• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.10a
• /
• pp.376-377
• /
• 2005

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.10a
• /
• pp.490-491
• /
• 2005

• Korean Journal of Materials Research
• /
• v.18 no.8
• /
• pp.406-410
• /
• 2008

The properties of pyrolytic carbon (PyC) deposited from $C_2H_2$ and a mixture of $C_2H_2/C_3H_6$ on $ZrO_2$ particles in a fluidized bed reactor were studied by adjusting the deposition temperature, reactant concentration, and the total gas flow rate. The effect of the deposition parameters on the properties of PyC was investigated by analyzing the microstructure and density change. The density could be varied from $1.0\;g/cm^3$ to $2.2\;g/cm^3$ by controlling the deposition parameters. The density decreased and the deposition rate increased as the deposition temperature and reactant concentration increased. The PyC density was largely dependent on the deposition rate irrespective of the type of the reactant gas used.

• Nuclear Engineering and Technology
• /
• v.46 no.5
• /
• pp.619-632
• /
• 2014

The Best Estimate Plus Uncertainty (BEPU) method has been widely used to evaluate the uncertainty of a best-estimate thermal hydraulic system code against a figure of merit. This uncertainty is typically evaluated based on the physical model's uncertainties determined by expert judgment. This paper introduces the application of data assimilation methodology to determine the uncertainty bands of the physical models, e.g., the mean value and standard deviation of the parameters, based upon the statistical approach rather than expert judgment. Data assimilation suggests a mathematical methodology for the best estimate bias and the uncertainties of the physical models which optimize the system response following the calibration of model parameters and responses. The mathematical approaches include deterministic and probabilistic methods of data assimilation to solve both linear and nonlinear problems with the a posteriori distribution of parameters derived based on Bayes' theorem. The inverse problem was solved analytically to obtain the mean value and standard deviation of the parameters assuming Gaussian distributions for the parameters and responses, and a sampling method was utilized to illustrate the non-Gaussian a posteriori distributions of parameters. SPACE is used to demonstrate the data assimilation method by determining the bias and the uncertainty bands of the physical models employing Bennett's heated tube test data and Becker's post critical heat flux experimental data. Based on the results of the data assimilation process, the major sources of the modeling uncertainties were identified for further model development.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.57-61
• /
• 1997

A Canadian Deuterium Uranium (CANDU) reactor core calculation was performed using lattice parameters generated by HELIOS. The HELIOS-based lattice parameters were processed by TABGEN in a form suitable for the core analysis code RFSP. The core calculation was performed and the results were compared to those of the reference calculation which uses POWDERPUFS-V (PPV) for the lattice parameter generation. The characteristics of the core calculated based on the PPV and HELIOS lattice parameters match within 0.4%$\Delta$k and 7% for the excess reactivity and the channel power distribution, respectively.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.spc
• /
• pp.75-87
• /
• 2020

The Korea Atomic Energy Research Institute (KAERI) has developed geological repository systems for the disposal of high-level wastes and spent nuclear fuels (SNFs) in South Korea. The purpose of the most recently developed system, the improved KAERI Reference Disposal System Plus (KRS⁺), is to dispose of all SNFs in Korea with improved disposal area efficiency. In this paper, a system-level safety assessment model for the KRS⁺ is presented with long-term assessment results. A system-level model is used to evaluate the overall performance of the disposal system rather than simulating a single component. Because a repository site in Korea has yet to be selected, a conceptual model is used to describe the proposed disposal system. Some uncertain parameters are incorporated into the model for the future site selection process. These parameters include options for a fractured pathway in a geosphere, parameters for radionuclide migration, and repository design dimensions. Two types of SNF, PULS7 from a pressurized water reactor and Canada Deuterium Uranium from a heavy water reactor, were selected as a reference inventory considering the future cumulative stock of SNFs in Korea. The highest peak radiological dose to a representative public was estimated to be 8.19×10^-4 mSv·yr^-1, primarily from ¹²⁹I. The proposed KRS⁺ design is expected to have a high safety margin that is on the order of two times lower than the dose limit criterion of 0.1 mSv·yr^-1.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.18 no.3
• /
• pp.151-160
• /
• 2014

Probabilistic tsunami hazard analysis (PTHA) is based on the approach of probabilistic seismic hazard analysis (PSHA) which is performed using various seismotectonic models and ground-motion prediction equations. The major difference between PTHA and PSHA is that PTHA requires the wave parameters of tsunami. The wave parameters can be estimated from tsunami propagation analysis. Therefore, a tsunami simulation analysis was conducted for the purpose of evaluating the wave parameters required for the PTHA of Uljin nuclear power plant (NPP) site. The tsunamigenic fault sources in the western part of Japan were chosen for the analysis. The wave heights for 80 rupture scenarios were numerically simulated. The synthetic tsunami waveforms were obtained around the Uljin NPP site. The results show that the wave heights are closely related with the location of the fault sources and the associated potential earthquake magnitudes. These wave parameters can be used as input data for the future PTHA study of the Uljin NPP site.

• Nuclear Engineering and Technology
• /
• v.33 no.1
• /
• pp.46-61
• /
• 2001

The neutron cross sections of $^{160}$ Dy, $^{161}$ Dy, $^{162}$ Dy, $^{l63}$Dy, and $^{164}$ Dy have been evaluated in the resonance region of which upper energy is set to several tens of keV. The cross sections are formulated with resonance parameters in the energy region under consideration. In the resolved resonance region, the positive-energy resonance parameters were adopted from the BNL compilation published in 1984 with slight, if any, modifications. A bound level resonance for each isotope except $^{162}$ Dy was invoked to reproduce the reference 2200 m/s cross sections and the bound coherent scattering length. Subsequently, the statistical behavior of the resolved resonance parameters was analyzed, and thus obtained s-wave average parameters were adopted in the unresolved resonance region. In addition, recent measurements of the capture cross sections in the unresolved region were taken into account in adjusting the average resonance parameters for high orbital angular momentum resonances. The present evaluation resulted in large improvements in the cross sections over the ENDF/B-Vl release 6.6.

• Nuclear Engineering and Technology
• /
• v.34 no.6
• /
• pp.586-595
• /
• 2002

The Seismic probabilistic risk assessment (SPRA) or seismic margin assessment (SMA) have been used for the seismic safety evaluation of nuclear power plant structures and equipments. For the SPRA or SMA, the reference response spectrum should be defined. The site-specific median spectrum has been generally used for the seismic fragility analysis of structures and equipments in a Korean nuclear power plant Since the site-specific spectrum has been developed based on the peak ground motion parameter, the site-specific response spectrum does not represent the same probability of exceedance over the entire frequency range of interest. The uniform hazard spectrum is more appropriate to be used in seismic probabilistic risk assessment than the site- specific spectrum. A method for modifying the seismic fragility parameters that are calculated based on the site-specific median spectrum is described. This simple method was developed to incorporate the effects of the uniform hazard spectrum. The seismic fragility parameters of typical NPP components are modified using the uniform hazard spectrum. The modification factor is used to modify the original fragility parameters. An example uniform hazard spectrum is developed using the available seismic hazard data for the Korean nuclear power plant (NPP) site. This uniform hazard spectrum is used for the modification of fragility parameters.

• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4583-4590
• /
• 2023

This study aims at modeling the beryllium reflector poisoning under neutron irradiation conditions and calculating the impact of beryllium poisoning on the core parameters of ETRR-2 research reactor. The CITVAP code was used to calculate the neutron flux and parameters of ETRR-2 core with beryllium reflector elements. The neutron flux in each reflector element was calculated to solve the modeling equations for the atomic densities of lithium-6 (⁶Li), tritium-3 (³H), and helium-3 (³He) using the BERYL program. The results are discussed based on CITVAP calculations of the core excess reactivity and cycle length Full Power Days (FPD). Possible solutions to minimize the degradation due to beryllium poisoning are also discussed and compared based on calculations.