• KIEAE Journal
• /
• 제16권6호
• /
• pp.123-128
• /
• 2016

Purpose: In order to save the energy consumption of buildings, buildings have been constructed with high performance insulation or airtightness. However, high performance insulation or air tightness has led to a poor indoor air quality. Therefore, HRV(Heat Recovery Ventilator) has received attention to save the energy consumption and insure a good air quality. Because existing research is almost about the performance of HRV in residential buildings, This study analyzed the effect of HRV on cooling energy consumption in commercial office building. Method: This study was proceeded at commercial office building in In-cheon. In order to evaluate the energy consumption of HRV, this study proposed two methods: estimating energy consumption of the room installed AHU(Air Handling Unit) system; estimating energy consumption of the room installed HRV system. Therefore, comparison of two methods was proceeded to evaluate energy performance of each method. Result: As the result of comparison between rooms installed AHU and HRV, the experiment showed that energy consumption of the room installed HRV system is about 22% less than the room of AHU system. This conclusion is considered because the room installed HRV system have maintained temperature well at set point temperature $26^{\circ}C$.

• 마케팅과학연구
• /
• 제18권1호
• /
• pp.33-58
• /
• 2008

본 연구는 서비스실패가 아니라 제품실패 이후, 회복노력의 효과를 실패심각성에 따라 확인하는 것이다. 회복노력은 보상노력, 장점노력 및 단점노력으로 구분되었다. 보상노력은 실패상황을 직접적으로 되돌리려는 의도로 구체적인 보상을 제공하는 방안으로, 장점노력은 제품실패를 초래하는 이유가 특정한 장점을 추구하는 과정에서 불가피하게 발생할 수 있는 문제임을 언급하는 것과 같이 추가적인 상대적 장점을 설명하는 방식으로, 그리고 단점노력은 자사제품이 서비스실패를 초래할 수 있는 문제점을 지니고 있는 반면에 경쟁제품은 또 다른 측면의 단점을 지니고 있다는 점을 부각시켜 소비자의 자사제품에 대한 부정적 태도를 회복시키려고 방안이라고 개념화되었다. 그러한 회복노력들이 실질적으로 효과가 있다고 결론을 내리기 위해서, 회복노력이 제공되지 않는 상황과 비교하여 소비자의 태도나 의향이 우호적인지 검토된다. 가설검증을 위해 화장품산업에서 소비자들을 대상으로 가상적인 시나리오를 이용한 실험을 실시하였다. 연구 결과, 전반적으로 회복노력들은 효과적인 전략임이 확인되었고, 보상노력은 장점노력이나 단점 노력보다 효과적이었다. 특히 심각성이 높은 실패조건에서 단점노력은 장점노력보다 긍정적인 제품태도를 유도하였다. 심각성이 낮은 실패조건에서 장점노력과 장점노력의 효과는 기대할 수 없었다.

• 대한기계학회논문집B
• /
• 제40권2호
• /
• pp.69-73
• /
• 2016

최근 자동차 엔지니어들은 자동차 엔진의 열효율을 향상시키기 위한 수단으로 폐열 회수 기술에 많은 관심을 기울이고 있다. 배기량이 큰 가솔린 엔진은 대체로 V형인데, 열 회수를 위해 두 개의 슈퍼히터를 각각의 배기 다기관 가까이에 설치하는 것은 비용 면에서 효율적이지 않다. 하나의 슈퍼히터를 한쪽 배기 다기관에 최대한 가깝게 부착하면 좀 더 높은 열교환 효율을 얻을 수 있으나 폐열회수를 위한 배기가스의 유량은 절반이 된다. 반면에, 배기가스의 유량을 전부 이용하기 위하여 두 배기관이 합류된 지점에 슈퍼히터를 설치하면 배기가스의 온도는 많이 감소된다. 이 사실을 바탕으로 슈퍼히터의 최적 위치를 조사하기 위하여 상용프로그램인 AMESim을 이용해 해석을 수행하였다. 이 때, 배기가스 유량 중 절반만을 사용하더라도 슈퍼히터를 배기 다기관과 최대한 가까이 부착하는 것이 엔진의 배기가스로부터 3.8 kW의 열을 더 회수할 수 있는 것으로 나타났다. 이 결과를 바탕으로 최적의 폐열 회수 모델을 도출하고 제안하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 춘계종합학술대회 A
• /
• pp.620-623
• /
• 2008

홈 네트워크 제어 서비스 환경에서는 외부요인에 의한 장애, 네트워크 장애, 장치의 장애 등에 의해 장애가 발생할 수 있다. 더욱이 사용자는 시스템 결함 관리와 같은 복잡한 시스템 관리를 직접하는 것을 원하지 않는다. 따라서 홈 네트워크를 구성하는 홈 기기에 대해 장애가 발생할 경우 자동으로 복구하는 시스템을 필요로 한다. 이를 위해 본 논문에서는 홈 네트워크 제어 시스템 상의 홈 기기들의 제어 로그의 설계와 관리, 장애 발생시점의 홈 기기의 서비스 내용을 분석하여 홈 기기의 서비스 연속성을 보장하기 위한 방법을 제시하고 구현한다.

• 한국토양비료학회지
• /
• 제45권2호
• /
• pp.156-161
• /
• 2012

Marine biomass is considered an important substrate for anaerobic digestion to recovery energy i.e. methane. Nevertheless, marine biomass has attracted little attention by researchers compared to terrestrial feedstock for anaerobic digestion. In this study, biochemical methane potential (BMP) test was used to evaluate generation of renewable energy from starfish. A cumulative biogas yield of $748{\pm}67mL\;g^{-1}VS^{-1}$ was obtained after 60 days of digestion. The cumulative methane yield of $486{\pm}28mL\;CH_4\;g^{-1}VS^{-1}$ was obtained after 60 days of digestion. The methane content of the biogas was approximately 70%. The calculated data applying the modified Gompertz equation for the cumulative $CH_4$ production showed good correlation with the experimental result obtained from this batch study. Since the result obtained from this study is comparable to results with other substrates, marine biomass can be co-digested with food waste or swine wastewater to produce $CH_4$ gas that will help to reduce the gap in global energy demand.

• 한국물환경학회지
• /
• 제34권1호
• /
• pp.96-108
• /
• 2018

Large efforts have recently been made on research and development of sustainable and energy-efficient short-cut nitrogen removal processes owing to strong attention to the energy neutral/positive wastewater treatment system. Anaerobic ammonium oxidizing bacteria (anammox bacteria) have been highlighted since 1990's due to their unique advantages including 60% less energy consumption, nearly 100% reduction for carbon source requirement, and 80% less sludge production. Side-stream short-cut nitrogen removal using anammox bacteria and partial nitritation anammox (PN/A) has been well established, whereas substantial challenges remain to be addressed mainly due to undesired main-stream conditions for anammox bacteria. These include low temperature, low concentrations of ammonia, nitrite, free ammonia, free nitrous acid or a combination of those. In addition, an anammox side-stream nitrogen management is insufficient to reduce overall energy consumption for energy-neutral or energy positive water resource recovery facility (WRRF) and at the same time to comply with nitrogen discharge regulation. This implies the development of the successful main-stream anammox based technology will accelerate a conversion of current wastewater treatment plants to sustainable water and energy recovery facility. This study discusses the status of the research, key mechanisms & interactions of the protagonists in the main-stream PN/A, and control parameters and major challenges in process development.

• Journal of information and communication convergence engineering
• /
• 제9권5호
• /
• pp.615-618
• /
• 2011

Living cells generate the cell cycle or apoptosis, depending on the course will be repeated. If an error occurs during this period of life in order to maintain the cells in the peripheral cells find the error portion. These cellular functions were applied to the system to simulate the circuit. Circuit implementation of the present study was constructed the redundant structure in order to found the error quickly. Self-repairing of digital systems as an advanced form of fault-tolerance has been increasingly receiving attention according as digital systems have been more and more complex and speed-up especially for urgent systems or those working on extreme environments such as deep sea and outer space. Simulating the process of cell differentiation algorithm was confirmed by the FPGA on the counter circuit. If an error occurs on the circuit where the error was quickly locate and repair. In this paper, we propose a novel self-repair architecture for fast and robust fault-recovery that can easily apply to real, complex digital systems. These Self-Repairing Algorithms make it possible for the application digital systems to be alive even though in very noisy and extreme environments.

• IEIE Transactions on Smart Processing and Computing
• /
• 제3권1호
• /
• pp.10-18
• /
• 2014

From the perspective of reducing the sampling cost of color images at high resolution, block-based compressive sensing (CS) has attracted considerable attention as a promising alternative to conventional Nyquist/Shannon sampling. On the other hand, for storing/transmitting applications, CS requires a very efficient way of representing the measurement data in terms of data volume. This paper addresses this problem by developing a measurement-coding method with the proposed customized Huffman coding. In addition, by noting the difference in visual importance between the luma and chroma channels, this paper proposes measurement coding in YCbCr space rather than in conventional RGB color space for better rate allocation. Furthermore, as the proper use of the image property in pursuing smoothness improves the CS recovery, this paper proposes the integration of a low pass filter to the CS recovery of color images, which is the block-based ${\ell}_{20}$-norm minimization. The proposed coding scheme shows considerable gain compared to conventional measurement coding.

• 한국수소및신에너지학회논문집
• /
• 제29권2호
• /
• pp.148-154
• /
• 2018

This paper presents a comparative analysis of thermodynamic performance of ammonia-water Rankine cycles with and without regeneration and Kalina cycle for recovery of low-temperature heat source. Special attention is paid to the effect of system parameters such as ammonia mass fraction and turbine inlet pressure on the characteristics of the system. Results show that maximum net power can be obtained in the regenerative Rankine cycle for high turbine inlet pressures. However, Kalina cycle shows better net power and thermal efficiency for low turbine inlet pressures, and the optimum ammonia mass fractions of Kalina cycle are lower than Rankine cycles.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2004년도 추계학술대회 및 정기총회
• /
• pp.565-565
• /
• 2004

Due to limitation of resources and increasing concerns about environment, reverse logistics has received growing attention in recent years. In this paper, we propose three types of reverse logistics networks based on reuse of returnable containers, materials recycling process and remanufacturing for parts reuse. First, the sender in the re-usable item network supplies containers for the recipient and orders either new containers from external supplier or returnable containers cleaned from the container depot. Second, the recycling center in the proposed recycling network collects either end of life products from customer or faulty goods from manufacturer, collected products are dismantled into materials and materials go into recycling process. Finally, the manufacturer in the proposed remanufacturing network has two alternatives for supplying parts: either ordering the required parts to external supplier or overhauling disassembled parts and bringing them back 'as new' conditions. In this product recovery environment, we build optimal order quantity models to minimize the total logistics costs related to reverse logistics network. The validity of the proposed model is investigated through comprehensive computational experiments.