• 한국공간정보시스템학회:학술대회논문집
• /
• 2007.06a
• /
• pp.203-211
• /
• 2007

세계화의 빠른 진행과 더불어 외국에 대한 정확한 인식은 매우 중요한 문제로 등장하였다. 아직도 사실적 오류와 더불어 국제관계에서의 위치 때문에 많은 오류가 남아 있는 점도 사실이다. 그 가운데 미국의 위성영상서비스 가운데 가장 대표적인 구글사의 검색서비스와 미국지리정보국의 지명데이터베이스에 관한 내용을 분석함으로서 문제의 뿌리가 어디인지를 밝히고자 하였다. 이미 구글에 관련된 논문은 Science Direct 검색결과 69개가 검색되고 있을 만큼 전세계적 문화적 영향력을 가지고 있다. 본고에서는 전 세계의 지명을 영어로 서비스하고 있는 구글사와 미국의 지명 DB내에 있는 오류사례를 찾아내고, 그 유형을 분석하고, 특히 일제의 강점을 당했던 한국과 대만사례를 비교하는 데 있다. 대만 역시 1945년 제2차 세계대전의 종전으로 인해 일본의 영향에서 벗어나게 되었다. 따라서 지명에도 일본의 영향이 크게 남아 있을 것으로 보고 앞서 나온 유형대로 몇 개의 분석을 실시하였다. 그 중 대표적인 것을 들면, 경상남도 남해군 일원의 위성영상을 보면 최소한 3개의 일본식 지명이 나타난다. 우선 해양지명으로 미조만은 Mijo-wan으로 앵강만은 Oko-wan으로 표시되어 있고, 천황산은 Tenno San이라는 지명으로 나타나고 있다. 제주도의 한라산을 지칭하는 표준어는 Halla-san으로 등재되어 있으나 이명으로 소개되어 있는 것이 무려 11개나 등록되어 있는 것으로 파악되었다. Halla-san에 대한 미국의 NGA(National Geospatial-Intelligence Agency)의 지명정보 데이터베이스에서 검색한 결과는 아래와 같다. 앞의 간라산 또는 간다산 등은 일본식 표기임이 확실하며 여기에 오크랜드산(Auckland, Mount)이라고 또한 표기되어 있음을 확인할 수 있다. 대만의 경우 총 1,280개의 산악명과 산맥명이 등재되어 있으니 일본어 표기는 하나도 없으며, 영어로 Central Mountains와 Seaboard Mountains두개만 영문표기 지명이 등재되어 있을 뿐이며, 그 가운데 12개는 한자로 표기되어 있다. 국내의 지명이 모두 영문 알파벳으로 표기된 것과는 달리 대만의 경우 한자지명이 그대로 데이터베이스에 등재되어 있다. 하천의 경우를 분석해보면 1485개의 지명이 등록되어 있으며 이 가운데 24개는 한자지명으로 표기되어 있다. 유형별 분석을 통한 연구결과가 올바른 지명 찾기에 기여하고, 독도와 백두산에 국한된 지명논쟁의 근간을 공고히 하는데 기여할 것으로 사료된다.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.1
• /
• pp.547-552
• /
• 2013

To investigate patient, cancer and treatment characteristics in females with breast cancer from more remote areas of Australia, to better understand reasons for their poorer outcomes, bi-variable and multivariable analyses were undertaken using the National Breast Cancer Audit database of the Society of Breast Surgeons of Australia and New Zealand. Results indicated that patients from more remote areas were more likely to be of lower socio-economic status and be treated in earlier diagnostic epochs and at inner regional and remote rather than major city centres. They were also more likely to be treated by low case load surgeons, although this finding was only of marginal statistical significance in multivariable analysis (p=0.074). Patients from more remote areas were less likely than those from major cities to be treated by breast conserving surgery, as opposed to mastectomy, and less likely to have adjuvant radiotherapy when having breast conserving surgery. They had a higher rate of adjuvant chemotherapy. Further monitoring will be important to determine whether breast conserving surgery and adjuvant radiotherapy utilization increase in rural patients following the introduction of regional cancer centres recently funded to improve service access in these areas.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.7 no.4
• /
• pp.123-130
• /
• 2012

The automobile industry has been rapidly developing and the manufacturers in Korea as well as auto makers in other advanced countries are putting every ounce of their energies in securing their competitive edges in technology and in marketing. To that purpose, each company focuses on (i) reducing costs and (ii) improving productivity. We believe that the improved productivity can be capitalized by a set of various factors including improved organization-internal environment and employees' job satisfaction. The present research aims to identify how the internal elements contribute and lead to improved productivity. The present paper is a report of an empirical survey performed to 161 employees working in small and medium-sized firms in the automobile industry. After testing reliability and validity of the collected data, we have performed structural equation analysis using Amos of SPSS and tested a set of research hypotheses and models. The reported results will clarify the factors that influence productivity and job satisfaction and also shed light on the directions for strategic polices to keep up with the ever changing climate of the industry.

• Food Science of Animal Resources
• /
• v.36 no.4
• /
• pp.516-522
• /
• 2016

Goat milk is highly nutritious and is consumed in many countries, but the development of functional foods from goat milk has been slow compared to that for other types of milk. The aim of this study was to develop a goat milk protein hydrolysate (GMPH) with enhanced digestibility and better hypoallergenic properties in comparison with other protein sources such as ovalbumin and soy protein. Goat milk protein was digested with four commercial food-grade proteases (separately) under various conditions to achieve the best hydrolysis of α_s -casein and β-lactoglobulin. It was shown that treatment with alcalase (0.4%, 60℃ for 30 min) effectively degraded these two proteins, as determined by SDS-PAGE, measurement of nonprotein nitrogen content, and reverse-phase high-performance liquid chromatography. Hydrolysis with alcalase resulted in a significant decrease in β-lactoglobulin concentration (almost to nil) and a ~40% reduction in the level of α_s-casein. Quantification of histamine and TNF-α released from HMC-1 cells (human mast cell line) showed that the GMPH did not induce an allergic response when compared to the control. Hence, the GMPH may be useful for development of novel foods for infants, the elderly, and convalescent patients, to replace cow milk.

• Steel and Composite Structures
• /
• v.27 no.3
• /
• pp.337-353
• /
• 2018

In previous weak-axis moment connection tests, brittle fracture always initiated near the edge of the beam flange groove weld due to force flow towards the stiffer column flanges, which is the opposite pattern as strong-axis moment connections. As part of the China NSFC (51278061) study, this paper tested two full-scale novel weak-axis reduced beam section moment connections, including one exterior frame connection specimen SJ-1 under beam end monotonic loading and one interior frame joint specimen SJ-2 under column top cyclic loading. Test results showed that these two specimens were able to satisfy the demands of FEMA-267 (1995) or ANSI/AISC 341-10 (2010) without experiencing brittle fracture. A parametric analysis using the finite element software ABAQUS was carried out to better understand the cyclic performance of the novel weak-axis reduced beam section moment connections, and the influence of the distance between skin plate and reduced beam section, a, the length of the reduced beam section, b, and the cutting depth of the reduced beam section, c, on the cyclic performance was analyzed. It was found that increasing three parametric values reasonably is beneficial to forming beam plastic hinges, and increasing the parameter a is conducive to reducing stress concentration of beam flange groove welds while increasing the parameters b and c can only reduce the peak stress of beam flange groove welds. The rules recommended by FEMA350 (2000) are suitable for designing the proposed weak-axis RBS moment connection, and a proven calculation formulation is given to determine the thickness of skin plate, the key components in the proposed weak-axis connections. Based on the experimental and numerical results, a design procedure for the proposed weak-axis RBS moment connections was developed.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.4
• /
• pp.1675-1682
• /
• 2012

Aim: The study aim was to determine the frequency with which women decline clinicians' treatment recommendations and variations in this frequency by age, cancer and service descriptors. Design: The study included 36,775 women diagnosed with early invasive breast cancer in 1998-2005 and attending Australian and New Zealand breast surgeons. Rate ratios for declining treatment were examined by descriptor, using bilateral and multiple logistic regression analyses. Proportional hazards regression was used in exploratory analyses of associations with breast cancer death. Results: 3.4% of women declined a recommended treatment of some type, ranging from 2.6% for women under 40 years to 5.8% for those aged 80 years or more, and with parallel increases by age presenting for declining radiotherapy (p<0.001) and axillary surgery (p=0.006). Multiple regression confirmed that common predictors of declining various treatments included low surgeon case load, treatment outside major city centres, and older age. Histological features suggesting a favourable prognosis were often predictive of declining various treatments, although reverse findings also applied with women with positive nodal status being more likely to decline a mastectomy and those with larger tumours more likely to decline chemotherapy. While survival analyses lacked statistical power due to small numbers, higher risks of breast cancer death were suggested, after adjusting for age and conventional clinical risk factors, (1) for women not receiving breast surgery for unstated reasons (RR=2.29; p<0.001); and (2) although not approaching statistical significance $p{\geq}0.200$), for women declining radiotherapy (RR=1.22), a systemic therapy (RR1.11), and more specifically, chemotherapy (RR=1.41). Conclusions: Women have the right to choose their treatments but reasons for declining recommendations require further study to ensure that choices are well informed and clinical outcomes are optimized.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.11
• /
• pp.6821-6832
• /
• 2013

Background: Soft-tissue sarcomas require tailored and multidisciplinary treatment and management. However, little is known about how sarcomas are treated and managed throughout the Asia-Pacific region. Materials and Methods: MEDLINE was systematically searched using prespecified criteria. Publications (previous 10 years) that reported tumour characteristics, treatment patterns, survival outcomes, and/or safety outcomes of patients with soft-tissue sarcoma were selected. Exclusion criteria were studies of patients <18 years of age; ${\leq}10$ patients; countries other than Australia, Hong Kong, Indonesia, Korea, Malaysia, New Zealand, Philippines, Singapore, Taiwan, or Thailand; >20% benign tumours; sarcomas located in bones or joints; gastrointestinal stromal tumour; Kaposi's sarcoma; or not reporting relevant outcomes. Results: Of the 1,822 publications retrieved, 35 (32 studies) were included. Nearly all patients (98%, 1,992/2,024; 31 studies) were treated with surgery, and more studies used adjuvant radiotherapy than chemotherapy (24 vs 17 studies). Survival outcomes and recurrence rates varied among the studies because of the different histotypes, sites, and disease stages assessed. Only 5 studies reported safety findings. Conclusions: These findings highlight the lack of specific data available about soft-tissue sarcomas in the Asia-Pacific region. Better efforts to understand how the sarcoma is managed and treated will help improve patient outcomes in the region.

• Steel and Composite Structures
• /
• v.26 no.3
• /
• pp.329-345
• /
• 2018

This paper systematically investigated the mechanical performance of the weak-axis cover-plate connection, including a beam end monotonic loading test and a column top cyclic loading test, and a series of parametric studies for exterior and interior joints under cyclic loading using a nonlinear finite element analysis program ABAQUS, focusing on the influences of the shape of top cover-plate, the length and thickness of the cover-plate, the thickness of the skin plate, and the steel material grade. Results showed that the strains at both edges of the beam flange were greater than the middle's, thus it is necessary to take some technical methods to ensure the construction quality of the beam flange groove weld. The plastic rotation of the exterior joint can satisfy the requirement of FEMA-267 (1995) of 0.03 rad, while only one side connection of interior joint satisfied ANSI/AISC 341-10 under the column top cyclic loading. Changing the shape or the thickness or the length of the cover-plate did not significantly affect the mechanical behaviors of frame joints no matter in exterior joints or interior joints. The length and thickness of the cover-plate recommended by FEMA 267 (1995) is also suitable to the weak-axis cover-plate joint. The minimum skin plate thickness and a design procedure for the weak-axis cover-plate connections were proposed finally.

• Archives of Plastic Surgery
• /
• v.41 no.5
• /
• pp.556-561
• /
• 2014

Background Groin dissections result in large wounds with exposed femoral vessels requiring soft tissue coverage, and the reconstructive options are diverse. In this study we reviewed our experience with the use of the pedicled anterolateral thigh and vertical rectus abdominis musculocutaneous flaps in the reconstruction of large groin wounds. Methods Groin reconstructions performed over a period of 10 years were evaluated, with a mean follow up of two years. We included all cases with large or complex (involving perineum) defects, which were reconstructed with the pedicled anterolateral thigh musculocutaneous or the vertical rectus abdominis musculocutaneous (VRAM) flaps. Smaller wounds which were covered with skin grafts, locally based flaps and pedicled muscle flaps were excluded. Results Twenty-three reconstructions were performed for large or complex groin defects, utilising the anterolateral thigh (n=10) and the vertical rectus abdominis (n=13) pedicled musculocutaneous flaps. Femoral vein reconstruction with a prosthetic graft was required in one patient, and a combination flap (VRAM and gracilis muscle flap) was performed in another. Satisfactory coverage was achieved in all cases without major complications. No free flaps were used in our series. Conclusions The anterolateral thigh and vertical rectus abdominis pedicled musculocutaneous flaps yielded consistent results with little morbidity in the reconstruction of large and complex groin defects. A combination of flaps can be used in cases requiring extensive cover.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.4
• /
• pp.279-288
• /
• 2005

The mesh selectivity of drum net traps for Buccinum opisoplectum Dall caught in the eastern sea of Korea was described. Several experiments were conducted between July 2003 and March 2004 and the data obtained from the experiment was fitted by SELECT (Share Each Length class's Catch Total) model with unequal fishing and sampling efforts. The selection curve was determined to be 'estimated fishing efficiency' by model deviance rather than AIC. However the fishing efficiency between 20mm and 35mm mesh size did not seem to be different. The $L_{50}$ lengths of the selectivity for the 55mm and 75mm mesh size were 65.4mm and 96.0mm, respectively.