• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.1
• /
• pp.147-152
• /
• 2008

This paper has been fabricated the two different type of variable attenuators using a characteristics of a 3 dB directional coupler and pin diodes. One was not analyzed using the conventional even-odd modes but used simple two-port techniques. The resulting scattering parameters described operation characteristics for the general case where the terminating impedances are equal and unequal. After analyzing resistor role of the ${\pi}$ type fixed attenuator. this paper used a pin diode instead of a resistor. The variable attenuators were fabricated using pin diodes for current-controlled attenuation on the coupled ports of a 3 dB branch-line coupler and ${\pi}$ type fixed attenuator. The realized variable attenuators have more than 33 dB attenuation ranges at 2.1 GHz. and the input and output reflection coefficients are less than -13 dB. These results could be applied to mobile communication systems. It can be varied gain of the power amplifier according to change a outdoor environmental temperature and improved linearity.

• Journal of Advanced Navigation Technology
• /
• v.13 no.3
• /
• pp.399-405
• /
• 2009

This paper proposes a design of attenuator based on meta-material structure and its application. The unit-cell attenuator based on the lossy transmission line consists of the CRLH(Composite Right/Left Handed) transmission line and PIN diodes to be controlled internal loss according to diode bias voltage to change resistance of diode. Also, to reduce the initial losses, there is used parallel connection of PIN diodes. To increase attenuations, it is connected a cascade unit-cell of attenuator with periodic structure. The attenuation quantities of unit-cell are about 10dB and phase variations are 15o maximum at 1.5 GHz ~ 2.5 GHz. Also, its application is represented a vector modulator.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.306-308
• /
• 2003

본 논문은 variable optical attenuator(VOA)에 응용하기 위한 comb actuator를 설정하기 위해, 요구되는 조건에 가장 적합한 comb actuator를 설계하기 위한 방법을 제시한다. VOA 응용을 위한 comb actuator 설계에서 고려되어야 하는 조건들은 comb actuator의 performance(변위, 공진 주파수), 구동 전압 그리고 공정의 한계(최소 선폭, 최소 간격, 두께) 등이다. 이러한 조건들이 정해지면, 이 조건들을 comb actuator의 구동력과 지지빔 스프링에 의한 복원력에 대입하여 두 힘이 평형일 때의 조건으로부터 comb finger의 수와 구동부의 질량 및 지지빔의 길이 등의 선계 변수들을 정할 수 있다. 그리고 comb actuator의 질량으로 부터 구동부의 면적을 구할 수 있고, 이러한 조건에서 구한 지지빔의 면적과 비교하여 적절한 구동부의 면적을 설정한다. 이상의 내용을 조합해서 요구된 조건이 comb actuator 설계에 적합한지의 여부를 확인했고, VOA 응용을 위한 요구 조건에 맞는 comb actuator 설계를 했다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.6
• /
• pp.1109-1114
• /
• 2003

In this paper, the electric characteristic of the SGPS with slot in the ground plane is similar to the parallel resonant circuit. When the slot length in SGPS is equal to the half wavelength of specific frequency, the characteristic of SGPS represent the large attenuation at the specific frequency. We found out the relation between attenuation and resistor on the slot in SGPS and we designed the variable attenuator for MMIC using the variable resistor. This attenuator can be applied to AGC circuit in transceiver if the PIN diode is used replace for resistor.

• Journal of the Optical Society of Korea
• /
• v.13 no.3
• /
• pp.349-353
• /
• 2009

We propose a simple in-line variable optical attenuator (VOA) based on the bending effect of tapered single mode fibers. The influence of the taper structure and the reflective index of the external medium surrounding the taper region on the bending loss of the tapered fiber have been investigated experimentally. An attenuation range exceeding 35 dB and a very low excess loss of < 0.2 dB at 1550 nm were achieved. The measured polarization dependent loss of the present VOA at the attenuation level of 10 dB, 20 dB, and 30 dB were 0.1 dB, 0.2 dB, and 0.5 dB, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.4
• /
• pp.448-452
• /
• 2004

The micromachined variable optical attenuator(VOA) was presented in the paper. The VOA has two single mode fiber(SMF) aligned with free space and symmetric parallel plate actuator with microshutter, which can control a amount of light by driving the actuator. In the paper, analysis on driving performances of the VOA was performed and can be reduced threshold voltage through the decreasing displacement actuating range. This paper presents a VOA that is fabricated using bosch deep silicon etching process with silicon on insulator(SOD wafer. The VOA consists of driving electrode, ground electrode, actuating microshutter, and mechanical stopper. In this VOA, actuating shutter is driven by electrostatic force and the threshold voltage is close to 28V, 46V come along with the spring width of 5${\mu}{\textrm}{m}$, 7${\mu}{\textrm}{m}$ respectively. Attenuation range is measured from 2.4㏈ to 16.7㏈.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.1
• /
• pp.60-68
• /
• 2016

This paper presents a 6~18 GHz 7-bit digital-controlled attenuator. The proposed attenuator is based on switched-T architecture, but no inductor is used for minimum chip size. The designed attenuator was fabricated using $0.18{\mu}m$ CMOS process, and characterized using on-wafer testing setup. The resolution(minimum attenuation step) and the maximum attenuation range of the attenuator were measured to be 0.22 dB and 28 dB, respectively. The measured RMS attenuation error and the RMS phase error for 6~18 GHz were less than 0.26 dB and $3.2^{\circ}$, respectively. The reference state insertion loss was less than 12.4 dB at 6~18 GHz. The measured input and output return losses were better than 9.4 dB over all frequencies and attenuation states. The chip size is $0.11mm^2$ excluding pads.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.6
• /
• pp.1025-1033
• /
• 1987

This paper describes the development of a new type of an integrated optical adjustable attenuator using magneto-optic effects in 4-layer slab waveguide. The characteristics of the proposed structure are analyzed and evaluated. Furthermore, the fabrication method and attenuation characteristics have been tested by experimets, therby confirming qualitatively the validity of the design theory.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4A
• /
• pp.458-465
• /
• 2004

To reaffirm the use of a mainstream CMOS process for designing passive-like attenuator structures, a linearly controlled variable attenuator is realized with 0.35${\mu}{\textrm}{m}$ 2-poly 4-metal CMOS process. It uses the П configuration for large attenuation range and suitable matching property. Compared to conventional passive-like CMOS attenuators, it is demonstrated that this work advances the frequency band from MHz to ㎓ (DC- l㎓), and reduces the size to 700${\mu}{\textrm}{m}$${\times}$300${\mu}{\textrm}{m}$.. Both simulation results and test results are provided. They show the improved linear relation between attenuation and control voltage. It is very useful in CDMA or GSM band, which uses under 1㎓ frequency band. An alternative topology, Bridged-T configuration, is proposed to get over the limit of applications by elevating operation bandwidth. The proposed topology covers over DC-2㎓ frequency band, which means that the proposed architecture can cover the tripleband (800MHz CDMA/GSM, 1.5㎓ GPS, 1.9㎓z PCS system) in applications as well. The simulation results are provided.

• Journal of the Optical Society of Korea
• /
• v.8 no.2
• /
• pp.83-89
• /
• 2004

A variable optical attenuator with a bending-sensitive fiber (BSF) that can be used in optical networks is developed. The refractive index profile of the BSF is divided into four regions which are inner core, center dip of inner core, outer core and clad. The 3-dimensional finite difference beam propagation method (3D FD-BPM) is utilized to find the characteristics of the BSF, so the mode profile of the BSF and optical power attenuation according to the bending are investigated, and the equivalent model of the BSF is made. By using this equivalent model of the BSF, the BSF is fabricated, and the refractive index profile of the BSF is measured, which is similar to refractive index profile of the proposed BSF. The fabricated variable optical fiber attenuator (VOFA) consists of the BSF in a rectangular rubber ring with a fixed bend radius (BR) in a steady state. The VOFA using the proposed BSF was able to attenuate the optical power by more than about －38 ㏈ at certain wavelengths (1540∼1560 nm) based on adjusting the mechanical pressure applied to the upper surface of the rectangular rubber ring with the bent BSF. In addition, the proposed VOFA produced an insertion loss of 0.68 ㏈, polarization dependent loss (PDL) of about 0.5 ㏈, and return loss of less than －60 ㏈.