• 제목/요약/키워드: Attached growth

검색결과 357건 처리시간 0.02초

국화 '백마'의 플러그 육묘시 삽목조건이 삽목묘와 절화 생육에 미치는 영향 (Effects of Cutting Condition on Growth of Rooted Cuttings and Cut Flower in Plug Cutting of Dendranthema grandiflorum 'Baekma')

  • 유용권;노용승
    • 원예과학기술지
    • /
    • 제30권1호
    • /
    • pp.13-20
    • /
    • 2012
  • 본 연구는 스탠다드 국화 '백마' 품종의 플러그 묘 생산에 있어서 삽수의 조건이 지상부 생육과 발근 및 정식 후의 절화 생육에 미치는 영향을 알아보고자 실시하였다. 삽수에 잎을 많이 부착할수록 삽목묘의 지상부 생육이 양호하였고, 잎을 4-6장 부착하여 삽목하는 것이 다른 처리에 비해 발근에 효과적이었다. 삽수길이에 따른 삽목묘의 지상부 생육은 큰 차이가 없었으며, 삽수길이를 5-7cm로 처리하는 것이 발근상태가 양호하였다. 삽수 굵기는 3.1mm 처리에 비해 3.6mm와 4.2mm 처리에서 삽목묘의 지상부 생육과 발근이 양호하였다. NAA 처리농도가 높을수록 삽목묘의 지상부 생육이 억제되었으며, 뿌리의 길이도 짧아졌다. NAA $100mg{\cdot}L^{-1}$를 1시간 처리하여 삽목하는 것이 삽목묘의 지상부 생육과 발근에 효과적이었다. 피트모스와 펄라이트를 2:2로 혼합한 배지에서 다른 처리에 비해 뿌리의 길이, 수 및 무게 등이 뿌리의 생육이 양호하였다. 잎이 적은 것보다 4-6개 부착된 삽수의 삽목묘를 정식했을 때, 절화장이 길고, 무게가 무거웠으며, 엽수도 많았다. 삽수길이에 있어서 7-9cm 처리가 절화장, 절화무게, 설상화 수 등 전반적인 절화의 생육에 효과적이었다. 따라서 '백마' 플러그 묘 생산시 7cm 길이에 3.6mm 굵기의 4-6장의 잎을 부착한 삽수를 삽목하는 것이 삽목묘의 지상부 생육과 발근 및 정식 후의 절화 생육을 위해 바람직하였다.

중국산 참가리비, Patinopecten yessoensis의 인공종묘 생산 및 부착치패 중간양성에 관한 연구 (A Study on the Production of Artificial Seed and Intermediate culture for Attached Spats of the Chinese Stock of a Scallop, Patinopecten yessoensis)

  • 오봉세;이정용;박세규;이주;조규태
    • 한국패류학회지
    • /
    • 제24권2호
    • /
    • pp.153-159
    • /
    • 2008
  • 중국산 참가리비 어미패의 GSI 월 변화를 보면 2월 중순 17.2 이었고, 3월 중순에는 중국산은 20.2로 채란 가능한 상태였으나 국내산 참가리비의 GSI는 2월 6.9, 3월 10,8로 미숙상태를 보였다. 어미패를 음건 및 자외선 조사 해수를 이용하여 3월 10일 및 15일 2차례에 걸쳐 채란한 결과 총 22,800만개 수정란을 채란하였고, 이중에서 17,728만마리의 D상 부유유생(부화율 77.8%)을 확보하였으며, 실내에서 25일간 사육한 후 안점이 형성된 유생 4,750만마리를 대상으로 채묘기를 넣어 총 185만마리의 부착치패를 채묘하였다. 부착치패는 강릉시험포에서 5-60일간 5단계로 나누어 실내 사육한 후 양양군 수산항내 부착치패 중간양성장으로 이동하여 성장과 생존율을 조사한 결과 실내에서 12일간 사육하여 이동한 부착치패의 생존율이 13.0%로 가장 높았다. 이 기간을 제외하면 실내사육기간이 길수록 생존율이 높았으나 성장차이는 실내사육 기간의 장단과는 상관없이 크지 않았다. 강릉시 사천항 연안에 있는 가리비 양식장에서 인공산 및 자연산 부착치패의 성장 및 생존율을 조사한 결과 양양 수산항 내에서 중간양성을 거치고 7월 10일에 본 장소에 수하한 부착치패의 경우 평균각고는 0.9 mm에서 12월 16일에 24.7 mm로 성장하였고 생존율은 85.0%로 나타난 것에 비하여 현지에서 채묘하여 수하한 자연산의 경우는 시작시 평균각고는 0.6 mm에서 종료시에는 23.9 mm로 성장하였으며 생존율은 85.7%로 인공산과 비슷한 결과를 보였다.

  • PDF

하천합류부에서 갈대매트를 이용한 하천식생대 조성에 대한 기초적 연구 (A Fundamental Study on the Effect to Build up a Vegetation Strip at Stream Confluence by Using Reed Mat)

  • 정경진;김미경;안원용
    • 한국환경복원기술학회지
    • /
    • 제6권4호
    • /
    • pp.62-73
    • /
    • 2003
  • The study was to apply a mat style reed planting method at confluence to improve plants growth conditions by relaxing disturbed topographical base due to water flow and was intended to review the effect to build up a vegetation strip by monitoring process after the construction. First off, We've attempted to construct reed mats on selected sites as confluences of Tan and Gaehwa stream and then examined and analyzed characteristics of soil and vegetation community. As the results of the examination, the soil texture was proven to be a mix of sand and loamy sand and be 6.3 ~ 7.0 soil pH. In addition, it contained 1.0 ~ 4.6% of organic matter, 0.04 ~ 0.22% of T-N and 27.8 ~ 41.2% of water content. For its vegetation structure, the Tan stream confluence was first actually a point bar without plants prior to the construction but 8 kinds of hygrophytes including Persicaria hydropiper and 9 kinds of terrestrial plants such as Potentilla supina, Artemisia annua, and Alopecurus aequalis var. amurensis. On the other hand, the Gaehwa stream confluence contained 6 kinds of hygrophytes such as Bidens frondosa and other 11 kinds of terrestrial plants prior to the construction while it produced 7 kinds of hygrophytes including Ranunculus ternatus as well as Phragmites australis and 9 kinds of terrestrial plants such as Potentilla supina after the construction. For the Phragmites australis, almost of them was weathered away in early days just after planting because of development period passed, but on May, six months later from planting, it was investigated that its length was approximated as 65 ~ 85cm with 75% coverage and that the number of it was 437 ~ 633/$m^2$. The study was shown that reed mats can improve environmental conditions of disturbed topographical base, enabling natural growth of various riparian vegetation including the introduced plant, reed. In the meantime, it was supposedly judged that to recover or build up a vegetarian strip, supplementary materials should be prepared to help produce and grow plants because it is not probable to expect river drift by water flow at confluence and that corrosion, burying or inundation owing to changes of water lever should be considered.

STUDIES ON THE TISSUE CULTURE OF PANAX GINSENG

  • Harn C
    • 고려인삼학회:학술대회논문집
    • /
    • 고려인삼학회 1974년도 학술대회지
    • /
    • pp.9-22
    • /
    • 1974
  • Unlike the tissue culture in animals and human being, in higher plants various parts of the plant are cultured for varied purposes, and they are named variously depending on which parts are used as explants or what purposes they are cultured for. Followings are some of the names of culture used frequently: organ culture, tissue culture, callus culture, single cell culture, meristem culture, mericlone culture, ovary culture, ovule culture, embryo culture, endosperm culture, anther culture, pollen culture, protoplast culture, etc.. As the names of the culture indicate, in some kinds of culture the explants used for culture are actually not tissues, but organs, single cells, or protoplasts. It seems, however, convenient to call all of the above-mentioned cultures grossly as tissue culture. Several kinds of tissue culture were attempted using Panax ginseng as material and some of the results were summarized below. 1. Callus culture After dormancy of the sed was broken, whole embryo or parts (hypocotyl, cotyledon and epicotyl) of partly grown embryo were cultured in the media supplemented with growth regulators. Rapid swelling occurred in a few weeks, but most of the swelling was observed only in the basal part of epicotyl, changes in the other parts of embryo appearing in much later stages. The swelling or increase in size, however, was resulted not from the divisions of cells, but from the mere expansion of cell. Real calli were formed about two months after inoculation of explants. Callus tissues developed from cortex, pith, and vascular bundle in the cases of hypo- and epicotyl, from mesophyl tissue in the case of cotyledon. Shoots developed more easily from cotyledons regardless of whether they are detached from or attached to the embryo proper. 2. Culture in the Knudson C medium When cotyledons, detached from or attached to the embryo proper, were cultured in the growth regulator-free Knudson C medium comprision only several kinds of mineral compounds and sucrose, shoot primordium or callus developed profusely and finally plantlets were produced directly from shoot primordium or indirectly through callus. In this medium epidermal cells as well as mesophyl cells of the cotyledon became meristematic and divided, changing into multinucleate cells or multicellular bodies, developing eventually into either shoot primordia or calli. 3. Anther culture Anthers were cultured in the media supplemented with various growth regulators applied singly or in combinations. Callus was formed mostly in the connective tissue of anther. Cells of anther wall layers changed in appearance, but no division occurred. Microspores of all stages in development were not changed, ruling out the possibility that microspore-originated callus might be formed. 4. Isolation of protoplast Protoplasts were isolated from young root, leaf, and epicotyl, using 0.7M D-mannitols as osmoticum and using macerozyme and cellulase respectively for maceration and digestion of the cell wall. Production in large number of naked intact protoplast was rather difficult as compared with other plant species. Fusion of protoplasts occurred infrequently mainly due to the fewer number of naked protoplasts in the solution.

  • PDF

Characterization and crystal growth of InP by VGF method using quartz ampoule

  • Park, E.S.;C.H. Jung;J.J. Myung;J.Y. Hong;Kim, M.K.
    • 한국결정성장학회지
    • /
    • 제9권6호
    • /
    • pp.542-546
    • /
    • 1999
  • InP single crystal, III-V binary compound semiconductor, was grown by VGF(vertical gradient freeze) method using quartz ampoule and its electrical optical properties were investigated. Phosphorous powders were put in the bottom of quartz ampoule and Indium metal charged in conical quartz crucible what was attached at the upper side position inside the quartz ampoule. It was vacuous under the pressure of $10^5$Torr and sealed up. Indium metal was melted at $1070^{\circ}C$ and InP composition was formed by diffusion of phosphorous sublimated at $450^{\circ}C$ into Indium melt. By cooling the InP composition melt ($2^{\circ}C$~$5^{\circ}C$/hr of cooling rate) in range of $1070^{\circ}C$~$900^{\circ}C$, InP crystal was grown. The grown InP single crystals were investigated by X-ray analysis and polarized optical microscopy. Electrical properties were measured by Van der Pauw method. At the cooling method. At the cooling rate of $2^{\circ}C$/hr, growth direction of ingot was [111] and the quality of ingot was better at the upper side of ingot than the lower side. It was found that the InP crystals were n-type semiconductor and the carrier concentration, electron mobility and relative resistivity were $10^{15}$~$10^{16}/\textrm{cm}^3$ , $2\times 10^3$~$3\times 10^4{\textrm}{cm}^2$/Vsec and$2\times 10^{-1}$~$2\times 10^{-3}$/ Wcm in the range of 150K~300K, respectively.

  • PDF

벼 수확동시 보리파종기 이용에 따른 보리생육특성 및 생력효과 (Barley Growth and Labor-Saving Efficiency as Using Barley Seeder Synchronized with Rice Harvesting)

  • 김양길;이중호;서재환;박종철
    • 한국작물학회지
    • /
    • 제49권3호
    • /
    • pp.179-183
    • /
    • 2004
  • 호남지역 보리 2모작 재배농가의 생력화를 위하여 벼 수확 동시 보리파종에 따른 보리의 생육특성 및 생력효과를 조사ㆍ분석한 결과를 요약하면 다음과 같다. 1 벼 수확동시 보리파종은 벼 수확과 동시에 이루어지므로 관행 파종방법보다 5일 이상 빠르게 파종되었다. 2. 벼 수확동시 보리파종재배는 한발시 볏짚피복에 따른 재해 경감효과가 있었으며, 보리수확기 볏짚 C/N율은 31.6%로 낮아졌다. 3. 벼 수확동시 보리파종시 생육특성은 관행재배보다 수수는 감소하였으나 간장, 1수립수 및 천립중 등이 증가하였으며, 수량은 관행 재배보다 평균 6.5% 증수하는 경향이었다. 4. 벼 수확동시 보리파종 작업시간은 파종작업 단계축소로 관행파종방법보다 작업시간이 58%절감되었으며, 경영비는 8% 절감되었고, 소득은 16% 증가하였다.

보릿짚 시용이 콩의 생육 및 수량에 미치는 영향 (Effects of Barley Straw Application on Growth and Yield in Soybean)

  • 김수경;손범영;김대호;김은석;강동주
    • 한국작물학회지
    • /
    • 제45권6호
    • /
    • pp.387-391
    • /
    • 2000
  • 맥류후작 콩 재배시 보릿짚의 시용효과를 구명하기 위하여 보릿짚 시용, 제거 및 소각에 따른 토양 이화학성 및 콩의 생육과 수량에 미치는 영향에 대하여 검토하였던 바를 요약하면 다음과 같다. 1.보릿짚을 시용한 토양의 유기물함량은 보릿짚 제거 및 소각보다 높았으며 수분을 등 물리성의 개선 효과 있었다. 2. 잡초발생은 보릿짚 제거에 비해 보릿짚 시용에서 44%, 소각에서 31% 억제되었다. 3. 근류수 및 근류 건물중은 보릿짚 시용에서 많았다. 4. 식물체 건물중은 보릿짚 시용에서 지상부는 파종 후 30일경까지는 보릿짚 제거에 비해 적었으나, 그 이후단계는 차이가 없었으며, 지하부는 전 생육기간 동안 보릿집 처리 방법에 따른 차이는 없었다. 5.수량은 보릿짚 처리방법에 따른 유의적인 차이는 없었다.

  • PDF

서해 지역별 굴 Crassostrea gigas 성장 특성, 유생 출현량 및 채묘율 (Regional Variations in Pacific Oyster, Crassostrea gigas Growth and the Number of Larvae Occurrence and Spat Settlement along the West Coast, Korea)

  • 임현정;백상호;임매순;최은희;김수경
    • 한국패류학회지
    • /
    • 제28권3호
    • /
    • pp.259-267
    • /
    • 2012
  • Due to the oil spill incident in December 2007, every facility of oyster culture was removed in western coast especially in Taean and Seosan. To restore oyster resources in Taean and Seosan, we brought oyster seeds from southern area and monitored their growth. In addition we monitored the culture environment throughout the year, and observed the number of oyster larvae and attached spats on collectors during summer. The factors of water environment were appropriate for oyster culture in both study area. The growth of shell height was larger in Uihang-ri, Taean than Jungwang-ri, Seosan. Spawning was more intensive in a short time in Jungwang-ri, Seosan than Uihang-ri, Taean. The number of oyster larvae and spats of collectors were much more in Jungwang-ri, Seosan than Uihang-ri, Taean. This study showed that transplantation of healthy oyster seeds from southern area can be a way of restoration of oyster resources in western coast. In addition, systematic approaches are necessary by building a better understanding of regional characteristics to restore and enlarge the oyster culture farms in western coast. In summary Uihang-ri, Taean will be appropriate for cultivation farms and Jungwang-ri, Seosan for seedling grounds to increase oyster culture productivity.

음이온 처리된 몇 가지 새싹채소의 생장과 세균 수 (Growth of and Bacterial Counts on Several Edible Sprouts Exposed to Spray Ionization)

  • 송민정;전유민;오명민
    • 생물환경조절학회지
    • /
    • 제24권1호
    • /
    • pp.45-50
    • /
    • 2015
  • 새싹은 영양분이 풍부한 식품이다. 하지만 생산 과정에서 종피에 있는 미생물에 의한 오염 가능성이 존재한다. 이 실험의 목적은 음이온 처리가 새싹의 생장과 살균에 미치는 효과를 구명하는 것이다. 음이온 처리는 4종류의 새싹의 생장과 살균효과에 긍정적인 효과를 보였다. 대조구에 비해 음이온 처리한 적양배추와 케일 새싹의 배축길이는 약 1.26배 증가하였으며, 상추, 적양배추, 케일 유근의 길이는 1.4~1.6배 증가하였다. 모든 새싹의 생체중은 음이온 처리했을 때 대조구에 비해 16.0~38.5% 유의적으로 증가하였다. 유근의 활력 또한 음이온 처리가 대조구에 비해 유의적으로 높은 수치를 보였다. 음이온 처리된 상추, 적양배추, 다채 새싹의 일반 세균 수는 대조구에 비해 각각 41%, 66%, 19% 감소하였으며, 배수되는 물의 세균 수 또한 감소되었다. 결국 음이온처리는 새싹의 생장을 향상시켰으며, 동시에 살균하는데도 효과적이었다.

확장 유한 요소법(XFEM) J-적분을 이용한 노후 순시선의 균열 성장 수명 예측 (Prediction of Crack Growth Lives of an Aged Korean Coast Guard Patrol Ship based on Extended Finite Element Method(XFEM) J-Integral)

  • 김창식;리춘보;김영훈;정준모
    • 대한조선학회논문집
    • /
    • 제54권4호
    • /
    • pp.335-343
    • /
    • 2017
  • The Newman-Raju formula and contour integral-based finite element analyses(FEAs) have been widely used to assess crack growth rates and residual lives at crack locations in ships or offshore structures, but the Newman-Raju formula is known to be less accurate for the complicated weld details and the conventional FEA-based contour integral approach needs concentrated efforts to construct FEA models. Recently, an extended finite element method(XFEM) has been proposed to reduce those modeling efforts with reliable accuracy. Stress intensity factors(SIFs) from the approaches such as the Newman-Raju formula, conventional FEA-based J-integral, and XFEM-based J-integral were compared for an infinitely long plate with a propagating elliptic crack. It was concluded that the XFEM approach was far reliable in terms of prediction ability of SIFs. Assuming a 25 year-aged coast guard patrol ship had the prescribed cracks at the bracket toes attached to longitudinal stiffeners in way of deck and bottom, SIFs were derived based on the three approaches. To obtain axial tension loads acting on the longitudinal stiffeners, long term hull girder bending moments were assumed to obey Weibull distribution of which two parameters were decided from a reference (DNV, 2014). For the complicated weld details, it was concluded that the XFEM approach could cost-effectively and accurately estimate the crack growth rates and residual lives of ship structures.