• Journal of Distribution Science
• /
• v.18 no.11
• /
• pp.5-13
• /
• 2020

Purpose: This research investigates the cost behavior of the distribution industry. Specifically, we investigate if the ratio of the increase in costs with an increase in sales is consistent with the ratio of the decrease in costs when sales decrease. Traditionally, cost is assumed to be symmetrical. In the case of the distribution industry, it was expected that the downward rigidity of the cost would be shown because it would be very difficult to decide to adjust resources when sales temporarily decrease. Therefore, studies have looked at Korean capital markets based on manufacturing and steel industries. However, no research has been done on the distribution industry. Research design, data, and methodology: To verify the hypothesis of this study, the asymmetry of cost was measured by Anderson et al. (2003). The sample used 28,695 firm-year data from 2002 to 2019 for the KOSPI and KOSDAQ stock markets. Results: The empirical analysis results are as follows. First, asymmetry of cost was observed in the case of the distribution industry. We confirm cost rigidity when sales decreased. Conclusions. This is the first study to look at cost behavior in the distribution industry, and the downward rigidity of cost in the distribution industry is observed.

• Psychiatry investigation
• /
• v.15 no.12
• /
• pp.1168-1173
• /
• 2018

Objective After the Sewol ferry disaster, bereavement with suicidal ideation was a critical mental health problem that was accompanied by various neuropsychological symptoms. This study examined the frontal alpha asymmetry (FAA), heart rate variability (HRV), and several psychological symptoms in bereaved family members (BFM) after the Sewol ferry disaster. Methods Eighty-three BFM after the Sewol ferry disaster were recruited. We assessed FAA, HRV, and psychological symptoms, including depression, post-traumatic stress, post-traumatic growth factor, anxiety, grief, and positive resources, between BFM with the presence and absence of current suicidal ideation. Results Compared to BFM without suicidal ideation, BFM with suicidal ideation showed a higher FAA with right dominance. Significant differences in psychological symptoms were observed between the groups. In BFM with suicidal ideation, the low: high frequency (LF:HF) ratio correlated with social resources and support. Conclusion The FAA and LF:HF ratio may be biomarkers that represent the pathological conditions of BFM with suicidal ideation. If researched further, they may shed light on the interaction between bereavement with suicidal ideation and social resources for therapeutic intervention.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.4
• /
• pp.298-303
• /
• 2012

$Y_{1-x}VO_4:Eu_x^{3+}$ red phosphors were synthesized with changing the mol ratios of $Eu^{3+}$ ions by using the solid-state reaction method. The crystalline structure of phosphors was found to be a tetragonal system with the maximum diffraction intensity at $25.02^{\circ}$. The grain particles showed the truncated hexagonal patterns with a very homogeneous size distribution at 0.05 mol of $Eu^{3+}$ ion. The excitation spectra of the phosphor ceramics were composed of a broad band centered at 303 nm and weak narrow multilines peaked in the range of 360-420 nm. The dominant emission spectrum was the strong red emission centered at 619 nm due to the $^5D_0{\rightarrow}^7F_2$ electric dipole transition. The experimental results suggest that the optimum doping mol ratio of $Eu^{3+}$ ions for preparing the red phosphors is 0.10 mol with the asymmetry ratio of 5.21.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.23 no.2
• /
• pp.315-322
• /
• 1993

To evaluate of the relationship between the TMJ disorder and the vertical mandibular asymmetry, the author analyzed the differences between condylar heights, ramus heights and mandibular heights of both sides. All measurements were performed with a digital micrometer on the panoramic radiographs of 36 TMJ disorder patients and 30 normal control group. The differences were expressed in millimeters and percentage using the following formula; ｜(R-L)/(R+L)｜×100% The results were as follows : 1. The condylar height difference was greater of in patient group (1.86±1.66㎜) than that of in control group (1.22±0.85㎜)(p<0.05). But there was no significant difference in the condylar height ratio difference between patient group (11.67㎜11.44%) and control group (7.64±621%) (p>0.05). 2. The ramus height difference and ramus height ratio difference of patient group (4.52±3.70㎜, 4.39±3.49%) were greater than those of control group (2.64±2.13㎜, 2.46±2.02%)(p<0.05, p<0.01). 3. The mandibular height difference and mandibular height ratio difference of patient group (4.32±3.52㎜, 3.59±2.81%) were greater than those of control group (2.57±2.46㎜, 2.01±1.95%) (p<0.05). 4. The ratio difference in condylar height to ramus height and condylar height to mandibular height of patient group (5.01±4.13%, 3.36±2.88%) were greater than those of control group (2.33±1.78%, 1.90±1.40%) (p<0.01).

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.6
• /
• pp.576-580
• /
• 2013

We investigate the enhanced effects of asymmetry ratio variations of the source and drain area in silicon (Si) field-effect transistor (FET). Photoresponse according to the variation of asymmetry difference between the width of source and drain are obtained by using the plasmonic terahertz (THz) wave detector simulation based on technology computer-aided design (TCAD) with the quasi-plasma 2DEG model. The simulation results demonstrate the potential of Si FETs with asymmetric source and drain structures as the promising plasmonic THz detectors.

• Imaging Science in Dentistry
• /
• v.34 no.1
• /
• pp.31-34
• /
• 2004

Purpose: To compare the size of the masseter and lateral pterygoid muscle between the affected and the unaffected side of the patients who have the chief complaints of the mandibular asymmetry. Materials and Methods: Twenty two patients (male: 4, female: 18, average age: 21.3 year-old) were radiographed using posterior-anterior (P-A) cephalography and computed tomography (CT). On P-A cephalography, the degree of deviation was determined by the distance from the mentum to the vertical reference line through the crista galli and the anterior nasal spine. On the scanned tracing papers of the maximum cross-sectional area of the masseter and lateral pterygoid muscle using axial CT images, the pixel number was measured. The ratio of the affected : unaffected sides were obtained. For the masseter and lateral pterygoid muscle, the relationship between the muscular volume and degree of skeletal hypoplasia was studied. Results : The half cases showed no skeletal asymmetry. The lateral pterygoid muscle of the affected side was larger significantly than unaffected side (p<0.05). However, there was no significant difference between two sides in the cases of skeletal asymmetry. There was only significant difference in the cases without skeletal asymmetry (p<0.05). Conclusions : To some extent, the slight mandibular hypoplasia could affect the growth of some masticatory muscles.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.4
• /
• pp.450-458
• /
• 2013

The aim of this study was to develop and verify gait training system for post-stroke hemiplegia patients with step length asymmetry. Most post-stroke hemiplegic patients show gait asymmetry and weight shifting training has been suggested as a useful method for improving the walking ability. However, verbal cue by physical therapist may be not effective. Therefore, our weight shift training system was designed to give a feedback to patients through precise plantar pressure and center of pressure (COP) measurement. This weight shifting biofeedback training system is composed of F-Scan plantar pressure measurement system and software development kit (SDK) for Windows operating system. Two post-stroke patients with step length asymmetry were enrolled in this study. After training for six weeks, the weight shift score and step length ratio of two all patients were improved and approached to them of non-disabled. This system developed in this study may improve the step length asymmetry, and therefore this system is also expected to improve a walking ability in hemiplegic patients.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.4
• /
• pp.208-216
• /
• 2020

With the spread of smart manufacturing, one of the key topics of the 4th industrial revolution, manufacturing systems are moving beyond automation to smartization using artificial intelligence. In particular, in the existing automatic machining, a number of machining defects and non-processing occur due to tool damage or severe wear, resulting in a decrease in productivity and an increase in quality defect rates. Therefore, it is important to measure and predict tool life. In this paper, ν-ASVR (ν-Asymmetric Support Vector Regression), which considers the asymmetry of ⲉ-tube and the asymmetry of penalties for data out of ⲉ-tube, was proposed and applied to the tool wear prediction problem. In the case of tool wear, if the predicted value of the tool wear amount is smaller than the actual value (under-estimation), product failure may occur due to tool damage or wear. Therefore, it can be said that ν-ASVR is suitable because it is necessary to overestimate. It is shown that even when adjusting the asymmetry of ⲉ-tube and the asymmetry of penalties for data out of ⲉ-tube, the ratio of the number of data belonging to ⲉ-tube can be adjusted with ν. Experiments are performed to compare the accuracy of various kernel functions such as linear, polynomial. RBF (radialbasis function), sigmoid, The best result isthe use of the RBF kernel in all cases

• ETRI Journal
• /
• v.24 no.2
• /
• pp.109-116
• /
• 2002

We propose a novel very short (< $300{\mu}m$) vertical directional coupler switch with high extinction ratios larger than 30 dB. The device consists of a switching operation induced section (SOIS), an extinction ratio adjusted section (ERAS), and an extinction ratio enhanced section (ERES). These are achieved by changing the refractive index of one core. The switching operation is induced by changing the refractive index of one core in the SOIS. The improvement of extinction ratios larger than 30 dB for both the cross and bar states is made by controlling the asymmetry of the refractive indices of both cores in the ERES. Through the ERAS, different extinction ratios between the cross and bar states at the end of the SOIS are changed to the same value. For this reason, the optimum asymmetry of the refractive indices of the cores for the maximum extinction ratios and the lengths of ERES are the same for cross and bar states. Design guidelines for high extinction ratios with large tolerances are presented.

• The Journal of Korea CHUNA Manual Medicine
• /
• v.5 no.1
• /
• pp.243-249
• /
• 2004

Objectives : This study is to evaluate the effect of flexion-distraction technique by measuring surface EMG in low back pain groups. Methods : 5 low back pain patients' constact time, power, fatigue, recovery of muscle were measured before and after flexion-distraction technique. Results : The asymmetry ratio of surface EMG in low back pain groups were Increased, but decreased after flexion-distraction technique. Conclusions : Surface EMG might be used for evaluating the effect of flexion-distraction technique.