• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.473-477
• /
• 2015

In this paper, a commercial phosphorescent white light-emitting diode (WLED) visible light communication (VLC) system with an equalization circuit to achieve the high modulation bandwidth was designed and demonstrated. An analytical method to examine the performance of the equalizer was carried out using a general circuit-simulator, PSpice. The equalization circuit was composed of two passive filters with resisters and a capacitor and an active filter with an op-amp. Utilizing our post-equalization technology, the ~3.5 MHz bandwidth of phosphor WLED could be extended to ~25 MHz without using an optical blue-filter. In this VLC system with a single round-type WLED and a single PIN photo-diode, ASK data transmission up to 35 Mbps at a 1m free space distance was obtained. The resulting bit-error-rate was $7.6{\times}10^{-4}$, which is less than the forward error correction (FEC) limit of $3.8{\times}10^{-3}$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.12
• /
• pp.1337-1342
• /
• 2012

In this paper, we propose a novel reconfigurable antenna that can change the electrical shape of the matching network using RF switches of PIN diodes. The designed antenna operates at two different modes that are Mode 1 (HSDPA band, 2.1~2.2 GHz) and Mode 2(WiBro WiFi band, 2.3~2.5 GHz). The antenna is built on both sides of a polyarcylate substrate. The measured reflection coefficient shows a matching bandwidth of 547 MHz($S_{11}$ <-3 dB, 2.035~2.582 GHz) for Mode 1 and 600 MHz($S_{11}$ <-3 dB, 2.2~2.8 GHz) for Mode 2, and it shows average vertical gains of -4.4 dBi and -4.5 dBi in x-y plane, respectively.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.717-722
• /
• 2004

A design was done, and all characteristic of photodetectr of the web pattern type which a standard process of the Bipolar which Si PIN structure was used in this paper, and was used for the current amplifier design was used, and high-speed, was used as receiving optcal area of high altitude, and the module which had a low dark current characteristic was implemented with one chip with a base. Important area decreases an area of Ie at the time of this in order to consider an electrical characteristic and economy than the existing receiving IC, and performance of a product and confidence are got done in incense. First of all, the receiving IC which a spec, pattern of a wafer to he satisfied with the following electrical optical characteristic that produced receiving IC of 5V and structure are determined, and did one-chip is made. On the other hand, the time when AR layer of double is $Si_{3}N_{4}/SiO_{2}=1500/1800$ has an optical reflectivity of less than $10{\%}$ on an incidence optical wavelength of 660 ,and, in case of photo detector which reverse voltage made with 1.8V runs in 1.65V, an error about a change of thickness is very the thickness that can be improved surely. And, as for the optical current characteristic, about 5 times increases had the optical current with 274nA in 55nA when Pc was -27dBm. A BJT process is used, and receiving IC running electricity suitable for low voltage and an optical characteristic in minimum 1.8V with a base with two phases is made with one chip. IC of low voltage operates in 1.8V and 3.0V at the same time, and optical link receiving IC is going to be implemented

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.6
• /
• pp.786-795
• /
• 2011

This paper described the characteristic of vibration in wind turbine system including gearbox housing, gear drive, blade, generator. Especially, in planetary gear set, planet gears are supported by flexible pin. So, in planet gear, to consider not only torsional movement but also lateral movement. And include housing movement, because wind turbine system is supported by mount. To find out the characteristic of vibration, take the excitation source and study campbell diagram in operating range. Results of campbell diagram, resonances are occurred at 81.2HZ, 104.7Hz by 2nd tooth passing frequency. And resonance are also occurred at 264.5HZ, 377Hz, 424.6Hz by 3th tooth passing frequency. From the result, take vibration reduced measures.

• Preventive Nutrition and Food Science
• /
• v.18 no.1
• /
• pp.50-59
• /
• 2013

Black jujube was made by aging dried jujube and its physiochemical characteristics, antioxidant activities and ${\alpha}$-glucosidase inhibitory activities were evaluated. The moisture and sugar contents were increased depending on the period of aging times and the pH was reduced thereby increasing acidity. The color of black jujube extract was changed from red to black resulting in decreases of Hunter color values L, a and b. As the aging progressed, sucrose was decomposed by increasing glucose and fructose, indicating higher contents of the total reducing sugars. Among the six different types of organic acids extracted from dried jujube, the levels of oxalic acid and citric acid were increased as the aging progressed. The total polyphenol contents in ethanol and water extracts of dried jujube were 7.74 and 8.12 mg/g, respectively. The water extract of black jujube aged for 48 hr contained the highest polyphenol contents at 16.82 mg/g. The 5'-hydroxymethylfurfural (5'-HMF) contents of black jujube extract significantly increased by longer aging times, and contained higher contents in the ethanol extract than water extract. The ethanol extract of black jujube showed the highest 5'-HMF content with 338.89 mg% after aging for 3 days. Also, $IC_{50}$ values of black jujube aged for 72 hr evaluated by DPPH and ABTS radical assays were 0.54 and 0.59 mg/mL, respectively. ${\alpha}$-Glucosidase inhibitory activities of black jujube at the concentration of 3.33 mg/mL (ethanol extract) increased from 65 to 80 % after aging for 72 hr.

• Tribology and Lubricants
• /
• v.34 no.2
• /
• pp.49-54
• /
• 2018

Hydraulic reciprocating seal has been widely used to prevent fluid leakage in hydraulic systems. Also, hydraulic reciprocating seal plays a significant role to provide lubricant film at contacting interface to minimize tribological problems due to sliding with counter material. To predict lifetime of hydraulic reciprocating seal, quantitative understanding of wear characteristics with respect to operating conditions such as normal force and sliding speed is needed. In this work, effect of sliding speed on wear of polyurethane (PU) hydraulic reciprocating seal were experimentally investigated using a pin-on-disk tribo-tester. The wear characteristics of PU specimens were quantitatively determined by comparing the confocal microscope data before and after test. It was found that the wear rate of PU specimens decreased from $4.9{\times}10^{-11}mm^3$ to $1.1{\times}10^{-11}mm^3/Nm$ as sliding speed increased from 120 mm/s to 940 mm/s. Also, it was observed that the friction decreased slightly as the sliding speed increased. Improvement of lubrication state with increasing sliding speed was likely to be responsible for this enhanced friction and wear characteristics. This result also suggests that decrease in sliding distance between PU elastomer and counter materials at lower sliding speed is preferred. Furthermore, the quantitative assessment of wear characteristics of PU specimen may be useful in prediction of lifetime of PU hydraulic reciprocating seal if the allowed degree of wear for failure of the seal is provided.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.4
• /
• pp.337-343
• /
• 2004

This paper presents an experimental study of friction and wear properties of a unidirectional oriented continuous crbon-fiber reinforced epoxy composite at the ambient temperature. Friction and wear experiments were conducted in the three principal sliding direction of the fiber orientation in the composite were selected against the stainless steel counterpart specularly processed were using a pin -on-disc apparatus. Friction coefficient and specific wear rate at various normal loads and sliding velocities wear determined. When sliding took place against smooth and hard counterpart, the hightest were resistance and the lowest friction coefficient were observed in the anti-parallel direction. The wear track of the worn specimens was examined with a scanning electron microscope(SEM) to observe the damaged fibers on the surface. In addition, SEM observations of the worn surfaces allowed to identify the involved different wear mechanisms.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.4
• /
• pp.715-721
• /
• 2003

Dental injuries with crown fracture occur frequently, especially in young patient Reattachment of the crown fragment has been shown to yield good esthetic results in that original tooth anatomy is restored with a material that abrades at a rate indntical to that of the adjacent tooth substance and at the same time permits continual monitoring of pulpal status through the fragment. Case 1 was complicated crown fracture with pin-point bleed ing, that was treated by direct pulp capping with calcium hydroxide and fragment reattachment. Case 2 was in trusive luxation with complicated crown fracture and was treated by pulp treatment and fragment reattachment. Case 3 was uncomplicated crown fracture, and fracture line involved slightly biologic width and treated by reattachment of the crown fragment.

• Preventive Nutrition and Food Science
• /
• v.15 no.3
• /
• pp.229-232
• /
• 2010

Caffeine and catechins from the Yabukita, Yutakamidori, Saemidori, Okumidori, and Fushun varieties of tea leaves picked during different harvesting seasons from April to October were evaluated using HPLC. Total content of catechins increased greatly with the later harvesting time of tea leaves (i.e., picking the leaves in September versus in April) and decreased slightly after September. Yabukita tea leaves picked in August contained 43.1 mg% catechins including EGC, EC, ECG, and EGCG, with the ECGC levels constituting greater than 50% of those four compounds. Yutakamidori and Okumidori varieties picked in September contained the highest catechin values, at 43.6 mg% and 31.0 mg%, respectively. Fushun and Saemidori varieties contained lower catechin concentrations of 14.5 mg% (July) and 11.7 mg% (August) compared to other varieties. The EGCG levels gradually decreased in the late harvesting season, while levels of the other catechins, EC, EGC, and ECG, gradually increased. All varieties of green tea showed a gradual decrease in caffeine content toward the end of our harvesting efforts in October, with levels of 58～68 mg% in April and 28～57 mg% in October. Yabukita, Saemidori, and Okumidori varieties reached their highest caffeine levels in late spring/early summer, with Yabukita and Okumidori varieties reaching a high of 73.4% and 63.5% caffeine, respectively, in May, and Saemidori at 64.0% in June. In particular, Fushun still contained high caffeine of 66.8 mg% (September) during the late harvesting season.

• Journal of Chest Surgery
• /
• v.27 no.5
• /
• pp.345-352
• /
• 1994

We have performed left lung transplantation followed by ligation of right pulmonary artery in 14 dogs at the Chest Disease Research Institute, Yonsei University College of Medicine from May 1992 to February 1994. Excised left lung was perfused with 1500cc of 4$^{\circ}$C cold Euro-Collin`s[E-C] solution at a pressure of 30cmH2O through main pulmonary artery and preserved in 4$^{\circ}$C cold E-C solution for one hour. Left lung transplantation were proceeded in order of left atrium, left main bronchus, left pulmonary artery and right pulmonary artery ligation as usual method. The femoral artery and pulmonary artery pressures were monitored for more than 5 hours after the transplantations in 14 dogs. Six recipient dogs had elevated mean pulmonary artery pressure to greater than 30mmHg after the left lung transplantation and ligation of right pulmonary artery. The cause of elevated mean pulmonary artery pressure was due to inadequate preservation resulting in ischemic damage to donor lungs in 3 cases, and inadequate surgical techniques in 3 cases. Two recipient dogs without surgical complications died immediate post-operatively due to hemorrhagic shock. The bleeding focuses were LA anastomotic site in one case and femoral artery puncture site in another case. The remaining 6 recipient dogs showed mean pulmonary arterial pressure less than 30mmHg. However, one dog had spontaneous pneumothorax in post-operative 4 days, and another dog had rejection phenomenon in post-operative 5 days which was confirmed by pathologic findings of extracted transplanted lung. One dog succumbed of severe hemoptysis which was due to lung abscess with pin point stenosis of bronchial anastomosis in post-operative 38 days. In conclusion, elevated mean pulmonary arterial pressure greater than 30mmHg in immediate postoperative period can be due to inadequate preservation of extracted lung or poor surgical techniques. And the two dogs succumbed of hemorrhagic shock even though the mean pulmonary arterial pressure was less than 30mmHg. It is thought that careful preservation of the extracted donor lung in 4oC E-C solution and complete surgical techniques are the most important factors early and late complications.