• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.552-557
• /
• 2017

Wire, wireless digital broadcasting has sharply expanded with the birth of high definition TV since 2010, the use of duplex contents as well as simplex contents has rapidly increased. Currently, our satellite communications system adopted DVB by European digital broadcasting standardization organization as a standard of domestic data broadcasting, the method how to use selective contents has been studied variously according to the development of IPTV. Digital broadcasting utilizes the method using Transport Stream Packet(TSP) by the way of multiplexing of information in order to send multimedia information such as video, audio and data of MPEG-2, this streams include detail information on TV guide and program as well as video and audio information. In order to understand these data broadcasting system, this study realized TS analyzer that divides transport stream (TS) by packet in Linux environment, analyzes and prints by function, it can help the understanding of TS, the enhancement of stream parsing ability.

• Smart Media Journal
• /
• v.7 no.3
• /
• pp.29-34
• /
• 2018

This paper presents a study on adapting optical communication technology using infrared ray for the enhancement of hearing aids in noisy environment. The transmitter module containing microphone and infrared ray-emitting diode converts audio signal to infrared optical signal and sends it out in the air. The receiver module located in a distance receives the infrared signal, converts it to electrical signal, and transfers it to an input of a digital hearing aid. Especially, the receiver module needs to be small, low voltage, and consume low power since it will be attached to hearing aids. Experiments with applying infrared communication technology of digital modulation method and analog non-modulation method show that the analog non-modulation method is adequate for infrared communication of approximately 5m distance indoor. Prototypes of transmitter module and receiver module were manufactured, and internal parameters of the digital hearing aid were adjusted to confirm normal transmit-receive operation of audio signals.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.4
• /
• pp.270-277
• /
• 2010

In this paper, we proposed an algorithm that improves tone quality of noisy audio signals by using ICA(Independent Component Analysis) algorithm and perceptual filters. Many algorithms have been proposed to eliminate the noise from the audio signals, such as spectral subtraction method, perceptual filter, etc. The perceptual filter uses a noise that is acquired from silent ranges in the input signal. In this case, the improvement rate of tone quality decreases if the noise energy is changed by the environmental variation in a signal frame. But the proposed method estimates a noise that is changed at each frame using ICA algorithm. The estimated noise is applied to perceptual filter. To show the performance of the proposed algorithm, several tests are performed to various input signals. With the proposed algorithm, we could confirm the enhancement of tone quality in terms of segmental SNR (SSNR), noise-to-mask ratio (NMR) and Degradation Category Rating (DCR) test.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.6
• /
• pp.566-575
• /
• 2002

Low-titrate audio coding enables a number of Internet and mobile multimedia streaming service more efficiently. For the help of next-generation mobile telephone technologies and digital audio/video compression algorithm, we can enjoy the real-time multimedia contents on our mobile devices (cellular phone, PDA notebook, etc). But the limited available bandwidth of mobile communication network prohibits transmitting high-qualify AV contents. In addition, most bandwidth is assigned to transmit video contents. In this paper, we design a novel and simple method for reproducing high frequency components. The spectrum of high frequency components, which are lost by down-sampling, are modeled by the energy rate with low frequency band in Bark scale, and these values are multiplexed with conventional coded bitstream. At the decoder side, the high frequency components are reconstructed by duplicating with low frequency band spectrum at a rate of decoded energy rates. As a result of segmental SNR and MOS test, we convinced that our proposed method enhances the subjective sound quality only 10%∼20% additional bits. In addition, this proposed method can apply all kinds of frequency domain audio compression algorithms, such as MPEG-1/2, AAC, AC-3, and etc.

• Journal of Broadcast Engineering
• /
• v.2 no.2
• /
• pp.169-181
• /
• 1997

In this paper, we propose and discuss about image enhancement techniques for MPEG-4. which represents very low bit-rate, content-based. and object-based hierarchical audio-visual coding standard. The proposed enhancement technique removes undesired artifacts arising in the compression procedure and increase resolution in both spatial and temporal domains. In order to remove undesired artifacts. we divide the MPEG-4 video algorithm in two parts: MPEG-2 like part and the new part. For removing artifacts caused by the first part. we adopt the conventional blocking artifacts algorithm developed for MPEG-2. On the other hand for removing artifacts caused by the second part. we provide a new degradation model. and propose the corresponding image restoration method. For increasing resolution of the MPEG-4 images, we propose a general framework of multichannel image interpolation process. which includes both spatial and temporal interpolations. As the MPEG-4 standard is under development. various sophisticated techniques are considered. but research on image enhancement techniques is relatively underestimated. By this reason. additional image enhancement techniques will become very important issue in realization phase of MPEG-4.

• Journal of KIISE:Databases
• /
• v.27 no.2
• /
• pp.209-215
• /
• 2000

In the on-demand services like AOD(Audio On Demand) over the internet, existing operating systems cannot serve repeatedly requested data efficiently. This paper proposes a web cache architecture. It predicts the songs to be requested in near future, based on the intervals between the requests in the past on the same song and keeps the songs in the web cache. For the replacement strategy of the web cache, LFRR(Least Frequently Requested Recently) is proposed. LFRR replaces the song that has less probability to be requested in near future. The average of the intervals between the requests in the past and the new request is used as the probability of the requests. It is more likely to be requested in near future as the average is less. The web cache decreases the number of disk access extremely, and support to serve more users with restricted resources. From the simulation result based on the data at the AOD site currently operating, it is shown that the high performance enhancement is achieved.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.9
• /
• pp.47-54
• /
• 2023

Infants utilize crying as a non-verbal means of communication [1]. However, deciphering infant cries presents challenges. Extensive research has been conducted to interpret infant cry audios [2,3]. This paper proposes the classification of infant cries using 3D feature vectors augmented with various audio data techniques. A total of 5 classes (belly pain, burping, discomfort, hungry, tired) are employed in the study dataset. The data is augmented using 5 techniques (Pitch, Tempo, Shift, Mixup-noise, CutMix). Tempo, Shift, and CutMix augmentation techniques demonstrated improved performance. Ultimately, applying effective data augmentation techniques simultaneously resulted in a 17.75% performance enhancement compared to models using single feature vectors and original data.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.3
• /
• pp.184-193
• /
• 2007

Flash memory adoption in the mobile devices is increasing or vanous multimedia services such as audio, videos, and games. Although the traditional research issues such as out-place update, garbage collection, and wear-leveling are important, the performance, memory usage, and fast mount issues of flash memory file system are becoming much more important than ever because flash memory capacity is rapidly increasing. In this paper, we address the problems of the existing log-based flash memory file systems analytically and propose an efficient log-based file system, which produces higher performance, less memory usage and mount time than the existing log-based file systems. Our ideas are applied to a well-known log-based flash memory file system (YAFFS2) and the performance tests are conducted by comparing our prototype with YAFFS2. The experimental results show that our prototype achieves higher performance, less system memory usage, and faster mounting than YAFFS2, which is better than JFFS2.

• Phonetics and Speech Sciences
• /
• v.4 no.3
• /
• pp.119-125
• /
• 2012

This paper describes a new algorithm for encoding spectral shape and envelope in the generic mode of G.718 super-wide band (SWB). In the G.718 SWB coder, generic mode coding and sinusoidal enhancement are used for the quantization of modified discrete cosine transform (MDCT)-based parameters in the high frequency band. In the generic mode, the high frequency band is divided into sub-bands and for every sub-band the most similar match with the selected similarity criteria is searched from the coded and envelope normalized wideband content. In order to improve the quantization scheme in high frequency region of speech/audio signals, the modified generic mode by the improvement of the generic mode in G.718 SWB is proposed. In the proposed generic mode, perceptual vector quantization of spectral envelopes and the resolution increase for spectral copy are used. The performance of the proposed algorithm is evaluated in terms of objective quality. Experimental results show that the proposed algorithm increases the quality of sounds significantly.

• Journal of the Korean Society of Safety
• /
• v.14 no.2
• /
• pp.163-169
• /
• 1999

Safety education should not only prevent workers from industrial accidents but also contribute to improve the productivity of manufacturing plants or construction sites. In practice this do not happen because workers do not realize the importance of safety education. This study aims to suggest a methodology to improve safety education of construction sites by surveying conditions of safety education and the safety consciousness of workers and engineers. The results showed that most education except regular educations were nominally carried out. Lectures and audio-visual education were mainly used as educational methods. After trainees attended the education session they completed a written survey, the most dissatisfied factor about safety education was education circumstances, of which rate was around 36%. The proportion of construction engineers who thought that safety management was contributable to cost reduction was 35%, to construction period 20%, and to quality enhancement 48%. Based on these results, this research pointed out the need to review training manuals, the development of educational programs, improvement of educational facilities to improve safety education of construction sites, and finally to discussed these issues.