• 대한의용생체공학회:의공학회지
• /
• 제11권1호
• /
• pp.131-140
• /
• 1990

To improve antithrombogenicity of polymer that used in vascular graft and artificial organs, seeding of human endothelial cells on the polyurethane was studied. Human endothelial cells were ismlated from human umbilical veins, using type I collagenase, and identified with goat anti vWF antibodies. Human endothilial cell seeding was tried upon the polyurethane which has good mechanical property and resists stresses. The hydrophobic polyurethane surface was changed hydrophilic by corona discharf:e treatment. Surface hydrophilicity was measured with Wilhemly plate method and the goniometer. To evaluate matrix protein adsorption, fibronectin adsorption test was done. To eveluate cell adhesion, human endothelial cell attachment forces were measured rising a perfusion chamber of , ism diamter. Less cells were detached from the hydrophilically treated polyurethane. This showed that corona discharge on the polyurethane could improve matrix adsorption and endothelial cell attachment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.548-553
• /
• 2002

Most tasks of the large vertical or ceiling structures have been carried out by human power. Those tasks require us much operation costs and times, safety devices, etc. So the need of automation for those tasks have been rising. That automation needs a wall-climbing mobile vehicle. Most former researches are things about attachment devices and moving mechanisms. A wall-climbing mobile vehicle must be designed by a method different from the case of the vehicle of the horizontal environment. That is because gravity acts as a negative role on the stability of a wall-climbing vehicle. In this thesis, the particular shape characteristics of a wall-climbing mobile vehicle are derived by the wall-environment modeling. In addition, some design constraints of the permanent magnetic wheel as an attachment device was studied. According to those requirements and constraints, one specific wall-climbing mobile vehicle was designed and some experiments were made on the attachment ability of that vehicle.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.109-110
• /
• 2016

The recent introduction of Metal spraying method apply to construction and civil steel structure is increasing. In applying the metal spraying lining process of construction and civil steel structure to secure the adhesion strength between the metal thermal spray coating and the steel structure and the highest priority requirements are required bond strength test reliable measurement accordingly. In this study, by calculating the deposition intensity and the standard deviation, coefficient of variation corresponding to the bonding area, unlike the shape of the attachment we compared the results.

• 대한가정학회지
• /
• 제33권3호
• /
• pp.165-177
• /
• 1995

The home environments, daily activities, caregiving behaviors of mothers, infant's verbal behaviors, attachment to mothers of home-reared infants from low SES families were observed. 30 two-year-old home-reared infants and their mothers were observed at home by the time sampling method. The HOME scale, the behavioral checking lists for caregiving behaviors and for the infants' verbal behaviors, and the Attachment Q-set were used for the observation. the total HOME scores were in the middle range and the scores of "Provision of apropriate play materials" was relatively high, but "Avoidance of restriction and physical punishment" was low. The most frequent caregiving behaviors shown by mothers were " Facilitating verbal development" and "Positive social-emotional inputs". The most frequent verbal behaviors shown by infants were " Information exchange" and " Language interpretation" . The infants' attachment security scores of their mothers tended to be low.

• 한국산업융합학회 논문집
• /
• 제22권6호
• /
• pp.807-819
• /
• 2019

In this paper, it is proposed a new approach to motion control and kinematics analysis of articulated manipulator attachment with five degree of freedom for excavator. Unlike the well-established theory for the control of linear systems, there is little general control theory relatively for a robust control of nonlinear systems. The control technique is essential for providing a stable and robust performance for application of articulated manipulator control. The proposed control algorithm is one of robust control methods based on error informations of the position and velocity error informations using stability analysis of dynamic model. Through simulation test, the proposed control scheme is illustrated to be a efficient control technique for real-time control.

• 구강생물연구
• /
• 제42권4호
• /
• pp.248-253
• /
• 2018

Cemental tears are uncommon form of root fracture that can lead to rapid localized periodontal attachment loss. Studies have described periodontal breakdown as being associated with the separation of the cementum from the underlying tooth structure. The aim of this case report is to assess the outcome of treatment of cemental tear with several surgical treatment regimens. Three patients with cemental tear were treated with different surgical method. In all three cases, the cemental tear occurred on maxillary right central incisors. In each case, the root fragment were removed, the localized defect was treated using different surgical methods including guided tissue regeneration and bone graft followed by scaling and root planting. In all three cases, symptoms subsided after the treatment and clinical attachment level was improved up to 2 mm at 3 month after surgery. Both conventional and regenerative periodontal surgery could achieve successful outcomes.

• International Journal of Advanced Culture Technology
• /
• 제10권4호
• /
• pp.190-197
• /
• 2022

The purpose of this study is to investigate the effect of consumer's authenticity perception on brand repurchase intention and word-of-mouth intention through customer satisfaction and brand attachment. For this purpose, a structural equation model was established based on previous studies and an empirical study was conducted. The survey was conducted offline and online, and samples were collected using a convenient sampling method. A total of 267 questionnaires were sampled, and 255 questionnaires were used as final valid samples, except for 12 questionnaires with errors. For the final data, SPSS Win ver. 23.0 and AMOS 20.0 statistical programs were used to analyze the personal characteristics of the subjects, verify the research model, and confirm the reliability and validity of the measurement model and the suitability of the research model.As a result, all six hypotheses were adopted, and the correlation between each factor was observed in the research model.

• Industrial Engineering and Management Systems
• /
• 제8권1호
• /
• pp.66-71
• /
• 2009

This study proposes a new framework for designing disassembly methods. In recent years, environmental problems have become global issues. Recycling of used products or resources is recognized as a matter of significance since it may help reduce the risk of exhausting natural resources. Considering possible exhaustion of limited natural resources in the near future, reuse of products would gain more environmental significance. As yet, it relies hugely on manual disassembly, which labor cost places burden on the total recycling cost. The purpose of this study is to propose a methodology designing for manual disassembly works, and a creation method of a jig. By focusing on parts' connection and attachment relationship, parts are categorized in 5 categories (parent part, joint key part, attaching key part, child part, and independent part) according to the features that parts possess, and 3 kinds of connection relationships (parent part-joint key part connection, parent part-independent part connection and child part-child part connection) are clarified. Connection relationship and attachment relationship charts have also been created, and utilizing them, disassembly orders are settled, and a disassembly jig is devised. The proposed methodology is also applied to a real product and its work time is improved 42% form 31 to 13 seconds.

• 제어로봇시스템학회논문지
• /
• 제11권2호
• /
• pp.160-166
• /
• 2005

In this paper, to overcome drawbacks of FLC a self tuning fuzzy sliding mode controller is proposed, which controls the position of excavator's attachment, which can be regarded as an ill-defined system. It is reported that fuzzy logic theory is especially useful in the control of ill-defined system. It is important in the design of a FLC to derive control rules in which the system's dynamic characteristics are taken into account. Control rules are usually established using trial and error methods. However, in the case where the dynamic characteristics vary with operating conditions, as in the operation of excavator attachment, it is difficult to find out control rules in which all the working condition parameters are considered. Experiments are carried out on a test bed which is built around a commercial Hyundai HX-60W hydraulic excavator. The experimental results show that both alleviation of chattering and performance are achieved. Fuzzy rules are easily obtained by using the proposed method and good performance in the following the desired trajectory is achieved. In summary, the proposed controller is very effective control method for the position control of the excavator's attachment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.937-941
• /
• 1997

Utomatic finishing process requires the development of high efficient and precision abrasive machining method for die and molds. This study describes the evaluation of the finishing characteristics, such as sufrace roughness, topography and material removal depth, of the electrolytic chemical mixed abrasive machining method. Experimental setup is composed of 3 axis machining center, a newly developed finishing attachment with constant pressure, electrode and electrolytic bath. Finally, we achieved a successful result that surface roughness is 0.01 .mu. m Ra and material removal depth is 145 .mu. m after 100 times repeat-finishing using electrolytic (0.8A,30V) mixed abrasive (#400 CBN, #320 Sic) machining method.