Development of auto calibration program for instruments)

  • 조현섭;김희숙
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2006년도 춘계학술발표논문집
    • /
    • pp.330-334
    • /
    • 2006
  • 본 논문에서는 컴퓨터로 정밀 계측기기들을 자동 제어하고 데이터를 측정하기 위하여 기존의 상용 프로그램을 사용하지 않고 Excel VBA(Visual Basic for Applications)를 이용하는 방법에 대하여 연구하였다. 이는 반복측정 및 통계적 수치계산 등에서 많은 장점을 지니고 있어 수많은 국가교정기관 및 일반 산업체에서 유용하게 사용될 수 있을 것으로 사료된다.

  • PDF

정밀 계측기기 자동교정 프로그램 개발 (Development of auto calibration program for exact instruments)

  • 조현섭
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2009년도 춘계학술발표논문집
    • /
    • pp.446-449
    • /
    • 2009
  • 본 논문에서는 컴퓨터로 정밀 계측기기을 자동 제어하고 데이터를 측정하기 위하여 기존의 상용 프로그램을 사용하지 않고 Excel VBA(Visual Basic for Applications)를 이용하는 방법에 대하여 연구하였다. 이는 반복측정 및 통계적 수치계산 등에서 많은 장점을 지니고 있어 수많은 국가교정기관 및 일반 산업체에서 유용하게 사용될 수 있으리라 사료된다.

  • PDF

Excel VBA를 이용한 계측기기 자동 교정용 프로그램 개발 (Development of auto calibration program for instruments by Excel VBA)

  • 조현섭;송용화;이흥원;윤종민
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2003년도 춘계학술발표논문집
    • /
    • pp.203-207
    • /
    • 2003
  • 본 논문에서는 컴퓨터로 정밀 계측기 기들을 자동 제어하고 데이터? 측정하기 위하여 기존의 상용 프로그램을 사용하지 않고 Extol VBA(Visual Basic for Applications)를 이용하는 방법에 대하여 연구하였다. 이는 반복측정 및 통계적 수치계산 둥에서 많은 장점을 지니고 있어 수많은 국가교정기관 및 일반 산업체에서 유용하게 사용될 수 있으리라 사료된다.

  • PDF

Laser imager의 성능관리에 대한 연구

  • 이형진;인경환;이원홍;김건중
    • 대한디지털의료영상학회논문지
    • /
    • 제3권1호
    • /
    • pp.126-132
    • /
    • 1997
  • Purpose : To apply to Program of Auto processor quality control after comparison of Film density variations with amendments to Auto density by using Check density program and Adjust density program of calibration mode into the Laser imager. Methods : Observe Check and Adjust density variations on the Control chart with standard step and value during seven months from December, 1995 to June, 1956 extending twice a week. (1) Measure density value on the steps after printing out 17-step sensitometric pattern of the Check density program. (2) In the same way, measure density values after amending density by using Adjust density program If they are exceeding allowable error limit. Results : In case of Check density program, the exceeding limit rates of Density difference(DD) and Middle density(MD) are: FL-IM3543 DD=75%. MD=72.5%, FL-IMD DD=0%. MD=30.8%(14.5%) After amending density by using Adjust density program, the exceeding limit rates of all both Laser imager were zero percent. The standard deviations are show lower FL-IM D than FL-IM3543 on the Check density control chart, but higher on the Adjust density control chart. Conclusion : (1) Check density variations by printingout sensitometric pattern extending once a week at least for quality control of the Laser imager. (2) In case of a dusty place, check the Laser beam transmission after cleaning Laser optical unit extending once a month. (3) Be sure to measure and check density values by using adjust density program if they are exceeding allowable error limit. (4) Maintain much better film density by performing the adjust density program even if check density values are existed within normal limit.

  • PDF