• Title/Summary/Keyword: Attached type

Search Result 1,069, Processing Time 0.025 seconds

A Study on the Vibration Damping of Multilayer Damping Sheet (다층 제진판의 제진성 연구)

  • Kim, Won-Ho;An, Byeong-Hyeon;Ahn,
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.32 no.4
    • /
    • pp.457-464
    • /
    • 1996
  • The vibration damping of various multilayer damping sheet with different constraining layer and viscoelastic layer were investigated by Rheovibron and vibration test. Damping increased as dynamic loss tangent increased. Constrained type damping sheet showed better damping than extensional type damping sheet. Aluminum foil attached asphalt impregnated paper pad showed best damping.

  • PDF

QUANTUM GRAPH OF SIERPINSKI GASKET TYPE IN ELECTRIC FIELD

  • Blinova, Irina V.;Popov, Igor Y.
    • Communications of the Korean Mathematical Society
    • /
    • v.31 no.2
    • /
    • pp.263-275
    • /
    • 2016
  • Quantum graph of Sierpinski gasket type with attached leads in an electric eld is considered. We study the dependence of the transmission coecient via the wave number of the quantum particle. It has strongly resonance character. The in uence of the amplitude and the orientation of the electric eld on the coecient is investigated.

Power Generation Characteristics of Uni-morph Piezoelectric Cantilever with Different Vibration Angle (진동 각도에 따른 유니몰프 압전 캔틸레버의 발전특성연구)

  • Kim, Chang Il;Yun, Ji Sun;Park, Woon-Ik;Jeong, Young-Hun;Hong, Youn Woo;Cho, Jeong-Ho;Paik, Jong Hoo
    • Journal of Sensor Science and Technology
    • /
    • v.26 no.2
    • /
    • pp.107-113
    • /
    • 2017
  • Energy source of a piezo-electric harvester is vibration. Sources of vibration are machineries operated with high frequencies, constructions and people operated with low frequencies and etc. In this study, we tried to figure out power generation properties over vibrations upon angles of a piezo-cantilever for applying them to movements of the construction and/or people, which are vibration sources at low frequencies. A uni-morph cantilever with a $59mm{\times}29mm{\times}0.2mm$ piezo-electric element attached on a $71mm{\times}46mm{\times}0.25mm$ copperplate was used. A spring was attached to the lower side of the cantilever and a mass was attached on the opposite side. Also, a structure with a specific angle which is an angle in between the ground and the cantilever was prepared and then, connected to a spring or the cantilever. Then, this structure was divided into the A-type and B-type and excited in the direction of z- axis. After that, the angle between the ground and the cantilever was changed and excited by 1 to 10 Hz upon the existence of a spring and/or a mass to compare power generation properties.

Miniaturization of Microstrip Antenna using Iris (Iris를 이용한 마이크로스트립 안테나의 소형화)

  • Seo Jeong-Sik;Woo Jong-Myung
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.15 no.10 s.89
    • /
    • pp.922-930
    • /
    • 2004
  • In this paper, the 3-dimensional microstrip antenna, where the lis is attached near the patch, on the pound and both patch and ground in zigzag, is designed and fabricated to miniaturize size of antenna. The path of surface current and permittivity in patch are increased because of attached Iris near the patch, on the pound and patch and found. In particula., the maximum size reduction effect among the three-type of $79.1\%$(17 mm$\times$90 mm) was presented in zigzag-type compared with the rectangular microstrip patch antenna(MPA) with a height of 9 mm at the resonant frequency of 1.575 GHz. The gain showed -1.15 dBd, -10 dB bandwidth showed 6.2$\%$(98 MHz), and HPBW of E-plane showed $154^{\circ}$. As that result we could confirm that the 3-dimensional structure with attached Irises is the proper form for the miniaturization of microstrip antenna.

Vibration Suppression of Beam Using Magnet and Coil (자석과 코일을 이용한 빔의 진동 억제)

  • Cheng, Tai-Hong;Jung, Jung-Hwan;Oh, Il-Kwon
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2007.11a
    • /
    • pp.727-730
    • /
    • 2007
  • Coil inductor has been used widely as an electromagnet, because of the high magnetic filed resulting from the voltage applied to the coil. In this study the coils were used in vibration suppression as an actuator. The control system consists of a coil attached in aluminum beam and a permanent magnet set at its bottom. This actuation method is easy to be incorporated into the system and allows significant forces to be applied without contacting with the structure. Three types of coils (cylindrical type, square type, Circular sheet type) were employed in vibration suppression of cantilever beam. The positive position feedback (PPF) controller was applied to the magnet-coil actuator to suppress the first mode of vibration. Experimental results showed that the cylindrical type and square type coil made good vibration suppression efficiency under PPF controller than their eddy current damper. However, there was minimal difference for the circular sheet type coil if compared with its eddy current damper.

  • PDF

Electro-hydraulic Characteristic Analysis of Arm-type Implement for Three-point Hitch (3점 히치 장착형 암식 작업기의 전자유압특성 분석)

  • Lee, Sang-Sik;Park, Won-Yeop
    • Journal of Biosystems Engineering
    • /
    • v.36 no.5
    • /
    • pp.314-318
    • /
    • 2011
  • Arm-type implements of tractor are mainly utilized for the slope land operation. The proposed hydraulic system was implemented to arm-type implements of tractor. An experiment was conducted to evaluate response characteristics of the designed arm-type implement control system attached by three-point hitch of tractor at various conditions, such as engine speed, pumping rate and cylinder input flow. Effects of the valve response time didn't affect engine speed. The flow rate of pump and cylinder changed to the pressure loss. Also, the pressure loss was within 2 MPa and the response characteristic was sufficient enough to use as the arm-type implement system.

Development of the Pin Type Load-cell Using Strain Gauge (Strain Gauge를 이용한 핀형 로드셀 개발)

  • Lee, Dong-Wook;Park, Min-Hyuk;Lee, Gye-Gaong;Kim, In-Hwan;Lee, Seok-Soon
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.13 no.4
    • /
    • pp.75-82
    • /
    • 2014
  • A pin-type load-cell which uses shear-type strain gauges was developed to measure the tension of a wire in a winch. A finite element analysis was performed to determine the locations of the strain gauges. All of the shear-type strain gauges were attached onto parts that undergo regularly shear stress distributions. A Wheatstone bridge circuit was used to connect each of the gauges and to measure the strains. Linearity within the 5% error range was noted when testing the pin-type load-cell.

Semantics of exceptives oyey and pakkey in Korean

  • Yeom, Jae-Il
    • Language and Information
    • /
    • v.19 no.2
    • /
    • pp.55-80
    • /
    • 2015
  • In this paper, I show how oyey 'except' and pakkey 'but' in Korean are semantically different from but/except in English. The exceptive oyey is attached only to a definite NP and shows no restriction on the NP that it is associated with. The referent of the NP is removed from either the restrictor, or nuclear scope, of the associated NP, also giving rise to two different inferences about the exception phrase. The inferences are based on the condition that an expression should make a non-trivial meaning contribution in a sentence. The complement of oyey is really taken to be an exception in one interpretation, but not in the other. The exceptive pakkey is assumed to be a NPI. It does not require a phrase that a pakkey-phrase is associated with. It can be attached to any type of phrases, including a NP. Attached to a full phrase, it is interpreted as a scalar item. Its core meaning contribution is to remove weaker alternatives from the scalar set locally. For a general interpretation, the other meanings are captured globally. A pakkey-phrase with a demonstrative has a conjunctive meaning, and it can be analyzed like oyey in one of the two interpretations.

  • PDF

Comparison of Walking in Elderly People and Adults Using a Walker Aid with a Pocket Attachment

  • Kwag, Sung-won;Shin, Eun-ji;Park, Jeong-uk;Roh, Hyo-lyun
    • Journal of the Korean Society of Physical Medicine
    • /
    • v.10 no.3
    • /
    • pp.73-79
    • /
    • 2015
  • PURPOSE: This study aims to examine the impact of the location of a walker-aid pocket that is attached to the walker while walking. METHODS: The research subjects included 10 male adults and 10 elderly people. The subjects used a two-wheeled walker for the walking analysis, and a firm velcro-type pocket that can be attached to the walker aid was used for weight loading. The size of the external loads was set at 2kg, which corresponds to approximately 2.5% of the mean body weight of the subjects. The pocket was attached to the left, center, and right sides of the walker aid. Stride length, stride, step width, and time were investigated according to the location change. RESULTS: No statistical differences were observed in all the walking factors among the adults and elderly people regardless of the changes in the location of the walker pocket. In cases of no weight and the 2kg walker pocket, stride length and strides were longer for the adults, while the step width was greater and walking time was longer for the elderly people. CONCLUSION: The weight of the walker pocket turn out to retard walking speed, although the location of the walker pocket is not affect walking with the walker-aid.