• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.439-442
• /
• 2009

As a result of increasing environmental concern, the penetration of renewable power on power systems is now increasing. Wind energy can be considered as the most economical energy sources to generate electricity without depletion of fossil fuel. The penetration of wind energy from wind farm is getting larger and larger, so we need adequate control strategies for wind farm. To devise adequate control strategies for wind farm, time domain simulation analysis needs to be performed. This presents a Simultaneous Implicit-based time domain simulation algorithm for wind farm with DFAG (Doubly Fed Asynchronous generator) connected to the external power systems. This paper shows an illustrative example with a 5-bus test system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10B
• /
• pp.1760-1768
• /
• 2000

Blind Equalization Method without training sequences is proposed for channel efficiency in mobile communication system for asynchronous multi-user DS-CDMA. the risk of mis-convergence of weak-power users is increased because of small regions of convergence in case of near-far effect in CMA(Constant Modulus Algorithm) which is the simplest has high performance and widely implemented. In despite the problem a equalization using Newton method has higher performance than a conventional method in squared error and eye-pattern.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.6
• /
• pp.1583-1591
• /
• 1998

In this paper, we consider the quasi maximum likelihood(quasi-ML) detector which uses antenna arrays in asynchronous time-varing channels. It is shown that the proposed quasi-ml detector can be regarded as a beamformer followed by a decorrelator: a method based on the eigendecomposition of the correlation matrix of the inverse-filtered signal is proposed to estimate the channel vectors. We also show that the proposed algorithm estimates the channel vector within small mismatch loss in severe propagation environment through computer simulations.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.3
• /
• pp.112-117
• /
• 2020

NAND flash memory is a non-volatile memory that retains stored data even without power supply. Internal memory used as a data storage device and solid-state drive (SSD) is used in portable devices such as smartphones and digital cameras. However, NAND flash memory carries the risk of electric shock, which can cause errors during read/write operations, so use error correction codes to ensure reliability. It efficiently recovers bad block information, which is a defect in NAND flash memory. BBT (Bad Block Table) is configured to manage data to increase stability, and as a result of experimenting with the error correction code algorithm, the bit error rate per page unit of 4Mbytes memory was on average 0ppm, and 100ppm without error correction code. Through the error correction code algorithm, data stability and reliability can be improved.

• ETRI Journal
• /
• v.26 no.5
• /
• pp.413-422
• /
• 2004

This paper investigates the impacts of array weight errors (AWE) in an antenna array (AA) on a parallel interference cancellation (PIC) receiver in uplink synchronous and asynchronous direct sequence code division multiple access (DS-CDMA) systems. The performance degradation due to an AWE, which is approximated by a Gaussian distributed random variable, is estimated as a function of the variance of the AWE. Theoretical analysis, confirmed by simulation, demonstrates the tradeoffs encountered between system parameters such as the number of antennas and the variance of the AWE in terms of the achievable average bit error rate and the user capacity. Numerical results show that the performance of the PIC with the AA in the DS-CDMA uplink is sensitive to the AWE. However, either a larger number of antennas or uplink synchronous transmissions have the potential of reducing the overall sensitivity, and thus improving its performance.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.05a
• /
• pp.493-495
• /
• 2019

제어 분야의 가장 기초적인 시스템인 Rotary Inverted Pendulum 을 제어하기 위하여, 본 논문에서는 강화학습에서 Deep Q-Network 과 함께 대표적인 알고리즘으로 알려진 Asynchronous Advantage Actor-Critic 을 활용하여 다중 디바이스 제어를 설계한다. Deep Q-Network 알고리즘을 활용한 기존 연구와 동일한 방식으로 실 세계의 물리 에이전트와 가상 환경을 맵핑시키며, 스위치를 통하여 로컬 에이전트와 글로벌 네트워크 간 통신을 구성한다. 본 논문에서는 분산 Asynchronous Advantage Actor-Critic 을 이용함으로써 실 세계의 다중 에이전트 제어를 위한 강화 학습의 활용 가능성을 조명한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.427-430
• /
• 2010

MOST Network는 오디오와 비디오 데이터를 실시간으로 전송하는 동기식데이터 영역과 패킷데이터를 전송하는 비동기식 데이터 영역, 네트워크 관리를 위한 명령, 상태, 진단 정보를 전송하는 control Channel로 구성되어 있다. 본 논문에서는 비동기식 데이터 영역과 Control Channel의 데이터를 캡처 및 분석하는 모듈을 설계 및 구현한 후 실제 MOST 네트워크를 구축하여 검증해 보았다. 구현한 시스템을 바탕으로 고가의 장비를 별도로 보유하지 않더라도 MOST Network의 비동기식 데이터 영역과 Control Channel의 데이터를 확인할 수 있으며, 분석이 가능한 시스템을 제안하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.1042-1045
• /
• 2007

본 논문에서는 MAI 제거 기법으로서 다단병렬간섭제거기 (MPIC : Multistage Parallel Interference Canceller) 와 부분 다단병렬간섭제거기 (partial MPIC) 및 다치진폭계수를 이용한 MPIC를 채용한 비동기 (asynchronous) DS-CDMA/M-ary QAM 시스템의 성능 개선을 이론적으로 분석하고 이를 검증하기 위한 컴퓨터 시뮬레이션을 수행하였다.연구결과에서 MPIC, partial MPIC 및 다치진폭계수를 이용한 MPIC를 실제 시스템에 적용하여 구현할 경우 BER 성능, 채널용량 개선, 신호처리 계산량 및 하드웨어 복잡도 사이에 타협 (trade-off) 이 필요하다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.158-163
• /
• 1986

This article surveys techniques and issues related to real time process control system developed for industrial control applications. It covers the system architecture and software engineering issues such as the design of data structures, scheduling of asynchronous task activities, management of shared resources, handling of interrupt and implementing an user friendly man-machine interface. Also problems associated with implementing a real-time system that supports dynamic configuration of data base is addressed.

• Journal of the Korea Society for Simulation
• /
• v.6 no.2
• /
• pp.117-124
• /
• 1997

A simulation model for the estimation of cutoff connection rate in the asynchronous transfer mode (ATM) switching system under multimedia traffic environments is presented. The simulator is developed by the integration of the AweSim tool with user-written C++ routines that model the internal structures of operational details of the switching system. For the case study, the simulator is applied to the ATM switching system developed by Electronics and Telecommunications Research Institute (ETRI) to compare design alternatives according to the cutoff connection rates.