• 한국정보시스템학회지:정보시스템연구
• /
• 제30권4호
• /
• pp.43-69
• /
• 2021

Purpose Although companies occupied the network market take the advantageous position first and can be successful in securing users over a certain size, it is important to satisfy the customers' demand and prevent the outflow of users toward a new alternative SNS. What is more, there are frequent changes in the flow of users toward new SNSs. Despite these dynamic market circumstances, there is a lack of research to explain the switching behaviors of SNS users. Design/methodology/approach The objective of this study is to explain and verify a specified migration theory(Push-Pull-Mooring model) focused on SNS fatigue in the psychological point of view, as well as reviewing previous studies on functional and technical characteristics of SNSs themselves. Moreover, this study tried to highlight factors affecting users actual SNS switch rather than their switching intention. Findings According to the statistical analysis, the most influenced pull factor to switch SNS was the alternative attractiveness. On the other hand, undesired relationship burden, service innovation and important mooring factors to prevent users' SNS switch. This study has a significant contribution to the theory, which analyzed users' actual SNS switch, and examined SNS users' psychological factors(SNS fatigue), reviewing the characteristics of existing services. To secure more users and to keep them, companies providing social network service need to develop differentiated strategies by analyzing psychological characteristics of various users.

• 반도체디스플레이기술학회지
• /
• 제21권2호
• /
• pp.19-24
• /
• 2022

The purpose of this research is to determine the hardness of guide hole. A guide pin and a guide hole of SSD(Solid State Drive) tester used to mount SSD in a fixed position accurately. The guide pin and guide hole are worn by friction due to repeated operation, and the wear is concentrated on the guide hole made of weak material rather than the guide pin made of relatively strong material. Because of that reason, it is often overdesigned in the design stage because it can lose its function. If the guide hole is made soft, the manufacturing cost will decrease, but the accuracy will decrease due to wear caused by repeated friction. If the guide hole is manufactured excessively, the manufacturing process becomes complicated and the manufacturing cost increases. It is essential to design a guide hole, but since there is no standard or verified data that can be referenced, it is difficult to design. Experimental device which guides in the same way as the SSD tester is used for this research, and three types of anodizing state are experimented for different hardness. Also, weight of COK(Change over Kit) were analyzed by measuring the wear amount and state of the guide hole according to the number of repeated attachment and detachment.

• 한국정보기술학회 영문논문지
• /
• 제10권2호
• /
• pp.153-166
• /
• 2020

DDI(Display Driver IC) are used to drive numerous pixels that make up display. For stable driving of DDI, it is necessary to attach a protective film to shield electromagnetic waves. When the protective film is attached, defects often occur if the film is inclined or the center point is not aligned. In order to minimize such defects, an algorithm for correcting the center point and the inclined angle using camera image information is required. This technology detects the corner coordinates of the protective film by image processing in order to correct the positional defects where the protective film is attached. Corner point coordinates are detected using an algorithm, and center point position finds and correction values are calculated using the detected coordinates. LUT (Lookup Table) is used to quickly find out whether the angle is inclined or not. These algorithms were described by Verilog HDL. The method using the existing software requires a memory to store the entire image after processing one image. Since the method proposed in this paper is a method of scanning by adding a line buffer in one scan, it is possible to scan even if only a part of the image is saved after processing one image. Compared to those written in software language, the execution time is shortened, the speed is very fast, and the error is relatively small.

• 대한관절경학회지
• /
• 제13권1호
• /
• pp.82-85
• /
• 2009

목적: 전방 십자 인대 재건술시 잔류조직 보존은 이식건 치유를 향상시키고 고유수용 감각 기능을 보존할 수 있어 저자들은 10시 혹은 2시 방향 경경골 대퇴 터널을 천공하고 잔류조직을 보존하는 술기를 소개하고자 한다. 수술 술기: 잔류조직은 가능한 많이 보존하고자 하였으며 그 중에서 경골 부착부위 전방부와 후방 십자 인대와 연결된 활액막 및 잔류조직은 반드시 보존하여 잔류조직의 장력을 어느정도 유지하고 흘러내림을 방지하여 과간 절흔의 충돌을 방지 하였다. 경골 drill guide의 각도를 40~45도로 하고 관절 내 guide tip을 고식적인 위치보다 1 mm씩 전방 및 내측으로 이동하였다. 경골에서 유도 강선의 시작점은 거위발 건의 근위부, 내측 측부 인대의 전방부로 하였다. 경골 터널은 먼저 이식건의 두께보다 1 mm 작은 확공기를 이용하여 만들되, 경골 관절면의 피질골에 닿으면 조심스럽게 진행하여 피질골을 뚫자마자 멈춤으로써 가능한 잔류조직에 손상이 가지 않도록 하였으며, 다시 이식물과 같은 크기의 확공기를 이용하여 경골 터널과 10시 혹은 2시 방향의 대퇴 터널을 완성하였다. 결론: 전방 십자 인대 재건술시 10시 혹은 2시 방향 경경골 대퇴 터널을 천공하고 잔류조직을 보존하는 술기를 소개하였다.

• 설비공학논문집
• /
• 제29권11호
• /
• pp.559-569
• /
• 2017

Various studies examining how to conserve building energy have been conducted recently. From such studies it has been determined that insulation performance of an aircap is viable and therefore aircaps are used as material for improving insulation performance of windows. However, the aircap for improving insulation performance of a window is attached on the front, causing infringement of the prospect right. Therefore, the purpose of this study is to develop an aircap module attached to the window through rolling, conducting performance verification throughfull-scale testbed and verifying its effectiveness. Findings of this study are as follow : 1) The module suggested in this study enables setting of an area wherein the aircap is attached through rolling so that the aircap rolls up using Velcro tape, and an insulation bar is suggested to block the gap between the aircap and window glass. 2) When the aircap is applied to the window, consumption of lighting energy increased during summer and winter by 2.8%~16.4% and 0%~76.2% respectively in comparison to no aircap application, indicating that it is unsuitable for conserving lighting energy. 3) In terms of conserving cooling and heating energy, an advantageous or effective aircap attachment method is the method whereby an aircap is attached to the front surface of a window. However, the method whereby an aircap is attached to a part of a window and where no aircap is attached increases consumption of cooling and heating energy during summer and winter by 6.0%~35.7% and 2.7%~41.6% respectively in comparison to the method wherein an aircap is attached to the front surface of a window. 4) In consideration of conserving cooling, heating and lighting energy, the attachment of an aircap to the front surface of window is the most appropriate method, and it is appropriate to attach the aircap at a position that is 1,500 mm or higher from the floor to secure the prospect right and minimize energy loss.

• Journal of Periodontal and Implant Science
• /
• 제49권6호
• /
• pp.355-365
• /
• 2019

Purpose: The modified minimally invasive surgical technique (M-MIST) has been successfully employed to achieve periodontal regeneration. Platelet-rich fibrin (PRF) is known to enhance wound healing through the release of growth factors. This study aimed to observe the outcomes of periodontal surgery when M-MIST was used with or without PRF for the treatment of isolated intrabony defects. Methods: This randomized clinical trial was conducted on 36 systemically healthy patients, who had chronic periodontitis associated with a single-site buccal probing pocket depth (PPD) and clinical attachment level of ≥5 mm. Patients were randomly divided into 2 groups: the test group treated with M-MIST and PRF, and the control group treated with M-MIST alone. The primary periodontal parameters analyzed were PPD, relative attachment level (RAL), and relative gingival margin level. The radiographic parameters analyzed were change in alveolar crest position (C-ACP), linear bone growth (LBG), and percentage bone fill (%BF). Patients were followed up to 6 months post-surgery. Results: Intragroup comparisons at 3 and 6 months showed consistently significant improvements in PPD and RAL in both the groups. In intergroup comparisons, the improvement in PPD reduction, gain in RAL, and the level of the gingival margin was similar in both groups at 3 and 6 months of follow-up. Furthermore, an intergroup comparison of radiographic parameters also demonstrated similar improvements in C-ACP, LBG, and %BF at 6 months of follow-up. Conclusions: M-MIST with or without PRF yielded comparable periodontal tissue healing in terms of improvements in periodontal and radiographic parameters. Further investigation is required to confirm the beneficial effects of PRF with M-MIST.

• 복식문화연구
• /
• 제28권4호
• /
• pp.429-445
• /
• 2020

The purpose of this study is to provide ideas for the development of bag design by analyzing the expression types and aesthetic formativeness of modern bag design using tassels and fringe given the newtro trend pursuing analog sensitivity in modern society. The methods and scope of this study are as follows. First, the related literature and internet data were reviewed in order to examine the expression types and characteristics of the bags of the West and East. Next, the definition and characteristics of tassel and fringe decoration in terms of the history of clothing were analyzed. Finally, the expression types and aesthetic formativeness of tassels and fringe were derived through the analysis of modern bag design shown in the fashion collections since 2010. The bags decorated with the tassels and fringe bring a variety of visual effects depending on the attachment position, direction and material composition, concentrating the gaze and radiating original style. In this study, the expression of tassels and fringe in modern bag design was classified into three types: surface decoration, shape variability, and object combination. Next, the aesthetic formativeness of modern bag design using tassels and fringe as decorative elements appeared through the mixture of heterogeneous materials and playfulness through imagination, exaggeration through extension of length and volume, and retro characteristics through reinterpretation of tradition. This study is expected to contribute to creative ideas of modern bag design which requires a global sense, which has been used in various cultures for a long time.

• 한국의상디자인학회지
• /
• 제11권2호
• /
• pp.75-84
• /
• 2009

The following research analyzed the sewing teaching of the tailored jacket shown in fashion textbooks, which are currently used in universities and educational organizations in the fashion industry. To analyze the sewing teaching of tailored jackets, we analyzed 35 textbooks in the market. Among them we used 14 textbooks which dealt with the patter formation method of tailored jackets, and cutting and sewing methods. First, the stitching direction and the location of attachment varied. The type of sticking tape and its position also differed, emphasizing the need to make an institutionalized education material which is based on the characteristic of the fabric and its silhouette. Second, controlling the ease length of the right side sewing princess line, or information about the shoulder line and sleeve line of the notch as not specifically shown in the textbooks. Furthermore, not many textbooks showed how to pull the lower part of the texture out of sight, nor did they explain why this needed to be done. Third, the lining is usually slightly larger than the outer texture of the clothing, as the lining is usually tugged in the sewing process, and this method makes the clothes more comfortable. The method of sewing the princessline $0.2{\sim}0.3cm$ outside the outer pattern was the most recommended. The center-back side was usually 2cm in activity measurements, but it turned out that a textbook which required ease treatment on the shoulder line did not do so on the lining material. The textbooks used in this research dealt only with how to manufacture a tailored jacket without full explanation about textures which could influence the manufacturing. The production method and process differed between different textbooks, showing the need to make a institutionalized education material. In a quickly-changing era where there is rapid change in the dressmaking procedure, we need to help students understand the process more easily through a formalized education process.

• Journal of Biosystems Engineering
• /
• 제5권2호
• /
• pp.26-39
• /
• 1980

A study was investigated to find out the mechanical optimum conditions of power tiller-plow system on both paddy field and upland. Mathematical model was developed for the theoretical analysis of this system and the experimentation on the field was carried out with two different sizes of 5PS and 8PS power tiller equipped with rubber tire. 1) The relationship between the plowing depth and draft resistance of the power tiller-plow system was a quadratic function. 2) The minimum point of the specific draft resistance of the 5 PS plow was found at the smaller plowing depth than that of 8 PS plow, therefore we can find that the curved surface of 5PS plow bottom should be improved for the effective plowing operation. 3) As the improvement of the mechanical balance by the desirable change of the curved surface of plow bottom, the relative position of hitch point and dimension of plow beam would be realized, the 5 PS power tiller could be used to plow deeply (about 16-17cm). 4) The virtual acting point of the total draft resistance on the plow bottom approached to the land side as the plowing depth increased. 5) The resultant of vertical reaction force $R_2$ on the landside was increased with the plowing depth, while the vertical reaction force $R_1$ on the wheel was decreased as the slope angle of the body of power tiller increased. 6) For the effective plowing operations ; a) The slope angle of the body should be as small as possible. b) The diameter of the wheel should be as small possible. c) The horizontal and vertical distances $l_2, h_1$ between the wheel axis and plow bottom should be as large as possible. 7) To use the 5PS power tiller as the major unit of agricultural machinery, the curved surface of the 5 PS plower bottom and the mechanism of attachment between the power tiller and the plow should be changed as the indications of this study, and in addition to these, the new operation method of the field work should be developed.

• 한국콘텐츠학회논문지
• /
• 제13권10호
• /
• pp.71-81
• /
• 2013

의식적 통제가 가능한 언어는 감정을 숨길 수 있으나, 얼굴 표정은 다양한 문화 속에서도 일관성을 가진다. 표정은 사람의 이미지를 결정하며, 표정에서 감정을 해석하는 능력은 대인관계의 핵심으로 사람의 태도와 결정을 바꿀 만큼 중요하다. 불안정 애착아동, 노인, 자폐증, ADHD 아동, 우울증집단은 얼굴 표정인식 능력과제의 수행결과가 낮아, 이들에 대한 적극적인 개입은 심리장애의 예방과 치료 효과의 가능성을 기대하기도 한다. 지금까지 연구는 주로 상대방 표정에 의한 정서읽기, 수용자의 감정변화가 중심이었으며, 자신의 정서를 스스로 나타내는 "자기표현 표정수행" 및 표정 변화에 대한 정량적 분석 연구가 미흡하였다. 따라서 본 연구에서는 영상을 통한 표정의 정량적 분석법 개발을 목표로 8개의 정서 표정을 "자기표현 표정수행"방법으로 분석하였다. 연구의 정량적 결과는 심리장애 극복을 위한 교육, 심리 행동 치료, 감성공학, 글로벌화 되는 다문화(multi-culture)사회에서 문화극복을 위한 사회관계 대안, 한국문화와 예술 콘텐츠의 다양한 분야에 적용을 기대한다.