• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.199-206
• /
• 2014

Purpose : According to the rapid increase recently in image-guided radiation therapy, It is necessary to control of the image guidance system completely. In particular for the main subject to the accuracy of image guided radiation therapy device to be done essentially the quality assurance. We made efficient phantom in AMC for the management of the accurate and efficient. Materials and Methods : By setting up of five very important as a quality assurance inventory of the Image guidance system, we made (AMC G-Box) phantom for quality assurance efficient and accurate. Quality assurance list were the Iso-center align, the real measurement, the center align of four direction, the accuracy of table movement and the reproducibility of Hounsfield Unit. The rectangular phantom; acrylic with a thickness of 1 cm to $10cm{\time}10cm{\time}10cm$ was inserted the three materials with different densities respectively for measure the CBCT HU. The phantom was to perform a check of consistency centered by creating a marker that indicates the position of the center fixed. By performing the quality assurance using the phantom of existing, comparing the resulting value to the different resulting value using the AMC G-Box, experiment was analyzed time and problems. Therapy equipment was used Varian device. It was measured twice at 1-week intervals. Results : When implemented quality assurance of an image guidance system using AMC G-Box and a phantom existing has been completed, the quality assurance result is similar in $0.2mm{\pm}0.1$. In the case of the conventional method, it was 45 minutes at 30 minutes. When using AMC G-Box, it takes 20 minutes 15 minutes, and declined to 50% of the time. Conclusion : The consistency and accurate of image guidance system tend to decline using device. Therefore, We need to perform thoroughly on the quality assurance related. It needs to be checked daily to consistency check especially. When using the AMC G-Box, It is possible to enhance the accuracy of the patient care and equipment efficiently performing accurate quality assurance.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.5
• /
• pp.760-771
• /
• 2000

The main objective of this study were to develop the scale for measuring service quality and to identify the differences of service quality among apparel store types(department store, fashion specialty store and national brand independent store). Data were collected from 463 subjects who finished their shopping with a self-administered questionnaire. The results were as follows; 1. As a result of factor analysis, seven dimensions were identified for service quality: VMD, store atmosphere, pleasant enviornment, product assortment, store policy, salesperson's assurance, and salesperson's responsiveness dimensions. The first five dimensions and the last two dimensions were corresponded to store service and sales service respectively. Those dimensions explained 56.56% of service quality. Especially the salesperson's assurance had the most explaining power. 2. The fashion specially store was evaluated as the highest in five dimensions of store service, whereas the department store was evaluated as the lowest in the pleasant environment dimension. 3. Store policy, salesperson's assurance, store atmosphere, and VMD dimensions explained 38% of store satisfaction.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.27-37
• /
• 2011

Currently, in the course of introducing rolling stocks, RAMS standard and management by system engineering method apply to rolling stock system. Technical elements and results applied in system introduction phase are just used in acquisition stage, and these are not applied to the standard in railway site. Therefore, it is difficult to apply to standardized technology and quality assurance measure. Due to the establishment of the EU, railway operation system is internationalized and the international railway standards are being discussed in various ways. In addition, standardization is expanded from manufacture to operation and maintenance. It is to provide consistent standard in quality, cost calculation of maintenance technology, maintenance technology and quality assurance in case of international railway safety incidents. Therefore, this study is to find technology, quality and cost management model to be used for choosing railway-operation guidance by considering how technologies & quality have changed in system life cycle, compared with estimated standards, based on the technologies & quality-related result in the process of getting new rolling stocks and management guidance for operation & maintenance process.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.2
• /
• pp.108-117
• /
• 1998

Testing and evaluation was carried out to certify quality assurance of localized engine parts using accelerated mission test method, which has been used to verify qualification or substantiation of the developed engine, improved engine components and engineering changed parts since 1976. Because AMT is not a familiarized testing for quality assurance of engine and localized engine parts in korea, through this testing and evaluation, it is presented the concepts, test procedures and evaluation method of AMT and is proposed the possibility of execution AMT, as a tool for qualification or substantiation test of a development engine or components.

• Journal of Korean Society for Quality Management
• /
• v.23 no.1
• /
• pp.74-94
• /
• 1995

Through the application of Quality Assurance(QA) techniques in R&D activities, we can approach for cost reduction and productivity improvement with high reliability. Application of QA systems in R&D in developed countries were studied, a enquete survey was performed to investigate researcher's understanding of QA in R&D. As a result of this study, it is considered desirable that QA system be applied partially to the feasible work areas at first, and the scope of application be enlarged to extended areas, later. For these aims, various and feasible QA system should be developed and established. As the need for quality assurance in R&D is expected to be increased continuously in the future, it is imperative for us to be prepared for the application of QA system in R&D activities.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.41
• /
• pp.167-175
• /
• 1997

This study is concerned with Quality Maintenance System in Total Productive Maintenance. The important factor in manufacturing process is to attain the uniformity of quality Also quality assurance system is defined such as manufacturing process and products. In this paper, the design of quality maintenance system is considered to manufacturing process elements. Especially the manufacturing process is oriented to machinery equipments, repair and maintenance system is wide principal factor. And quality in manufacturing field is influenced by equipment maintenance system. So in the article, maintenance system for quality is given in a view of quality assurance. And the analysis of Physical Mechanism is explored in real field example.

• Journal of Korea Association of Health Promotion
• /
• v.4 no.1
• /
• pp.60-67
• /
• 2006

Purpose : Asian Quality Assurance Survey program(AQuAS) is and activity of Asian Network for Clinical Laboratory Standardization and Harmonization(ANCLS) which had begun her first colloquium in 1999 in Jakarta, Indonesia by laboratory physicians led by Professors Noriyuki Tatsumi and Yoshinori Funahara with themes of standardization and harmonization of clinical laboratories in Asia. Methods : AQuAS had begun its first survey in July. 2001 and done November and March, three times per year in the fields of Chemistry, Hematology. Coagulation and Urinalysis. As of June 2006 the 15th survey have been completed. Korean Association of Health Promotion(KAHP) had participated in it since July, 2004 in the fields of chemistry, hematology and urinalysis.ゝ⨀

• Proceedings of the KWS Conference
• /
• 1998.10a
• /
• pp.129-132
• /
• 1998

The dynamic resistance monitoring in primary circuit or T/C is one of the important issues in that in-process and real time quality assurance of resistance spot weld is needed to increase the product reliability. It is well known that tile dynamic resistance curve gives us very useful information about nugget growth and weldability. In the present paper, a new dynamic resistance detecting method is presented as a practical manner of weld quality assurance using instantaneous current and voltage measured by primary circuit. Primary dynamic resistance patterns are basically similar to those of the secondary, but there is evident advantage such as no extra devices are needed to obtain the quality assurance index and eventually feedback control will be possible caused by T/C based monitoring system.

• Proceedings of the KWS Conference
• /
• 1999.10a
• /
• pp.142-145
• /
• 1999

The dynamic resistance monitoring is one of the important issues in that in-process and real time quality assurance of resistance spot weld is needed to increase the product reliability. Secondary dynamic resistance patterns, as a real manner, are hard to adapt those factors in real time and in-plant system. In the present study, a new dynamic resistance detecting method is presented as a practical manner of weld quality assurance at the primary circuit. By the correlation analysis, it is found that the primary dynamic resistance patterns are basically similar to those of the secondary. Various dynamic resistance indices are characterized with the primary curve. And quality of the weld, like the tensile shear strength, is estimated using adaptive neuro-fuzzy estimation system which is consisted of the Sugeno fuzzy algorithm. Through the fuzzy clustering and parameter optimization, real time weld quality assurance system with less efforts is proposed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.10a
• /
• pp.585-592
• /
• 2006

Recently, many high rise buildings is planning and under construction over the world. The drilled shafts as a foundation of high rise buildings are often adopted fur the purpose of construction safety and construction cost effectiveness. It is common that the capacity of drilled shafts is beyond conventional conception. The reasonable design and quality assurance for the drilled shaft as foundation of high rise building become much more important since the drilled shafts should bear much higher working load. This paper reviews state of the art of the design and quality assurance for the drilled shafts as foundation of high rise buildings. And also some related suggestions are given in this paper.