• Journal of Korean Institute of Industrial Engineers
• /
• v.19 no.4
• /
• pp.71-86
• /
• 1993

In design stage of a plastic injection mold, basic entities of various kinds are introduced under the concept of Group Technology to produce a full drawings of the mold more effectively Most of the entity data should be extracted from the assembly drawing by pattern matching technique. An automated design system is developed using the extracted data of entities and thus shows a good interfaces between the design stage and producing part explosion without any manual conversion procedure under the AutoCAD environment.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2004.05a
• /
• pp.202-206
• /
• 2004

본 연구에서는 고밀도로 백색 발광다이오드를 웨이퍼 상에 제작하기 위한 제조공정에 필요한 포토마스크를 제작하는 연구를 수행하였다. 발광다이오드 한 개의 패턴을 웨이퍼상에 연속적으로 배열하여 이를 병렬로 연결하는 금속배선을 고려하였다. AutoCAD의 DWG 파일로 캐드작업을 수행하여 이를 DXF 파일로 변환하였으며, 레이저빔으로 스켄하여 소다라임 유리판 위에 크롬을 식각함으로써 포토마스크를 제작하였다. 이는 기존에 제작된 개별칩 형태의 발광다이오드 제작공정을 집적공정화함으로써 웨이퍼상에서 전면 발광하는 조명광원의 구조를 갖는다. 또한 이를 활용하여 백색 발광다이오드 집적칩을 제작하려 한다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2004.05a
• /
• pp.671-674
• /
• 2004

본 논문에서는 가구 인테리어를 위해 사전에 제작된 가구의 배치를 인터렉티브하게 시뮬레이션할 수 있도록 3D Visual 시뮬레이터 시스템을 개발하고자 한다. AutoCAD에서 제작된 도면파일(*.dxf)로 가상공간을 구성하고 3D MAX에서 Import된 Object 파일(*.3ds)을 Load하여 사용자가 쉽게 배치할 수 있도록 하는 것에 주안점을 두었다. 구성된 장면에 현실감을 주기 위해 고급 Rendering 기술 구현 또한 목표로 한다. 구축된 공간과 Object에는 텍스쳐 매핑과 Display Edit 기능을 구현하여 최대한 현실적인 시뮬레이터의 기능을 살릴 수 있도록 개발한다.

• Journal of Korean Society of Forest Science
• /
• v.104 no.1
• /
• pp.98-103
• /
• 2015

This study was conducted to analyze the running stability of a semi-crawler type mini-forwarder. The running stability analysis was performed by using a dynamic analysis program, RecurDyn. Physical properties of the semi-crawler type mini-forwarder was performed by using 3D CAD modeler, AutoCAD 3D. As a result from the computer simulation of stationary sideways overturning, it was found that the semi-crawler type mini-forwarder runs safely on a road with a slope not bigger than $20^{\circ}$ regardless whether it is empty or loaded, but in case of a road with a slope bigger than $20^{\circ}$, it is assumed that it is difficult for the car to run safely due to some dangers. In addition, it was found that the critical slope of its sideways overturning gets much smaller when empty since the location of its gravity center is elevated and much higher when it is loaded. As a result from the computer simulation of its hill-climbing ability, since the running speed is unstable in case of a road with a vertical slope not smaller than $28^{\circ}$, it is assumed that it is safe to drive it on a road with a slope not bigger than $28^{\circ}$. Taking a look at the result from an analysis of the running safety when it passes an obstacle, it was observed that a front tire comes off the ground when the running speed of the car is 5 and 4 km per hour respectively when it is empty and loaded while the gravity center of the front tire is watched. When taking a look at the changes in the location of the gravity center of the rear wheel crawler shaft, it was not found that the shaft comes off the ground at the test speeds both when it is empty and loaded.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.2
• /
• pp.107-115
• /
• 2011

Purpose: To design and fabricate the distributed auto edging machine for the development. Methods: We got the necessary data needed in design by using CAD. Based on the these data, we fabricated the trial product for the development of the distributed auto edging machine. Results: The patternless mode could be operated by receiving the eyesize data from the auto lay-outer with the RS232C transmission system and the pattern mode could be operated by setting the pattern on the left side of the machine. The distributed auto edging machine were composed with combinations of many elements; head, auto arm, pattern clamp and grinding wheels. The head part controlled the grinding of ophthalmic lens by operating the vertical and horizontal motors. The wheels part was comprised of glass mode, plastic mode, V-bevel mode and polish mode. The slide in the auto arm was equipped on the below of the patten and the slide could hold up the pattern which was rotated by fixed shaft. The pattern clamp could move the head part to the up and down or right or left way by the manual operation of optometrists. Conclusions: We could succeed in making the trial product by applying it to the development of the distributed auto edging machine which could be used as the patternless mode and pattern mode, selectively. Therefore, it was confidently expected that this product was very helpful for the optometrists to dispense the ophthalmic lens because of its cost-efficiency and convenience.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.1
• /
• pp.44-53
• /
• 2009

The Purpose of this study is to find out necessity and possibility of low-rise high density housing improving an old residential district of hillside areas. Housing of hillside areas should be maintained and it is necessary to make topographical adaptation plan. For this purpose, we calculate the floor area ratio to break even on case study area by GIS date. As a result, we found out that floor area ratio as minimum qualifications for the feasibility of urban redevelopment is 180%, and carried out a landscape simulation to a low-rise high density housing by AutoCAD 2004 and ArcView 3.2a. In results of simulations, it reveals that a rule to low-rise high density housing effective for topographical adaptation development.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.50 no.5
• /
• pp.3-15
• /
• 2008

This study aims to simulate the 3 dimensional (3D) model of Keum-man connection canal using geographic information system (GIS) as well as considering design in viewpoint of engineering. The canal connects from Keumkang to Mangyungkang in order to supply fresh water into Saemankeum lake. This study used 3 dimensional spatial planning model (3DSPLAM) process to generate the 3D model, which has not only several planning layers in actual process, but also their corresponding layers in modeling process to simulate 3D space of rural villages. The discharge of the canal is $20m^3/s$ on slope of 1/28,400 in the canal length of 14.2km, which consists of pipe line and open channel. This study surveyed the route of the canal and its surrounding environment for facilities to make images in the 3D graphic model. Besides, the present study developed data set in GIS for geogrphical surface modeling as well as parameters in hydraulic analysis for water surface profile on the canal using HEC-RAS model. From the data set constructed, this study performed analysis of water surface profile with HEC-RAS, generation of digital elevation model (DEM) and 3D objects, design of the canal section and route on DEM in AutoCAD, and 3D canal model and its surrounding 3D space in 3DMAX with virtual reality. The study result showed that the process making 3D canal model tried in this study is very useful to generate computer graphic model with the designed canal on the surface of DEM. The generated 3D canal can be used to assist decision support for the canal policy.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.2
• /
• pp.117-124
• /
• 2012

Due to recent urban maintenance project for the aged towns, the reconstruction of apartments into super-high-rise and high-rise apartment structures has been approved for concentrated use of land, and accordingly the infringement on sunshine for nearby residential area is rising as a social issue. Especially the educational environment conditions according to infringement on sunshine in educational facilities are posing many problems. Accordingly in this study, for such sunshine analysis of educational environment, Auto $CAD^{(R)}$ software has been used to construct the 3D model for the educational facility structures. And with the simulation technique, the windows and the schoolyard of the education facility were set to be the lighting standard surface to take measurements for the sunshine environment of the educational facilities by the minute from 8:00AM until 4:00PM for the sunshine amount by true solar time according to the movement of the sun. Also, the sunshine environment of the education facility according to the damage before/after new construction of apartments was charted, and through comparison with the video produced by sun shadow projection method, the sunshine amount of the educational environment could be verified. In future, it is expected to be efficiently used in the sunshine analysis of education environment utilizing such simulation techniques.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.844-847
• /
• 2005

A seamless analysis of complex geometry is one of greatly interesting topic. However, there are still gaps between the industrial applications and fundamental academic studies owing to time consuming modeling process. To resolve this problem, an auto mesh generation program based on grid-based approach has been developed for IT-product in the present study. At first, base mesh and skin mesh are generated using the information of entities which extracted from IGES file. Secondly the provisional core mesh with rugged boundary geometry is constructed by superimposing the skin mesh as well as the base mesh generated from the CAD model. Finally, the positions of boundary nodes are adjusted to make a qualified mesh by adapting node modification and smoothing techniques. Also, for the sake of verification of mesh quality, the hexahedral auto mesh constructed by the program is compared with the corresponding tetrahedral free mesh and hexahedral mapped mesh through static finite element analyses. Thereby, it is anticipated that the grid-based approach can be used as a promising pre-processor for integrity evaluation of various IT-products.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.1
• /
• pp.11-19
• /
• 2002

This study described computer aided die design system for cold forging of non-axisymmetric parts such as gears and splines. To design the cold forging die, an integrated approach based on a rule-base system and commercial F. E. code were adopted. This system is implemented on the personal computer and its environment is a commercial CAD package named as Auto CAD. The system includes four modules. In the initial data input module, variables which are necessary to design of die are inputted by user and die material are selected from the database according to the variables. In the analysis and redesign module, stress distribution acting on the designed die is analyzed by commercial FEM code NISA II with elastic mode. If die failure predicted, the designed die would modified in four ways to prevent die failure in both states of stress free and pressurizing. The developed system provides useful date and powerful capabilities for die design of non-axisymmetric parts.