• Physical Therapy Rehabilitation Science
• /
• v.12 no.3
• /
• pp.222-228
• /
• 2023

Objective: Training-related injuries and attrition put an additional burden on police and military institutions. Preventing and minimizing musculoskeletal injuries is the primary concern of the Abu Dhabi Police. Therefore, this study aimed to evaluate the correlation between functional movement screen, lower-limb strength, Y-balance test, grip strength and vertical jump and the incidence of musculoskeletal injuries among Abu Dhabi police recruits. Design: Observational analytical study. Methods: An observational study was conducted on 400 male police recruits of Abu Dhabi Police Academy. Physical performance was assessed before the 16-weeks basic police training. Spearman's correlation evaluated the correlation between the performance parameters and the outcome measures and logistic regression predicted the risk factors associated with musculoskeletal injuries. Results: 149 (34.4%) participants reported at least one injury during the basic police training. Comparison between injured and non-injured participants showed significant difference in mean right Y-balance, back-leg-chest dynamometer, and vertical jump (p=0.02, p=0.02, and p=0.04, respectively). Spearman's correlation showed a significant negative correlation between risk of injury and back-leg-chest dynamometer and right Y balance (ρ= -0.11, p=0.03). Logistic regression showed that back-leg-chest dynamometer and right Y balance were significant predictors of injury (p =.036 and p=0.037; Odds ratio=0.96; 95% CI (0.92, 0.99) and Odds ratio=0.99; 95% CI (0.98,0.99). Conclusions: Our findings suggest functional movement screen and grip strength may not independently predict injury rates, balance and lower-limb strength needs to be considered in injury prevention strategies to reduce musculoskeletal injuries.

• Journal of Korean Academy of Nursing
• /
• v.35 no.6
• /
• pp.1063-1071
• /
• 2005

Purpose: This study was done to develop and test validity and reliability of on instrument for predicting nursing intention for SARS patient care. Method: The psychometric properties of a SARS patient care attrition prediction tool, based on the Theory of Planned Behavior, were examined in this study. The Three-phase design involved a) salient beliefs generated from clinical nurses (n=43) b) content validation by expert panel evaluations(n=5) c) face validation by plot testing (n=10) d) and instrument validation in a cross sectional survey (n=299). Psychometric analysis of survey data provided empirical evidence of the construct validity and reliability of the instrument. Result: Principal component analysis verified the hypothesized 6-factor solution, explaining $68.2\%$ of variance, and Alpha coefficients of .7538 to .9389 indicated a high internal consistency of the instrument. Conclusion: The instrument can be used by nurse administrators and researcher to assess clinical nurses' salient beliefs about caring for SARS patients, guide tailored intervention strategies to effective caring, and evaluate the effectiveness of interventions.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.6
• /
• pp.233-241
• /
• 2008

The overlay multicast that has been recently presented as an alternative for the IP multicast needs scheduling method that can apply the system resource and the network bandwidth for the many users. We propose a efficient overlay multicasting network policy for multimedia services with composite stream service topology. And in order to evaluate the ability of the proposed scheme's performance, We test the performance of multi_casting nodes with RTT values, the bandwidth attrition rate for building the network topology and MOR effects with Overcast[5] The result of simulation shows improves about $8{\sim}20%$ of performance.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.2
• /
• pp.151-155
• /
• 2008

KHST(Korean High Speed Train) has been utilized the total measurement system which evaluates the efficiency and a breakdown of the vehicle and it's results effect to secure reliability of the vehicle. Generally KHST has been received pulse signals from the wheel. It calculates the travel distance after counter the signals to confirm location information of the vehicle. However, there is a limit to measure the location of the vehicle due to slip, slide and the wheel attrition. We have developed a new measurement system by using GPS to complement those errors. In general, GPS receivers are composed of an antenna, tuned to the frequencies transmitted by the satellites, receiver-processors, and a highly-stable clock The GPS mounted on the roof of TT4 in KHST receives a signal from the RS232 communication port. It is connected to the network system in TT3 after converting with TCPIP communication. It is able to track the position of vehicle and synchronize the signal from different measurement system simultaneously. Therefore it is able to chase the fault occurrence, track inspection and electrical interruption at real-time situation more accurately. There is not an error coursed by vehicle conditions such as slip and the slide.

• Economic and Environmental Geology
• /
• v.37 no.1
• /
• pp.143-151
• /
• 2004

This study focused on examining the possibility of recycling mine solid waste as environmental materials, especially for porous media. Basic properties including mineralogical compositions, chemical compositions, and particle size distribution of the tailings from the Sangdong W mine were checked. The mineralogical and chemical compositions of the tailings samples were not much different in depth. According to Korean Standard Leaching Test for Wastes(KSLT), concentrations of heavy metals leached from the tailings were below the standard values. As a result of particle size analysis, the median diameter (d$_{50}$) of the tailings was in the range of 10 to 30 ${\mu}{\textrm}{m}$. The stable tailings slurry made up of 3 ${\mu}{\textrm}{m}$ in d$_{50}$ was prepared using Attrition Mill. The milling condition was 40 vol% in slurry concentration, 700 rpm in stirring speed, and 1 hour in milling time. PEI was added as dispersing agent. Concentrated slurry was extended to 3 times by foaming method. In the case of 3 times foamed slurry, the total and open porosity of ceramic supports sintered at 1,075$^{\circ}C$ for 90 minutes was about 80% and 72%, respectively. Pore size was in the range of 30∼350${\mu}{\textrm}{m}$. Therefore, the tailings could be recycled starting material for environmental materials such as macroporous ceramic support.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.21-21
• /
• 2009

후막 광식각 기술을 이용하여 형성된 Ag 전극과 LTCC 기판 사이의 접착력을 향상시키기 위하여 무기 바인더로서 anorthite, diopside 및 MLS-62 glass frit을 첨가하여 감광성 Ag paste를 제조하였다. 소성 후의 glass pool effect를 감소시키기 위해 attrition mill을 통하여 미세 glass 분말을 준비하였다. Glass frit은 Ag powder의 5vol%~25vol%의 함량으로 첨가하여 감광성 Ag paste를 제조하였고 패턴 형성 후 $850^{\circ}C$에서 1시간 소결하였다. 전극과 기판 사이의 접착력은 micro-ball shear test 법으로 측정하였으며, Ag 전극 부착력은 glass frit의 함량 증가에 따라 증가하다가 감소하는 경향을 보이는데, 이는 과량의 glass frit 첨가로 인한 전극 내부에 액상 풀의 형성에 기인한 것으로 보여진다. Ag 전극의 면저항은 glass frit의 함량이 증가함에 따라 $0.13m{\Omega}{/\square}$에서 $2.06m{\Omega}{/\square}$까지 증가하는 경향을 나타내었다. 소성 전후의 전극 패턴의-수축율은 $100{\mu}m$의 선폭을 기준으로 glass frit의 첨가랑이 증가할수록 43.3%에서 35.0%로 감소하였으며, 그 결과 최소 선폭 $25{\mu}m$의 미세 전극 패턴의 형성이 가능하였다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.2
• /
• pp.261-270
• /
• 2001

This study was performed to evaluate wear characteristics of light-cured composites when opposed by human enamel. Seven light-cured restorative composites were selected and enamel cusps sectioned from premolars. All samples were stored in distilled water at $37^{\circ}C$ for 10 days. 68.6 N of weight was loaded during the test. The measurements of vertical loss of enamel cusps, weight loss and volume loss of composites, and SEM observations of the polished and abraded surfaces were made after 30,000 cycles. The results obtained were summarized as follows; 1. The highest hardness value of 70.4 was observed in the Spectrum group and the lowest value of 19.8 was observed in the Heliomolar group. Results of Tukey test showed that an overall significant difference was indicated except the Spectrum, Z100 and Clearfil AP-X groups(p<0.05). 2. Enamel showed the good abrasion resistance against the Heliomolar group of microfilled composite and the Palpique Toughwell group containing the submicron hybrid type spherical fillers. 3. The abrasive wear resistance of hybrid composites was improved with the decrease of mean particle size and hybrid of submicron particle fillers. 4. SEM observation of worn surfaces revealed the protrusion, attrition and missing of fillers, cracks developing and delamination in the matrix.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.4
• /
• pp.206-213
• /
• 2019

Purpose: Most of studies dealing with abfractions are limited to the buccal surfaces of the teeth. In this study, we analyzed the cause for abfraction by investigating the incidence of palatal side abfractions in maxillary posterior teeth. Materials and Methods: We investigated a total of 3193 maxillary posterior teeth by an intraoral examination, model observation, and observation of virtual model fabricated using model scanning. We recorded the results and classified them depending on the type of teeth, age, gender, and side of arches. We also performed Chi-square test to evaluate the statistical significance among the groups (α = 0.05). Results: The incidence of palatal side abfraction of the maxillary molars (10.8%) was higher than the premolars (6.8%), and among them, the incidence of the 1st molars (39.1%) were the highest. The incidence of palatal side abfraction increased with age and was statistically significant (P < 0.05). There was no statistical significance in the difference by gender (P > 0.05); in the case of arches, left arch showed higher incidence and it was statistically significant (P < 0.05). Conclusion: Palatal side abfraction in maxillary posterior teeth was frequently observed in the maxillary 1st molars, and the incidence increased with age. This result suggests that the main reason for abfraction is due to occlusal force.

• Strategy21
• /
• s.31
• /
• pp.57-84
• /
• 2013

North Korea's continuous threats and provocative behaviors have aggravated tension on the Korean peninsula particularly with the recent nuclear weapons test. South Korea's best way to cope with this situation is to maintain the balance among three policy directions: dialogue, sanctions, and deterrence. Among the three, I argue that deterrence should be prioritized. There are different sources of deterrence such as military power, economic power, and diplomatic clouts. States can build deterrence capability independently. Alternatively, they may do so through relations with other states including alliances, bilateral relations, or multilateral relations in the international community. What South Korea needs most urgently is to maintain deterrence against North Korea's local provocations through the enhancement of independent military capability particularly by addressing the asymmetric vulnerability between militaries of the South and the North. Most of all, the South Korean government should recognize the seriousness of the negative consequences that North Korea's 'Nuclear shadow strategy' would bring about for the inter-Korea relations and security situations in Northeast Asia. Based on this understanding, it should develop an 'assertive deterrence strategy' that emphasizes 'multi-purpose, multi-stage, and tailored deterrence whose main idea lies in punitive retaliation.' This deterrence strategy requires a flexible targeting policy and a variety of retaliatory measures capable of taking out all targets in North Korea. At the same time, the force structures of the army, the air force, and the navy should be improved in a way that maximizes their deterrence capability. For example, the army should work on expanding the guided missile command and the special forces command and reforming the reserve forces. The navy and the air force should increase striking capabilities including air-to-ground, ship-to-ground, and submarine-to-ground strikes to a great extent. The marine corps can enhance its deterrence capability by changing the force structure from the stationary defense-oriented one that would have to suffer some degree of troop attrition at the early stage of hostilities to the one that focuses on 'counteroffensive landing operations.' The government should continue efforts for defense reform in order to obtain these capabilities while building the 'Korean-style triad system' that consists of advanced air, ground, and surface/ subsurface weapon systems. Besides these measures, South Korea should start to acquire a minimum level of nuclear potential within the legal boundary that the international law defines. For this, South Korea should withdraw from the Nuclear Non-proliferation Treaty. Moreover, it should obtain the right to process and enrich uranium through changing the U.S.-South Korea nuclear cooperation treaty. Whether or not we should be armed with nuclear weapons should not be understood in terms of "all or nothing." We should consider an 'in-between' option as the Japanese case proves. With regard to the wartime OPCON transition, we need to re-consider the timing of the transition as an effort to demonstrate the costliness of North Korea's provocative behaviors. If impossible, South Korea should take measures to make the Strategic Alliance 2015 serve as a persisting deterrence system against North Korea. As the last point, all the following governments of South Korea should keep in mind that continuing reconciliatory efforts should always be pursued along with other security policies toward North Korea.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.1
• /
• pp.21-33
• /
• 2007

Statement of problem: The esthetic component of dental care has become increasingly more important, while new tooth-colored materials are continually marketed. Various new indirect composite materials have been developed with required advantages. The most recent development in the indirect composites has been the introduction of the second-generation laboratory composite or poly-glass materials. They are processed by different laboratory techniques based on combinations of heat, pressure, vacuum and light polymerization. Although, second generation products became available in 1995, their characteristics and clinical performance have not been adequately investigated. Purpose: The aim of this study was to measure the mechanical properties of the second generation indirect resin system and compare these with an existing universal direct composite resin. Material and method: In this study four indirect composite material (Adoro LC, BelleGlass HP, Tescera, Synfony) were tested for flexural strength, wear resistance, hardness and their degree of conversion against Z250, a light cure direct composite. Results: Within the limitations of this study, the following conclusions were drawn: 1. From the abrasion wear result, Adoro showed the least volume loss while Synfony showed the greatest volume loss. Z250 and BelleGlass HP didn't show significant difference (p>0.05), but they showed significant difference with other groups (p<0.05). From the attrition wear, BelleGlass HP showed the least volume loss and it didn’t show significant difference with Tescera (p>0.05). While Synfony showed the greatest volume loss that it showed significant difference with other groups (p>0.05). 2. Mean values of flexural strength by means of three point bending test was in the order of Z250, Adoro, Belleglass HP, Tescera and Synfony. Mean elastic modulus was in the order of Z250, BelleGlass HP, Tescera, Adoro and Synfony. 3. The result of Vicker‘s microhardness value showed that significantly higher value in Z250 (p<0.05), and is in the order of BelleGlass HP, Tescera, Adoro and Synfony. 4. The degree of conversion measured by FT-IR showed significantly higher value in BelleGlass HP (p<0.05), and is in the order of Adoro, Synfony, Tescera and Z250. Conclusion: Significant differences were found in the flexural strength, wear resistance, hardness and their degree of conversion.