• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1996년도 제10회 학술발표회 논문개요집
• /
• pp.156-156
• /
• 1996

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.271-271
• /
• 2013

The defect states of a Ar-sputtered SiO2 surface on Si (001) were investigated using Auger electron spectroscopy (AES) and reflection electron energy loss spectroscopy (REELS). The REELS spectra at the primary electron energy of 500 eV showedthat three peaks at 2.5, 5.1, and 7.2 eV were found within the band gap after sputtering. These peaks do not appear at the primary electron energies of 1,000 and 1,500 eV, which means that the defect states are located at the extreme surface of a SiO2/Si thin film. According to the calculations, two peaks at 7.2 and 5.1 eV are related to neutral oxygen vacancies. However, the third peak at 2.5 eV has never been previously reported and the theories proposed that this defect state may be due to Si-Si bonding. Our Auger data showed that a peak for Si-Si bonding at 89 eV appears after Ar ion sputtering on the surface of the sample, which is consistent with the theoretical models.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.175.1-175.1
• /
• 2015

CuSn thin films were deposited by rf magnetron co-sputtering method with pure Cu and Sn metal targets with a variety of rf powers. CuSn thin films were studied with a surface profiler (alpha step), X-ray photoelectron spectroscopy (XPS), X-ray induced Auger electron spectroscopy (XAES), X-ray diffraction (XRD), and contact angle measurement. The thickness of CuSn thin films was fixed at $200{\pm}10nm$ and deposition rate was calculated by the measured with a surface profiler. From the survey XPS spectra, the characteristic peaks of Cu and Sn were observed. Therefore, CuSn thin films were successfully synthesized on the Si (100) substrate. The oxidation state and chemical environment of Cu and Sn were investigated with the binding energy regions of Cu 2p XPS spectra, Sn 3d XPS spectra, and Cu LMM Auger spectra. Change of the crystallinity of the films was observed with XRD spectra. Using contact angle measurement, surface free energy (SFE) and wettability of the CuSn thin films were studied with distilled water (DW) and ethylene glycol (EG).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1996년도 제10회 학술발표회 논문개요집
• /
• pp.165-165
• /
• 1996

• E2M - 전기 전자와 첨단 소재
• /
• 제11권10호
• /
• pp.66-71
• /
• 1998

Plasma polymerized hexamethyldisiloxane (PPHMDSO) thin films were produced using an electrode capacitively coupled apparatus. Fourier transform infrared spectroscopy analysis indicated that the thin film spectra are composed not only of the corresponding monomer bands but also of several new bands. Auger electron spectroscopy analysis indicated that the permeation depth of aluminum into the films is ca. 30nm when top electrode is deposited by evaporation aluminum. The increase of relative dielectric constant and decrease of dielectric loss tangent with the discharge power is originated from high cross-link of the films.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1994년도 추계 학술발표 강연 및 논문 개요집
• /
• pp.79-80
• /
• 1994

A systematic study on isoelectronic impurities in thin-film eletroluminescent devices (TFELD) has been made on the basis of the experimental analysis aimed at a survey for the blue-emitting materials. Codoping effects of isoelectronic impurities, such as oxygen(O), tellurium(Te), and lithium(Li), on the emissive characteristics of ZnS:Ce$^{3+}$ and ZnS:Tm$^{3+}$TFELD have been investigated by means of the X-ray diffraction studies, the Auger electron spectroscopy, the cathodoluminescent spectra, and the electroluminescent spectra. Experiment results reveal that oxygen codoping gives rise to an increase of the luminance, due to a suppression of the nonradiative energy transfer via sulfur vacancies Te codoping in ZnS:Ce$^{3+}$ TFELD result in a large change in the crystal field around Ce$^{3+}$ ions. Li codoping in ZnS:Tm$^{3+}$ TFELD causes the luminance to increase slightly, due to a lowering in the symmetry of Tm$^{3+}$ions. Likewise, the experimental results suggest strongly that an Auger-type enegy loss via lattece defects such an sulfur vacancies acts as a non-emissive in TFELD.ve in TFELD.

• 한국진공학회지
• /
• 제5권3호
• /
• pp.188-193
• /
• 1996

A new display -type spherical mirror analyzer has been characterized in terms of the performance and the auger spectra taken by using it. The final goal with the analyzer is to devleop SET(Surface Electron Spectroscopic Tomography) which is capable to provide a 3-dimensional layer-by-layer information nondestructively. This kind of analyzer was originally designed by H.Daimon. The main feature is to display 2-dimensional electronic structures directly onto a screen. In our case, an external micro-electron beam was employed as an excitation source. However, this invokes various problems because of the interference between the electron beam and the analyzer. The problems have been solved through the optimization of various parameters of the analyzer.

• 한국재료학회지
• /
• 제6권2호
• /
• pp.158-165
• /
• 1996

열증착기(thermal evaporator)로 증착시킨 Cu를 상온에서 3.5M CuCl2+0.5M HCI+0.5MKCI 용액을 사용하여 습식각하고 2일간 대기중 노출시킨 후 X-선 광전자 분광기를 이용하여 표면의 결합상태를 관찰하였다. 그 결과 습식식각된 Cu 표면에서는 C, O, Ci 및 Cu가 존재함을 알 수 있었다. 표면원소에 대한 오제이 전자 스펙트라(Auger electron spectra)와 광전자 스펙트라(photoelectron spectra)의 정량적인 비교를 통하여 표면의 모든 결합상태를 확인할 수 있었고 그 상대적인 양까지도 얻어낼 수 있었다. 식각된 Cu의 표면에는 Cu-Cu, 2Cu-O, Cu-Ci, Cu-2(OH), 및 Cu-2Cl의 결합상태가 존재함을 알 수 있었고, CuLMMAuger line spectrum의 관찰을 통하여 계산된 각 결합의 정량적인 비교를 검증할 수 있었다. 따라서 chemical shift가 거의 관찰되지 않아 결합상태 분리가 불가능한 식각된 구리표면의 정량적 결합상태는 각 결합상태의 상대적 비교를 통하여 얻어질 수 있음을 알 수 있었다.

• 센서학회지
• /
• 제5권1호
• /
• pp.51-56
• /
• 1996

Structural properties of rf sputtered boron nitride films were studied as a function of deposition parameters such as nitrogen pressure, substrate temperature and substrate bias using X-ray photoelectron spectroscopy and Auger electron spectroscopy. Composition and information on chemical bonding of resultant films was determined by XPS. XPS core level spectra showed that ratio of boron to nitrogen varied from 3.11 to 1.45 with respect to partial nitrogen pressure. Curve fitting of XPS spectra revealed three kinds of bonding mechanism of boron in the films. XPS peak positions of both B 1s and N 1s shifted to higher energy with higher nitrogen pressure as well as increase in substrate bias voltage. AES was used to see possible contamination of films by carbon or oxygen as well.

• 한국전기전자재료학회논문지
• /
• 제20권3호
• /
• pp.263-267
• /
• 2007

We investigate the influence of the ambient gas during thermal annealing on the photoluminescence (PL) properties of europium-silicate thin films. The films were fabricated on substrates by using a radio-frequency magnetron sputtering method and subsequent rapid thermal annealing (RTA). The mechanism for the formation of the europium silicates during the annealing process was investigated by using X-ray diffraction (XRD) spectroscopy, Auger electron spectroscopy (AES) and transmission electron microscopy (TEM). A series of narrow PL spectra from $Eu^{3+}$ ions was observed from the film annealed in $O_2$ ambient. Broad PL spectra associated with $Eu^{2+}$ ions, with a maximum intensity at 600 nm and a FWHM of 110 nm, were observed from the thin film annealed at $1000^{\circ}C$ in $N_2$ ambient.