• 한국전기전자재료학회논문지
• /
• 제32권5호
• /
• pp.432-436
• /
• 2019

In this study, we produced a light, flexible, wearable gas sensor by depositing MWCNTs (Multi-walled Carbon Nanotubes) into nylon. MWCNTs are widely used as a gas sensor material due to their excellent mechanical, electrical and physical characteristics. We produced a gas sensor to detect NOx gases by depositing nylon yarn in a MWCNT solution. The MWCNT solution was made by mixing 3 mg MWCNT in 5 ml of ethanol. Nylon yarn was placed in the manufactured solution and ultrasonic waves were applied using an ultrasonicator for 3 h, resulting in MCWNT deposition. The MWCNT-deposited nylon yarn was dried at room temperature for 24 h. The MWCNT-thin-film-coated nylon yarn was masked 1 mm apart, and gold was then deposited on the masked nylon yarn to create the gas sensor. The sensor then was installed in a chamber with a controlled atmospheric environment and exposed to NOx gas. The changing signal from the sensor was amplified to analyze its gas detection characteristics.

• 센서학회지
• /
• 제8권2호
• /
• pp.115-123
• /
• 1999

PSG(800nm)/$Si_3N_4$ (150nm)로 구성된 유전체 membrane 윗면에 heater와 감지전극을 등일면상에 동시에 형성하였다. 제작된 소자의 전체 면적은 $3.78{\times}3.78mm^2$이고, diaphragm의 면적은 $1.5{\times}1.5mm^2$이며, 감지막치 면적은 $0.24{\times}0.24mm^2$였다. 그리고 diaphragm내의 열분포 분석을 유한요소법을 이용하여 수행하였으며, 실제로 제작된 소자의 열분포와 비교하였다. 소비전력은 동작온도 $350^{\circ}C$에서 약 85mW였다. Sn 금속막을 상온과 $232^{\circ}C$의 두 가지 기판온도에서 열증착하였고, 이를 $650^{\circ}C$의 산소분위기에서 3시간 열산화함으로써 $SnO_2$ 감지막을 형성하였다. 그리고 이를 SEM과 XRD로 특성을 분석하였다. 제작된 소자에 대해서 온도 및 습도에 대한 감지막의 영향 및 부탄가스에 대한 반응특성도 조사하였다.

• 한국대기환경학회지
• /
• 제28권3호
• /
• pp.325-347
• /
• 2012

Long-term air and weather data monitored during the period of 2000 to 2009 were analyzed to quantitatively estimate the precipitation scavenging and wind dispersion contributions of ambient $PM_{10}$ and $NO_2$ in Korea. Both air pollutants and meteorological data had been respectively collected from 120 stations by the Ministry of Environment and from 20 weather stations by the Korea Meteorological Administrations in all parts of Korea. To stochastically identify the relation between a meteorological factor and an air pollutant, we initially defined the SR (scavenging ratio) and the DR (dispersion ratio) to separately calculate the precipitation and wind speed effects on the removal of a specific air pollutant. We could then estimate the OSC (overall scavenging contribution) and the ODC (overall dispersion contribution) with considering sectoral precipitation and wind speed probability density distributions independently. In this study, the SRs for both $PM_{10}$ and $NO_2$ were generally increased with increasing the amounts of precipitation and then the OSCs for $PM_{10}$ and $NO_2$ were estimated by 22.3% and 15.7% on an average in Korea, respectively. However, the trend of the DR was quite different from that of SR. The DR for $PM_{10}$ was increased with increasing wind speed up to 2.5 m/s and further the DR for $NO_2$ showed a minimum in the range of $1<WS{\leq}1.5$. The ODCs for $PM_{10}$ and $NO_2$ were estimated by 14.9% and 1.0% in Korea, respectively. Finally, we have also provided an interesting case study observed in Seoul.

• 농약과학회지
• /
• 제10권2호
• /
• pp.91-98
• /
• 2006

일본의 시중 판매 및 노지재배 시금치 중 다이옥신 잔류함량을 평가하여 다이옥신 분석에 적정한 농산물 시료량을 검토함과 동시에 농작물과 재배환경 중 잔류함량 상관성에 대하여 다이옥신 동족체별로 비교 연구하였다. 1 Kg 미만을 처리한 시판되는 시금치의 OCDF은 베이스라인에 가깝게 검출되었으나, 2 kg 이상을 처리한 노지재배 시금치의 경우 확실하게 검출되었다. 시판 시금치 재배환경의 대기 중 다이옥신 동족체별 잔류함량 경향이 노지재배 시금치의 재배환경과 유사한 경향을 나타내므로, 정확한 다이옥신 peak 평가를 하기 위해서는 2 kg이상의 시료가 필요하다는 결과를 얻었다. 또한 노지재배 시금치 잎 중 다이옥신 동족체별 잔류함량의 전체 경향을 비교하면 토양에 분포하고 있는 OCDD와 HCDF의 영향을 받은 듯하나 전체적으로는 대기 강하물에 의한 영향이 주요 요인으로 판단된다.

• 한국대기환경학회지
• /
• 제13권5호
• /
• pp.371-381
• /
• 1997

Precipitation sampls were collected in Chonju-city during October 1994 to September 1995 and were analysed for major ions (N $a^{+}$, $K^{+}$, $Ca^{2+}$, $Mg^{2+}$, C $l^{[-10]}$ , NO/$_3$, S $O_4$$^{2-}$) and trace metals (Al, Cd, Ni, Pb, Sr, Zn) in addition to pH, in order to understand the chemical characteristics of acid rain and to estimate the origin of the determined ions. Most rain showed a neutral or alkaline character, and only 35% had a pH lower than 5.6. S $O_4$$^{2-}$ and N $O_3$$^{[-10]}$ are identified as the primary contributors to precipitation acidity in this region. Neutralization of precipitation acidity occurs as a result of the dissolution of alkaline compounds containing $Ca^{2+}$, $Mg^{2+}$ and $K^{+}$. S $O_4$$^{2-}$ and N $O_3$$^{[-10]}$ precipitation concentrations exhibit a seasonal pattern in which higher concentrations are observed during spring months and lower concentrations during summer months. However, the seasonal behavior of $H^{+}$ concentrations differs from this pattern, in that the highest concentrations occur during autumn months, owing to the different influence of neutralization processes. In all rain, S $O_4$$^{2-}$ concentration exceeded NO/$_3$$^{[-10]}$ concentration. The contribution of maritime sources to the total S $O_4$$^{2-}$ concentration was very low or negligible. For rain strongly affacted by yellow sand, $Ca^{2+}$, $Mg^{2+}$ and $K^{+}$ ions show a sharp increase in concentration, reflecting the increased amount of dust and soil suspended in atmosphere. At the same time, S $O_4$$^{2-}$ and N $O_3$$^{[-10]}$ concentrations are at their highest levels while $H^{+}$ values are not comparably elevated, presumably beacause much of the acidity has been neutralized by alkaline substances. The seasonal variance of trace metal concentrations in rainwater is similar to that of major cations. The annual wet flux of acidic pollutants and trace metals wat calculated to be as follows: N $O_3$$^{[-10]}$ ; 2.32 g/$m^2$, S $O_4$$^{2-}$, 5.34 g/$m^2$, Al; 6.30 mg/$m^2$, Cd; 0.62 mg/$m^2$, Ni; 4.08 mg/$m^2$, Pb: 9.76 mg/$m^2$, Sr; 5.94 mg/$m^2$, Zn; 111 mg/$m^2$./$m^2$.

• Asian Journal of Atmospheric Environment
• /
• 제6권4호
• /
• pp.268-274
• /
• 2012

To perform quick measurements of black carbon (BC) particles deposited on foliar surfaces of forest tree species, we investigated an optical method for measuring the amount of BC extracted from foliar surfaces and collected on quartz fiber filters. The seedlings of Fagus crenata, Castanopsis sieboldii, Larix kaempferi and Cryptomeria japonica were exposed to submicron BC particles for one growing season (1 June to 7 December 2009). At the end of the growing season, the leaves or needles of the seedlings were harvested and washed with deionized water followed by washing with chloroform to extract the BC particles deposited on the foliar surfaces. The extracted BC particles were collected on a quartz fiber filter. The absorption spectrum of the filters was measured by spectrophotometer with an integrating sphere. To obtain the relationship between the absorbance of the filter and the amount of BC particles on the filter, the amount of BC particles on the filter was determined as that of elemental carbon (EC) measured by a thermal optical method. At wavelengths below 450 nm, the absorption spectrum of the filter showed absorption by biological substances, such as epicuticular wax, resulting in the low coefficient of determination ($R^2$) in the relationship between the amount of EC on the filter ($M_{EC}$, ${\mu}g\;C\;cm^{-2}$ filter area) and the absorbance of the filter. The intercept of the regression line between $M_{EC}$ and the absorbance of the filter at 580 nm ($A_{580}$) was closest to 0. There was a significant linear relationship between the $A_{580}$ and $M_{EC}$ ($R^2$=0.917, p<0.001), suggesting that the amount of BC particles collected on the filter can be predicted from the absorbance. This optical method might serve as a simple, fast and cost-effective technique for measuring the amount of BC on foliar surfaces.

• 한국환경보건학회지
• /
• 제35권1호
• /
• pp.21-35
• /
• 2009

The Asian dust storms which originated in the deserts of Mongolia and China transported particles to Korea and led to a high concentration of atmospheric particulate matters (PM) of more than $1000{\mu}g/m^3$ throughout the country in the spring, of 2007. Public concern, in Korea, about the possible adverse effects of these dust events has increased, as these dust storms can contain various air pollutants emitted from heavily industrialized eastern China. The objectives of this study were to understand the concentration characteristics of PM as a function of particle size between the Asian dust storm episodes and non-Asian dust period and to consider the mass size distribution of PM in the Asian dust storms and their water soluble ion species on the potential, possible effects on deposition levels in the three regions (nasopharyngeal, tracheobronchial, and alveolar) of the human respiratory system. The size distribution of PM mass concentration during the Asian dust storms showed a peak in the coarse particle region due to the long-range transport of soil particles from the deserts of Mongolia and China, which was identified by HYSPLIT-4 model for backward trajectory analysis of air arriving in the sampling site of Iksan. During the non-Asian dust period, there were two different types in PM size distribution: bimodal distribution when low concentrations of $PM_{2.5}$ were observed, while unimodal distribution having a peak in fine particle region when high concentrations of $PM_{2.5}$ were showed. This unimodal distribution with high concentrations of fine particulate and secondary air pollutants such as ${SO_4}^{2-}$, ${NO_3}^-$, ${NH_4}^+$ was found to be due to the long-range transport of air pollutants from industrialized eastern China. During the Asian dust storms, the mean concentrations of PM that can be deposited in the nasopharyngeal, tracheobronchial, and alveolar region were $128.8{\mu}g/m^3$, $216.5{\mu}g/m^3$, and $89.6{\mu}g/m^3$, respectively. During the non-Asian dust period, the mean concentrations of PM that can be deposited in the nasopharyngeal, tracheobronchial, and alveolar region were $8.4{\mu}g/m^3$, $9.5{\mu}g/m^3$ and $38.5{\mu}g/m^3$, respectively.

• 한국지구과학회지
• /
• 제43권1호
• /
• pp.91-109
• /
• 2022

해양은 대기로 배출된 이산화탄소의 30% 가량을 흡수하여 대기 중 이산화탄소 농도를 감소시키는 역할을 하였으나, 이 때문에 해양의 pH와 탄산염 이온(CO₃^2-)이 감소하는 해양산성화 현상을 겪고 있다. 본 논문에서는 황해 연안역의 신규 관측자료를 타 해역에서 획득된 기존 연구자료와 합쳐서 우리나라 주변 해역의 해양산성화 현황을 파악하고자 하였다. 우리나라 주변의 황해, 동해, 동중국해(남해 포함)는 대기 중 이산화탄소를 흡수하고 있으나, 외해 대부분의 해역에서 해양산성화의 지표인 아라고나이트 포화도가 1 이상인 것으로 나타났다. 남해 동부 연안역에서는 담수 공급으로 인한 희석과 성층 형성, 생물에 의한 유기물 생성과 분해가 표층과 저층의 계절적 해양산성화 변동에 큰 영향을 끼쳤다. 진해만은 빈산소화 현상, 광양만은 담수로 인한 희석으로 여름철 광범위한 해역에서 아라고나이트 포화도가 1 미만으로 감소하여, 탄산칼슘 패각(CaCO₃ shell)을 가진 생물들에게 잠재적 위협이 될 것으로 보고되었다. 하지만 담수 유입이 많은 황해 연안역에서는 진해만과 광양만과 같이 뚜렷하고 광범위한 산성화는 발견되지 않았기 때문에, 연안역에서는 각 해역별 특성에 따라 해양산성화의 양상을 진단해야 할 필요가 있었다. 우리나라 동해 남서부 해역의 계절적 용승 현상 역시 해양산성화에 영향을 미칠 수 있다. 이런 계절적 요인과 더불어, 대기 중의 이산화탄소 및 산성물질이 해양으로 계속 유입되면서, 우리나라 바다의 아라고나이트 포화도가 지속적으로 감소할 것으로 예상된다. 따라서 해양산성화로부터 수산자원과 해양생태계를 보호하기 위해 향후 체계적인 해양산성화 모니터링을 강화해야 할 것이다.

• 한국전기전자재료학회논문지
• /
• 제23권8호
• /
• pp.651-654
• /
• 2010

This paper describes the thermal and mechanical properties of doped thin film 3C-SiC and porous 3C-SiC. In this work, the in-situ doped thin film 3C-SiC was deposited by using atmospheric pressure chemical vapor deposition (APCVD) method at $120^{\circ}C$ using single-precursor hexamethyildisilane: $Si_2(CH_3)_6$ (HMDS) as Si and C precursors. 0~40 sccm $N_2$ gas was used as doping source. After growing of doped thin film 3C-SiC, porous structure was achieved by anodization process with 380 nm UV-LED. Anodization time and current density were fixed at 60 sec and 7.1 mA/$cm^2$, respectively. The thermal and mechanical properties of the $N_2$ doped porous 3C-SiC was measured by temperature coefficient of resistance (TCR) and nano-indentation, respectively. In the case of 0 sccm, the variations of TCR of thin film and porous 3C-SiC are similar, but TCR conversely changed with increase of $N_2$ flow rate. Maximum young's modulus and hardness of porous 3C-SiC films were measured to be 276 GPa and 32 Gpa at 0 sccm $N_2$, respectively.

• 대한환경공학회지
• /
• 제34권10호
• /
• pp.702-708
• /
• 2012

사불화탄소($CF_4$)는 반도체 제조공정에서 에칭과 화학기상증착(CVD)에서 사용되어온 가스이다. $CF_4$는 적외선을 강하게 흡수하고 대기 중 잔류시간이 길어서 지구온난화에 영향을 미치기 때문에 고효율의 분해가 필요하다. 또한 불화수소를 포함한 폐수는 지하수 오염의 원인이 된다. 과도한 불소를 포함한 물을 장기간 섭취는 치아와 뼈에 문제를 야기한다. 워터젯 플라즈마를 이용하여 $CF_4$를 분해 후 생성되는 부산물 중 HF에 의하여 폐수가 생성된다. 이 폐수를 알루미늄 전극을 사용한 전해응집을 이용하여 폐수 중 HF를 제거 할 수 있는 시스템을 개발하였다. 실험 변수로는 초기 pH 변화, 반응 시간 변화, 주입유량 변화, 전류 밀도 변화를 실험하였다. 변수 실험을 통하여 초기 pH는 3.5, 반응 시간은 10 min, 주입 유량은 10 mL/min, 전류 밀도는 $159A/m^2$일 때 HF 제거율은 최고 85%까지 도달하였다.