• Explosives and Blasting
• /
• v.39 no.4
• /
• pp.1-11
• /
• 2021

In this study, the vibration data were obtained to analyze the vibration generated during dismantling of slab using the mechanical dismantling method. The obtained vibration data were classified according to the attachment device and then the waveform and dominant frequency analysis were performed. And the correlation was analyzed by the different methods of measuring the distance between the work section and the measurement point. As a result of the waveform analysis for each attachment device, there was little change in the phase of the vibration waveform and only the change in amplitude, which is the magnitude of the vibration velocity. And as a result of frequency analysis, the frequency band was lower when using a crusher method than a braker method and frequency band were close of the natural frequency of the structure to be dismantled. As a result of the correlation analysis, the separation distance was estimated a higher correlation when evaluated as the path through which the vibration propagates along the structure frame than the straight distance between the measurement point and the working section.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.6
• /
• pp.635-639
• /
• 2008

Objectives : the effect of different sterilization methods on the surface morphology of PPDO-hybrid-PLGA nanofiber scaffold and attachments of PC12 cell were investigated. Methods : Poly (p-dioxone)-hybrid-Poly (lactide-glycolide) (PPDO-hybrid-PLGA) nanofiber scaffold, fabricated in a tube form with 1.5 mm internal diameter, 0.2 mm thickness and 5 mm length, was prepared using electrospinning method. To study the surface morphology using SEM, The study group and control group in respective were; Control:Non-sterilized scaffold, Group I:scaffold sterilized with 70% Alcohol, Group II: scaffold sterilized with Ethylene Oxide at $65^{\circ}C$, and Group III: scaffold sterilized with Ethylene Oxide at $37^{\circ}C$. To investigate viability of the PC12 cell on the scaffold, The study group and control group in respective were; Control: sterilized with 70% Alcohol, Group I: sterilized with Ethylene Oxide at $65^{\circ}C$, and Group II: sterilized with Ethylene Oxide at $37^{\circ}C$. Results : 1. The surface morphology was slightly changed in Group I, II and Group III, compared with control. 2. The attachment of PC12 cells in Group I, II was not higher than in control Discussion : The attachment of PC12 cell is not influenced by different sterilization methods.

• Journal of the Korea Society for Simulation
• /
• v.26 no.4
• /
• pp.1-9
• /
• 2017

The Genetic Algorithm(GA) is a global search algorithm based on biological genetics. It is widely used in various fields such as industrial applications, artificial neural networks, web applications and defense industry. However, conventional Genetic Algorithm has difficulty maintaining feasibility in complicated situations due to its fixed number of chromosomes. This study proposes the Genetic Algorithm using variable chromosome with chromosome attachment. And in order to verify the implication of changing number of chromosomes in the simulation, it applies the Genetic Algorithm using variable chromosome with chromosome attachment to antisubmarine High Value Unit(HVU) escort mission simulation. As a result, the Genetic Algorithm using variable chromosome has produced complex strategies faster than the conventional method, indicating the increase of the number of chromosome during the process.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.3
• /
• pp.328-337
• /
• 2015

Objectives: The purpose of this study is to investigate differences in concentration according to the position at the left or right shoulder within a 30 cm of radius of workers' respirators and provide basic data for the establishment of an industrial health policy. Methods: Personal samples were collected from a total of 65 workers from 27 manufacturing firms in South Gyeongsang-do Province from November 5, 2011 to December 30, 2012 after classifying the laborers into left- and right-side groups. The organic compound samples were collected and analyzed in accordance with the NIOSH Manual of Analytical Methods (NMAM) 1501. Results: In terms of the concentration of organic compounds collected from both left and right shoulders at the position of workers' respirators, isobutyl acetate was the highest with 145 ppm at the left shoulder, followed by ethyl acetate (133.5 ppm) and toluene (38.13 ppm). At the right shoulder, on the contrary, ethyl acetate (149.3 ppm) was the highest, followed by toluene (46.26 ppm), xylene (29.63ppm) and isopropyl alcohol (28.06 ppm). Overall, the right shoulder was higher than the left shoulder in terms of concentrations. Conclusions: For the measurement of the working environment, workers' personal samples should be collected at the place closest to the respirator. In terms of the reduction of error, the attachment of two sample media is expected to reduce errors in exposure assessment.

• Journal of Periodontal and Implant Science
• /
• v.32 no.2
• /
• pp.325-338
• /
• 2002

Bone graft using growth factors and guided tissue regeneration have been used for the regeneration of infrabony defects which caused by periodontal disease. Calcium sulfate which is one of the resorbable barrier materials used for guided tissue regeneration. Platelet rich plasma which is a easy method to obtain the growth factors had many common points but, platelet rich plasma was still studying. This study was the comparative study between bone graft using platelet rich plasma and guided tissue regeneration using calcium sulfate barrier material in clinical view. For the study, 28 sites(2 or 3 wall infrabony defects) were treated. 14 infrabony defects were received surgical implantation of BBP-calcium sulfate composite with a calcium sulfate barrier and the others received BBP mixed with platelet rich plasma. Clinical outcome was accessed 3 and 6 months of postsurgery. 1. There was no statistical difference between CS group and PRP group in pocket depth, gingival recession, clinical attachment level, and probing bone level at baseline. 2. There was statistically significant reduction in probing depth, clinical attachment level, and probing bone level at 3 and 6 months postsurgery(p<0.05). 3. In the probing depth and clincial attachment level PPR group had less improvement than CS group, but there was no statistically difference at 3 and 6 months postsurgery. 4. In the recession PPR group had less recession than CS group, but there was no statistically difference at 3 and 6 months postsurgery. 5. In the probing bone level PPR group had less improvement than CS group, but there was no statistically difference at 6 months postsurgery. In conclusion bone graft using platelet rich plasma and guided tissue regeneration using calcium sulfate barrier showed similar clinical improvement for the treatment of 2 or 3 wall infrabony defects.

• The Journal of Korean Academy of Prosthodontics
• /
• v.28 no.2
• /
• pp.217-229
• /
• 1990

The Applegate-Kennedy classification, the drawing of removable partial denture design using color coding, the selective tissue placement impression method in case of Class I and Class II removable partial dentures, the design of the swing lock attachment of an alternative approach to conventional removable partial denture, the design of the intracoronal or extracoronal attachment, and the removable partial denture design using a rotational path were presented. The following conclusions from the above things were presented : 1. The swing lock attachment removable partial denture can be effective to an alternative approach when the design of conventional removable partial denture is improper with markedly mobile remaining teeth or missing key abutments. 2. Intracoronal or extracoronal attachments must be selected care-fully considering the conditions of the abutment teeth and alveolar ridge whether more occlusal loads to the abutment teeth or to the alveolar ridge are distributed. 3. It must be almost prerequisite that a functional impression is taken in case of Class I and class II removable partial dentures and in case of tooth-borne removable partial dentures, a removable partial denture using rotational path is strong, hygienic, esthetic, and can be accomplished successfully in the clinical aspect when it is properly designed and fabricated through the complete understanding of an indication and a principle. 4. All necessary informations must be achieved with carefully investigated surveying procedure according to each clinical case by Applegate-Kennedy classification which can be helpful and useful in the clinical application and it is important that dentists themselves must be in the habit of drawing a reasonable partial denture design using a color coding in the paper sheet.

• Korean Security Journal
• /
• no.43
• /
• pp.99-120
• /
• 2015

This research aimed at analyzing health behavior of private security guards applying planned behavioral theory. In order to achieve the above purpose, this research conducted purposive sampling on the security guards who live in Seoul Gyeonggi region. Excluding unfaithful response and abnormal outlier, material of 187 persons was used for analysis. As the concrete analysis method, multiple regression analysis and logistic regression analysis to presume exploratory factory analysis(EFA), Polyserial Exploratory Factor Analysis(EFA), Polyserial correlation analysis, and causal relationship between each variable. The result can be summarized as follows. First, attachment, attitude subjective standard on behavior, perceived behavioral control appeared to positively influence affirmative(+) effect on health behavior continuance will. Second, attachment had no meaningful influence attitude toward behavior. Third, attachment had affirmative(+) influence on health behavior continuance will. Fourth, perceived behavioral control had affirmative(+) influence on realization of health behavior, possibility of practising health behavior increased by about 62.9% when perceived behavioral control increased by 1 unit.

• Journal of Periodontal and Implant Science
• /
• v.41 no.2
• /
• pp.73-78
• /
• 2011

Purpose: For periodontal tissue engineering, it is a primary requisite and a challenge to select the optimum types of cells, properties of scaffold, and growth factor combination to reconstruct a specific tissue in its natural form and with the appropriate function. Owing to fundamental disadvantages associated with using a two-dimensional substrate, several methods of seeding cells into three-dimensional scaffolds have been reported and the authors have asserted its usefulness and effectiveness. In this study, we explore the cell attachment of periodontal ligament fibroblasts on nanohydroxyapatite (n-HA) scaffold using avidin biotin binding system (ABBS). Methods: Human periodontal ligament fibroblasts were isolated from the health tooth extracted for the purpose of orthodontic procedure. HA nanoparticles were prepared and $Ca(NO_3)_2-_4H_2O$ and $(OC_2H_5)_3P$ were selected as precursors of HA sol. The final scaffold was 8 mm in diameter and 3 mm in height disk with porosity value of 81.55%. $1{\times}10^5$ periodontal ligament fibroblasts were applied to each scaffold. The cells were seeded into scaffolds by static, agitating and ABBS seeding method. Results: The number of periodontal ligament fibroblasts attached was greater for ABBS seeding method than for static or agitating method (P<0.05). No meaningful difference has been observed among seeding methods with scanning electron microscopy images. However, increased strength of cell attachment of ABBS could be deduced from the high affinity between avidin and biotin ($Kd=10^{-15}\;M$). Conclusions: The high-affinity ABBS enhances the ability of periodontal ligament fibroblasts to attach to three-dimensionally constructed n-HA scaffold.

• The Korean Journal of Pesticide Science
• /
• v.9 no.3
• /
• pp.268-273
• /
• 2005

The cultivating agroproducts are damaged by the Meloidogyne spp. which are gradually increasing in farm land soil. No effective control method for Meloidogyne spp., however, is available. Pasteuria penetrans which is one of the microorganisms in soil is used for biological control of Meloidogyne spp. although the method of mass production is limited. This study was conducted to investigate attachment and mass production effect of P. penetrans to M. arenaria under different temperatures (10, 30, 50 and $70^{\circ}C$) and pH values (4, 7 and 10). Attachment rates under these temperature and pH were more than 96% and 80%, respectively. In mass production rates, the number of P. penetrans attached on M. arenaria under different temperatures and pH were highly increased in root of tomato but not significantly different. Therefore, we concluded that P. penetrans can survive and attach on M. arenaria under various conditions. This method for mass production of P. penetrans can be provided to develop environmentally-friendly nematicide.

• Journal of Environmental Health Sciences
• /
• v.22 no.1
• /
• pp.82-90
• /
• 1996

The objectives of this study were to examine the start-up method and characteristics of biomass attachment on the media in an anaerobic fluidized bed reactor(AFBR). The media adopted was the granular activated carbon which was successfully capable of adsorbing organics and biomass. The reactor was operated at 5 kg $COD/m^3\cdot day$ and 24hr of HRT. There were important problems in the AFBR's start-up, which has been reported very long and unstable. Therefore, this research was to solve the problem of the start-up and it was performed, comparing two start-up ways that were initial fluidized system and initial static-fluidized system. The results were summarized as follows: (1) On the whole initial static-fluidized system was superior to initial fluidized system in the aspects of biogas production rate, methane content and COD removal efficiency etc. (2) At the steady state methane production rate and recoverable bioenergy of initial static-fluidized system were $2.074 m^3CH_4/m^3\cdot day$, $0.488 m^3CH_4/kgCOD_{removed}\cdot day$, and 81.3kcal/day, respectively. (3) Thickness of biofilm was about $5.11 \mu m$, $\rho_{bw}$ and $\rho_{bd}$ were $1.022 g/cm^3, 0.0953g/cm^3$ respectively. (4) Biomass concentration of fluidized state was about 35 mg/g GAC. In conclusion the efficient method on the start-up of the AFBR using GAC as media was initial static-fluidized system and the period of static state needed to reach steady state was considered about twenty days.