• Title/Summary/Keyword: Atmospheric Environmental Impact Assessment

Search Result 114, Processing Time 0.025 seconds

The Study on the Improvement of Environmental Assessment Method through Analysis of Environmental Investigation Results of Taean Thermal Power Plant (환경영향평가와 사후환경조사의 비교에 관한 연구 - 태안화력발전소 사례분석 -)

  • Chun, Sang-Ki;Lee, Sung-Chul
    • Journal of Environmental Impact Assessment
    • /
    • v.9 no.1
    • /
    • pp.61-74
    • /
    • 2000
  • This study compares the results of environmental impact assessment with the results of post-environmental investigation, using the case of Taean thermal power plant construction. The atmospheric and water qualities were not greatly changed before and after the construction of the power plant. However, the site of the highest concentration predicted by the atmospheric quality modeling in environmental impact assessment was different from that after operation of 4 power plants. There was also a difference in the diffusion range of thermal discharge water between the measured result(1km) and the predicted value(1.5km) with the model. Thus, environmental impact evaluation should be based on long-term (more than a year) environmental monitoring data. For the modeling of atmospheric quality and numerical thermal discharge water diffusion, appropriate models for each plant should be selected and the numerical modeling should be accompanied by computer simulation, wind tunnel test, etc. Moreover, environmental evaluation should focus more on the degree of impact on surroundings than the prediction of changes in surroundings caused by operation of plants.

  • PDF

On the applications of AWS into the Four-Dimensional Data Assimllation Technique for 3 Dimensional Air Quality Model in Use of Atmospheric Environmental Assessment (환경영향평가용 대기질 모델을 위한 AWS자료의 4 차원 동화 기법에 관한 고찰)

  • Kim, Cheol-Hee
    • Journal of Environmental Impact Assessment
    • /
    • v.11 no.2
    • /
    • pp.109-116
    • /
    • 2002
  • The diagnostic and prognostic methods for generating 3 dimensional wind field were comparatively analyzed and 4 dimensional data assimilation (FDDA) technique by incorporating Automatic Weather System (AWS) into the prognostic methods was discussed for the urban scale air quality model. The A WS covered the urban scale grid distance of 10.6 km and 4.3 km in South Korea and Kyong-in region, respectively. This is representing that AWS for FDDA could be fairly well accommodated in prognostic model with the meso${\gamma}$~ microa scale (~5 km), indicating that the 3 dimensional wind field by FDDA technique could be a useful interpretative tool in urban area for the atmospheric environmental impact assessment.

Review on Air Quality Modeling in Environmental Impact Assessments (환경영향평가시 대기확산모델의 사용현황과 개선방안)

  • 김석철;이영수
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.15 no.6
    • /
    • pp.827-841
    • /
    • 1999
  • The air quality simulation models in wide use for air quality impact assessmetns are reviewed. After an intensive survey and comparative study upon the environmental impact assessment reports submitted to Ministry of Environment during 1990~1998, we could identify the major common problems with the air quality impact assessment procedures. Several remedies are presented here, including use of the screening models applicable to the complex terrain.

  • PDF

Classification of Synoptic Meteorological Patterns for the Environmental Assessment of Regional-scale Long Range Transboundary Air Pollutants (지역규모 장거리 대기오염 이동물질의 환경영향평가를 위한 종관기상 조건의 분류)

  • Kim, Cheol-Hee;Son, Hye-Young;Kim, Ji-A;Ahn, Tae-Keun
    • Journal of Environmental Impact Assessment
    • /
    • v.16 no.1
    • /
    • pp.89-98
    • /
    • 2007
  • In order to conduct the environmental assessment of long range transboundary air pollutants over East Asia, the moving pathways of air pollutants are of great importance, which are depending upon the meteorological weather patterns. Therefore regional scale modeling study requires the identified geopotential height distribution patterns to deal with behaviors of long range transport air pollutants for the effective long term atmospheric environmental assessment. In this study the synoptic meteorological classification using cluster analysis technique over Northeast Asia, and its previous applications of the regional scale air pollutant modeling studies were reviewed and summarized in detail. Other synoptic meteorological characteristics over Korean peninsula are also discussed.

The Impact Assessment of Urbanization on the Atmospheric Environment (도시화가 대기환경에 미치는 영향평가)

  • Lee, Hyoun-Young
    • Journal of Environmental Impact Assessment
    • /
    • v.4 no.3
    • /
    • pp.73-86
    • /
    • 1995
  • This paper demonstrates Environmental Impact Assessment (EIA) has to be applied for development projects with regard to the ecological, economical and social aspects before any decisions made in the project. Korea has confronted various environmental problems during the last fifteen years, even though EIA has been enacted since 1981. The role of impact assessment in planning and policy processes should be emphasized to investigate the magnitude and intensity of the adverse influences of economic development. In the Seoul Metropolitan Region, it is necessary to apply EIA all urban projects to reduce the adverse effects of urbanization. Special attention should be given to the climatological effects throughout the urbanization process in Korea to keep the urban area energy-efficient. This study intends not only to establish basic data for national-and regional-based land-use policy in the environmental aspects, but also to provide the basic data for the possible climate model (scenarios) that may provide spatial and temporal variability by analyzing the actual climatic record. There is a noticeable impact of urbanization on the atmospheric environment in the Seoul Metropolitan Region. In this sense, the climatic aspect must be taken into consideration in the process of EIA to mitigate the well-known climatic alterations of urbanization. Moreover, the techniques of assessment should be improved by developing geo-reference data sets to build models of the global climate in response to the man-made environmental change.

  • PDF

Classification of Synoptic Meteorological Conditions for the Medium or Long Term Atmospheric Environmental Assessment in Urban Scale (도시규모 중·장기 대기질영향평가를 위한 종관기상조건의 분류)

  • Kim, Cheol-Hee;Son, Hye-Young;Kim, Ji-A
    • Journal of Environmental Impact Assessment
    • /
    • v.16 no.2
    • /
    • pp.157-168
    • /
    • 2007
  • In case there is a need to run the multi-year urban scale air qulaity model, it is a difficult task due to the computational demand, requiring the statistical approach for the long time atmospheric environmental assessment. In an effort to approach toward long term urban assessment, the sixteen synoptic meteorological conditions are statistically classified from the estimated geostrophic wind speeds and directions of 850 hPa geopotential height field during 2000 ~ 2005. The geostrophic wind directions are subdivided into four even intervals (north, east, south, and west), geostrophic wind speeds into two classes(${\leq}5m/s$ and >5m/s), and daily mean cloud amount into 2 classes(${\leq}5/10$ and >5/10), which result into sixteen classes of the synoptic meteorological cases for each season. The frequency distributions for each 16 synoptic meteorological case are examined and some discussions on how these synoptic classifications can be used in the environmental assessment are presented.

A Case Study on the Health Impact Assessment of Residential Development Projects (주거지 개발사업에 대한 건강영향평가 사례 연구)

  • Shin, Moonshik;Dong, Jongin;Ha, Jongsik
    • Journal of Environmental Impact Assessment
    • /
    • v.29 no.5
    • /
    • pp.391-402
    • /
    • 2020
  • Health Impact Assessment based on municipal law is performed and written in the sanitary and public health part in the current environmental impact assessment. Residential development projects such as housing site development etc., are not subject to health impact assessment under Article 13 of the Environmental Health Act. However, health impact assessment is conducted partially based on the review that health impact assessment targets which are identified among substances emitted from pollutants nearby industrial complexes should be assessed risk (including carcinogenic and non-carcinogenic) at the stage of the environmental impact assessment consultation. Although residential development projects do not have plans for pollutant emitting facilities that emit hazardous air pollutants, there is a possibility that residents might be affected by pollutants from industrial complex near residential area in the future. In this study, Health impact assessment was conducted to examine the impact on residents in planned areas by analyzing previous residential development projects. We predicted future impact by using the literature survey results on surrounding area (case1) and conducting contribution analysis (case2) and predicting exposure concentration of carcinogenic substances applying Atmospheric Diffusion Model (AERMOD). By this study, we concluded that applying on-site survey, contribution analysis and prediction of exposure concentration by using AERMOD complementarily will be effective to assess the health impact to the receptors by pollutants from industrial complexes near the planned zone.

Setting the Current Air Quality Concentration Using the National Atmosphere Measurement Network

  • CHO, Dong-Myung;LEE, Ju-Yeon;KWON, Lee-Seung;KIM, Su-Hye;KWON, Woo-Taeg
    • Journal of Wellbeing Management and Applied Psychology
    • /
    • v.4 no.3
    • /
    • pp.23-33
    • /
    • 2021
  • Purpose: In the course of the domestic environmental impact assessment, the current status survey was improperly conducted, and the issue of false and inaccurate environmental impact assessment reports has been raised several times recently through media reports. Research design, data and methodology: There is a continuous demand for improvement measures for the current status measurement method, such as having difficulties in securing a normal measurement date in consideration of equipment operation and rainfall days in the field. Results: In addition, in order to grasp the general air quality status of the evaluation target area, it is necessary to check the various current status concentrations by season and time series per year. However, there is a problem that is currently being carried out based on limited results such as measurement for 1 day or 3 days. Conclusions: Therefore, in this study, based on the national atmospheric measurement network, an inverse distance weighted (IDW) interpolation method was applied to calculate the current state concentration. This study suggested a method to use it in preparing the air quality item in the environmental impact assessment report.

A Status of Atmospheric Environmental Impact Assessment and Future Prospects (대기환경영향평가 현황 및 향후 과제)

  • Koo, Youn-Seo;Choi, Dae-Ryun;Kim, Sung-Tae;Lee, Beom-Ku;Yu, Jung-Min;Lee, Seung-Hoon;Cheong, Chang-Yong;Lim, Jeong-Dae
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.29 no.5
    • /
    • pp.581-600
    • /
    • 2013
  • The current status of atmospheric environmental impact assessment (EIA) has been summerized and future prospective for effective and accurate atmospheric EIA has been proposed by reviewing available papers and reports for the atmospheric EIA. The number of reports for the EIA in the EIA support system which is operated by the Korean Environmental Institute have been dramatically decreased from 282 reports in 2008 to 113 reports in 2012 during recent five years. This is partially due to simplification of the EIA procedure, the contraction of the public development and economic recession. We analyzed details of the EIA report to review how actual atmospheric EIA has preformed according to the EIA guidelines from the Korean Ministry of Environment. The 264 reports of EIA published in 2011 and 2012 had been reviewed especially focusing on the atmospheric evaluation items such as meteorology, air quality measurement and modeling, odor measurement and modeling, wind corridor in urban planning, and climate change. In overall sense, the atmospheric EIA has been performed quite well by abiding the guidelines except for local meteorological data measurement, permit standard for air quality and wind corridor. The new approaches to improve the procedure of atmospheric EIA and to reflect future of national air quality standard of $PM_{2.5}$ have been proposed. The guidelines on how to evaluate the wind corridor, to implement atmospheric EIA for $PM_{2.5}$ permit, and how to acquire local meteorological data by combining local measurement and model prediction are required for the effective and future oriented atmospheric EIA.

The Joint Frequency Function for Long-term Air Quality Prediction Models (장기 대기확산 모델용 안정도별 풍향·풍속 발생빈도 산정 기법)

  • Kim, Jeong-Soo;Choi, Doug-Il
    • Journal of Environmental Impact Assessment
    • /
    • v.5 no.1
    • /
    • pp.95-105
    • /
    • 1996
  • Meteorological Joint Frequency Function required indispensably in long-term air quality prediction models were discussed for practical application in Korea. The algorithm, proposed by Turner(l964), is processed with daily solar insolation and cloudiness and height basically using Pasquill's atmospheric stability classification method. In spite of its necessity and applicability, the computer program, called STAR(STability ARray), had some significant difficulties caused from the difference in meteorological data format between that of original U.S. version and Korean's. To cope with the problems, revised STAR program for Korean users were composed of followings; applicability in any site of Korea with regard to local solar angle modification; feasibility with both of data which observed by two classes of weather service centers; and examination on output format associated with prediction models which should be used.

  • PDF