• 대한조선학회논문집
• /
• 제42권4호
• /
• pp.396-401
• /
• 2005

In this study, the assumed mode method using characteristic polynomials of Timoshenko beam is applied to the free vibration analysis for the stiffened plate of ship tank side in contact with water. The hydro-elastic effect of the fluid-structure interaction is considered by fluid velocity potential, derived from boundary conditions for fluid and structure, and utilized in the calculation of added mass matrix using assumed modes. To verify the validity and effectiveness of the presented method, free vibration analysis for the stiffened plates in contact with finite and infinite fluids have been carried out and its results were compared with those obtained by a general purpose FEA software.

• 대한조선학회논문집
• /
• 제35권4호
• /
• pp.76-86
• /
• 1998

본 연구에서는 보강재와 구조부재의 내부손실이 진동에너지 흐름에 미치는 영향을 파악하기 위하여 assumed mode method와 모드해석기법을 이용하여 점 가진된 평판과 보강판에 대한 진동인텐시티 해석을 수행하였다. 이때, 중첩모드수에 따른 진동인텐시티 해석 결과의 수렴성과 기진원으로부터 입력되는 파워를 진동인텐시티로 추정할 경우의 정확도에 대해서도 검토하였다. 일련의 수치해석 결과로부터 중첩모드수가 충분할 경우 진동인텐시티를 이용하여 추정한 기진원의 입력파워는 5%이내의 오차를 나타내고, 면외 기진력을 받는 판 구조물의 진동에너지는 전단력 성분에 의해서 지배적으로 전달됨을 확인하였다. 아울러, 구조부재의 내부손실 효과와 보강재의 진동에너지 흐름 차단 효과는 저차 공진주파수에서는 작고, 고차 공진주파수 및 비공진 주파수 영역에서 큼을 확인하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권3호
• /
• pp.267-280
• /
• 2012

An approximate method based on an assumed mode method has been presented for the free vibration analysis of a rectangular plate with arbitrary edge constraints. In the presented method, natural frequencies and their mode shapes of the plate are calculated by solving an eigenvalue problem of a multi-degree-of-freedom system matrix equation derived by using Lagrange's equations of motion. Characteristic orthogonal polynomials having the property of Timoshenko beam functions which satisfies edge constraints corresponding to those of the objective plate are used. In order to examine the accuracy of the proposed method, numerical examples of the rectangular plates with various thicknesses and edge constraints have been presented. The results have shown good agreement with those of other methods such as an analytic solution, an approximate solution, and a finite element analysis.

• 대한조선학회논문집
• /
• 제32권3호
• /
• pp.116-125
• /
• 1995

선체(船體) 해양구조물(海洋構造物)과 같은 대형(大型) 구조물(構造物)은 대부분 판(板) 구조물(構造物)로 이루어져 있으며, 이에 각종(各種) 기기류(機器類), cable류(類). Pillar, 탄성지지(彈性支待)된 장비(裝備) 등과 같이 집중질량(集中質量), 분포질량(分布質量), 지지(支持)스프링 , 질량(質量)-스프링 계(系) 등이 부가(附加)되는 경우가 많다. 이러한 판(板) 구조물(構造物)의 진동해석(振動解析) 방법(方法)으로 매우 단순(單純)한 경우를 제외하고는 엄밀해(嚴密解)를 얻기 어렵기 때문에 Rayleigh-Ritz방법(方法), assumed mode method와 같은 해석적(解析的) 방법(方法)이 주로 적용(適用)되고 있다. 국부(局部) 팬널의 형상(形狀)은 직사각형(直四角形) 뿐만 아니라 사다리꼴, 삼각형(三角形) 등 매우 다양(多樣)한데 상기(上記) 해석적(解析的) 방법(方法)을 적용한 연구(硏究)는 대부분 직사각형(直四角形)인 경우에 대하여 이루어졌다. 따라서 본(本) 연구(硏究)에서는 임의(任意) 사각형(四角形) 형상(形狀) 평판(平板)에 집중질량(集中質量), Pillar와 같은 지지(支持)스프링, 질량(質量)-스프링 계(系) 등이 부가(附加)된 전체계(全體系)의 진동해석(振動解析)을 효율적(效率的)으로 수행(遂行)하는 방법으로서 임의(任意) 사각형(四角形) 형상(形狀)을 효과적(效果的)으로 취급하기 위해 특성좌표계(特性座標系)를 활용하고 assumed mode method을 적용하는 정식화(定式化)를 제시하였다. 질량(質量)-스프링 계(系)가 부가(附加)된 사다리꼴 평판(平板)을 대상(對象)으로 일련의 수치(數値) 계산(計算)을 수행(遂行)하고 유한요소법(有限要素法)에 의한 결과(結果)와 비교(比較) 검토(檢討)하므로써 본(本) 연구(硏究)에서 제시한 방법(方法)의 타당성(妥當性)을 입증하였다.

• 소음진동
• /
• 제11권1호
• /
• pp.111-117
• /
• 2001

Present work deals with a study on the deployment or retraction of cantilever beam that includes the rigid-body motion of large displacement of beam through the translational and rotational motions in 2-dimensional plane. The equations of motion are derived with respect to non-Cartesian coordinate system. In the formulation of equations of motion, shear deformations and geometrically non-linear effect are included. An assumed mode method is applied and numerical convergence characteristics are studied also. Types of motion of the moving beam are assumed to be classified as‘slow’or‘fast’motion, and the dynamic characteristics are investigated.

• 한국해양공학회지
• /
• 제26권4호
• /
• pp.42-49
• /
• 2012

A numerical method is presented for an out-of-plane structural intensity analysis of rectangular thick plates with arbitrary elastic edge constraints. The method adapts an assumed mode method based on Timoshenko beam functions to obtain the velocities and internal forces needed for a structural intensity analysis. To verify the presented method, the structural intensity of a square thick plate under harmonic force excitation, for which four edges are simply supported, is analyzed, and the result is compared with existing solutions using the assumed mode method based on trigonometric functions. In addition, numerical analyses are carried out for a rectangular-shaped thick plate under harmonic force excitations, of which three edges are simply supported and one edge utilizes an arbitrary elastic edge constraint. These numerical examples show the good accuracy and applicability of the presented method for rectangular thick plates with arbitrary edge constraints.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권3호
• /
• pp.478-491
• /
• 2013

Natural vibration analysis of plates with openings of different shape represents an important issue in naval architecture and ocean engineering applications. In this paper, a procedure for vibration analysis of plates with openings and arbitrary edge constraints is presented. It is based on the assumed mode method, where natural frequencies and modes are determined by solving an eigenvalue problem of a multi-degree-of-freedom system matrix equation derived by using Lagrange's equations of motion. The presented solution represents an extension of a procedure for natural vibration analysis of rectangular plates without openings, which has been recently presented in the literature. The effect of an opening is taken into account in an intuitive way, i.e. by subtracting its energy from the total plate energy without opening. Illustrative numerical examples include dynamic analysis of rectangular plates with rectangular, elliptic, circular as well as oval openings with various plate thicknesses and different combinations of boundary conditions. The results are compared with those obtained by the finite element method (FEM) as well as those available in the relevant literature, and very good agreement is achieved.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.96-100
• /
• 2008

In this paper, a experimental and theoretical study is carried out on the hydroelastic vibration for a rectangular bottom and side plate of tank. It is assumed that the tank wall is clamped along the plate edges. The fluid velocity potential is used for the simulation of fluid domain and to obtain the added mass due to plate vibration. It is assumed that the fluid is imcompressible and inviscid. Assumed mode method is utilized to the plate model and hydrodynamic force is obtained by the proposed approach. The coupled natural frequencies are obtained from the relationship between kinetic energies of a wall including fluid and the potential energy of the wall. The theoretical result is compared with the three-dimensional finite element method. In order to verify the result, modal test was carried out for bottom/side plate of tank model by using impact hammer. It was found the fundamental natural frequency of bottom plate is lower than that of side plate of tank and theoretical result was in good agreement with that of commercial three-dimensional finite element program.

• 한국소음진동공학회논문집
• /
• 제24권12호
• /
• pp.948-953
• /
• 2014

Many studies using the assumed mode method have been found for the free vibration analysis of stiffened plate with known elastic boundary conditions. However many local structures such as tank edges and equipment foundations consist of connected structures and it is very difficult to find suitable elastic boundary conditions. In this study combined polynomials which satisfy simply and fixedly supported boundary conditions are proposed. The proposed method has been applied to tanks which bounded by bulkhead and a deck. The results of this study shows good agreements with these obtain by the FEA S/W(Patran/Nastran).

• 한국항공우주학회지
• /
• 제35권11호
• /
• pp.1028-1035
• /
• 2007

논문에서는 시험선인 소형 위그선의 주날개 구조를 엔진 및 프로펠러에 의해 유발되는 진동을 가진력으로 하여 강제진동 해석을 수행하였다. 대상 위그선은 2행정의 왕복엔진을 날개에 장착하여 프로펠러에 의한 추력으로 비행하며, 미는 형식(Pusher Type)의 엔진 배열을 취하고 있다. 유한요소해석을 위해서 구조해석 상용프로그램인 MSC/NASTRAN을 사용하였으며, 엔진의 주요 진동 특성인 H-mode 와 V-mode 그리고 X-mode를 특정 가진 주파수로 하여 주파수 응답 해석을 수행하였고, 엔진의 횡방향 진동 모드인 L-mode를 프로펠러의 회전에 의해 진동을 수반하는 가진 추력으로 가정하여 과도응답 해석을 수행한 후 날개의 진동 특성을 살펴보았다.