• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.2C
• /
• pp.105-111
• /
• 2011

In this paper, we propose a novel Alamouti space-time transmission scheme for orthogonal frequency division multiplexing (OFDM) based asynchronous cooperative communication systems with low relay complexity. The conventional scheme requires an additional operation likes time-reversal at the relay nodes besides the simple multiplications at the relay nodes, which result in increasing the complexity of relay nodes. Unlike the conventional scheme, exploiting the simple combination of the symbols at the source node and the simple multiplications at the relay nodes, the proposed scheme achieves the second order diversity gain by obtaining the Alamouti code structure at the destination node. Simulation results show that the proposed scheme achieves the second order diversity gain and has the same bit error rate performance as the conventional scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5C
• /
• pp.479-486
• /
• 2010

In this paper, we propose a novel low-complexity Alamouti coded orthogonal frequency division multiplexing (OFDM) scheme for asynchronous cooperative communications. Exploiting the combination of OFDM symbols at the source node and simple operations including sign change and complex product at the relay node, the proposed scheme can achieve cooperative diversity gain without use of time-reversion and shifting operations that the conventional scheme proposed by Li and Xia needs. In addition, by using the cyclic prefix (CP) removal and insertion operations at the relay node, the proposed scheme does not suffer from a considerable degradation of bit-error-rate (BER) performance even though perfect timing synchronization is not achieved at the relay node. From the simulation results, it is demonstrated that the BER performance of the proposed scheme is much superior to that of the conventional scheme in the presence of timing synchronization error at the relay node. It is also shown that the proposed scheme obtains two times higher diversity gain compared with the conventional scheme at the cost of half reduction in transmission efficiency.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.1
• /
• pp.10-19
• /
• 1986

This is the last part of the four-part describing the development of a packet-switched computer communication network named the KORNET. In this paper we describe the design and implementation of the packet assembler/dissassembler (PAD) protocol for the asynchronous channel service, and of the network management softwares. The line processing module-B(LPMB) system supporting the asynchronous line includes a PAD protocol, a packet mode DTE/DCE protocol converting to the X.25 protocol, and the asynchronous receiver/transmitter(ART) software. The network management software is operated in master central processing module(MCPM) which includes virtual circuit management (VCM) managing the user channel, the routing management and the high level protocol for communication between the network management center (NMC) and the network node processor(NNP). In this paper, the design, implementation and operation of the softwares for the above service functions will be described in detail.

• Journal of Digital Contents Society
• /
• v.1 no.1
• /
• pp.39-52
• /
• 2000

In this paper, we derive the BER performance of an asynchronous DS/CDMA system and analyze the improvement of BER performance through turbo coding and RAKE receiver in multipath Rayleigh fading and impulsive noise environments. As a result, impulsive noise affects the performance of the system more than multipath fading in lower $E_b/N_o$ than a certain threshold. However, in higher $E_b/N_o$, multipath fading are more dominant than impulsive noise. It is found that in lower $E_b/N_o$, turbo code improves the performance of the system against impulsive noise, and in higher $E_b/N_o$, RAKE receiver improves the performance of the system against multipath fading. Therefore, great improvement can be obtained by employing turbo code and RAKE receiver in multipath Rayleigh fading and impulsive noise environments.

• Convergence Security Journal
• /
• v.21 no.2
• /
• pp.29-35
• /
• 2021

UART (Universal asynchronous receiver/transmitter) is a hardware device that converts data into serial format and transmits it, and is widely used for system diagnosis and debugging in most embedded systems. Hackers can access system memory or firmware by using the functions of UART, and can take over the system by acquiring administrator rights of the system. In this paper, we studied secure UART to protect against hacker attacks through UART. In the proposed scheme, only authorized users using the promised UART communication protocol are allowed to access UART and unauthorized access is not allowed. In addition, data is encrypted and transmitted to prevent protocol analysis through sniffing. The proposed UART technique was implemented in an embedded Linux system and performance evaluation was performed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.2
• /
• pp.221-227
• /
• 2002

In this paper, in order to know the effect of the interference, we have analyzed the BER (Bit Error Rate) performance of the MUD(Multi-User Detector) employing HIC(Hybrid Interference Cancellation) scheme for the asynchronous WCDMA system based on 3GPP(3rd Generation Partnership Project) Spec. through the In this paper, in order to know the effect of the interference, we have analyzed the BER (Bit Error Rate) performance of the MUD(Multi-User Detector) employing HIC(Hybrid Interference Cancellation) scheme for the asynchronous WCDMA system based on 3GPP(3rd Generation Partnership Project) Spec. through the computer simulation. we have assumed Rayleigh fading channel. And we have compared its BER performance with SIC's(Successive Interference Cancellation) and with PIC's(Parallel Interference Cancellation), which are the representative schemes in the subtractive interference cancellation. From the results, it is shown that PlC or HIC is effective for high data-rate users and SIC of HIC for low data-rate users to eliminate the interference. Regardless of the data rate, it is reasonable to use the HIC structure for WCDMA system to satisfy all of users' services. The reason is that the SIC scheme in front of HIC can guarantee the performance of low power users to cancel the serious interference caused by the high power users, while PIC in the rear of it can guarantee the performance of high power users to cancel the interference caused by the low power users.

• Journal of Internet Computing and Services
• /
• v.12 no.1
• /
• pp.27-38
• /
• 2011

In this paper, we propose a multiple access scheme using MHP(Modified Hermite Polynomial) pulse and ternary code for high-data and low-data rate for Out-body WBAN(Wireless Body Area Network). To satisfy the requirement of WBAN system, UWB-IR has been considered as a promising candidate for Out-body WBAN. The proposed multiple access scheme, using orthogonal MHP pulse and ternary code sets, reduces multi-user interference and distinguishes user signal from multi-user signals. We propose two algorithms for synchronous and asynchronous WBAN system. The symbol is constructed by MHP pulses and time hopping duration to reduce multi-user interference in the synchronous WBAN system. The symbol also is constructed by ternary code to avoid collision between pulse trains in the asynchronous WBAN system. The results of the proposed multiple access scheme show a clear improvement of BER.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.4
• /
• pp.7-13
• /
• 2011

In this paper, the IC(Integrated Circuit) for multi-channel synchronous communication was designed by using FPGA and VHDL language. The existing chips for synchronous communication that has been used commercially are composed for one to two channels. Therefore, when communication system with three channels or more is made, the cost becomes high and it becomes complicated for communication system to be realized and also has very little buffer, load that is placed into Microprocessor increases heavily in case of high speed communication or transmission of high-capacity data. The designed IC was improved the function and performance of communication system and reduced costs by designing 8 synchronous communication channels with only one IC, and it has the size of transmitter/receiver buffer with 1024 bytes respectively and consequently high speed communication became possible. It was designed with a communication signal of a form various encoding. To detect errors of communications, the CRC-ITU-T logic and channel MUX logic was designed with hardware logics so that the malfunction can be prevented and errors can be detected more easily and input/output port regarding each communication channel can be used flexibly and consequently the reliability of system was improved. In order to show the performance of designed IC, the test was conducted successfully in Quartus simulation and experiment and the excellence was compared with the 85C3016VSC of ZILOG company that are used widely as chips for synchronous communication.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.31-37
• /
• 2016

Ranging is divided into a synchronous scheme and an asynchronous scheme according to the presence of global synchronization between nodes. In general, the asynchronous ranging is preferred over synchronous ranging because it does not require an expensive high-precision oscillator for the global synchronization. On the other hand, in a conventional asynchronous ranging scheme, the packets, which are generated by all nodes in a positioning system of a large-scale infrastructure and need to be sent for localization by reference nodes, are considerable, which cause an increase in network traffic as the number of nodes increases. The traffic congestion lowers the throughput of the network leading to a considerable loss of energy. To solve this problem, this paper proposes a ranging scheme, in which virtual transmission slots randomly and discretely selected by a plurality of nodes are used to reduce the overheads needed in synchronizing the nodes, and the ranging is performed asynchronously based on the virtual transmission slots, thereby decreasing the network traffic. In addition, a performance test proved that the proposed ranging scheme was stronger than the TWR and SDS-TWR on an error range, even though the intensity of traffic was very low.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5B
• /
• pp.820-829
• /
• 2000

In this paper, DSPA(Dynamic Signalling Period Allocation) algorithm that has been proposed by the authors for MAC(Medium Access Control) protocols in W-ATM(Wireless Asynchronous Transfer Mode) is applied to mixed traffic conditions composed of various service classes. We investigate the bandwidth utilization efficiency and quality of service(QoS) fulfillment by the DSPA algorithm used in W-ATM MAC protocols. Simulation results indicate that the DSPA algorithm significantly increases the throughput of the system with the minimum control overhead. Moreover, QoS of each service class is well satisfied by proper and fair channel allocation to different service classes according to their requirements.