• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.4 no.1
• /
• pp.23-28
• /
• 2010

Case of patients with weakness in cardiopulmonary system, other ambulatory function is normal, but oxygen supply function is problem. So they need reduce energy consumption for gait by assistance system. In this study, we designed and developed walking assistant device which helps flexion and extension of hip joint for cardiopulmonary patients. There are two motors, each at the left and right side of pelvis, providing torque to the hip joint. The target angle of the flexion and extension in the hip joint is set according to the normal gait. As a result, reduction of energy consumption was 14.8% by gait assistive device.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.1 no.1
• /
• pp.7-11
• /
• 2007

A compass device which indicates the right direction using the recorded voice was developed to assist the people who are blind when they are walking and moving to somewhere. The developed voice compass consists of a sensing module which recognizes the terrestrial magnetism with magnetic sensor, voice recorder IC, speaker and microprocessor which controlled all the components. It has 32 directions resolution and can continuously indicates the progressing direction with established time interval for the user convenience. It can help walking of the blind people and designed to be used in various sports and leisure. The performance of the developed device was verified by experiment with person who are blind.

• The Magazine of the IEIE
• /
• v.32 no.3 s.250
• /
• pp.70-85
• /
• 2005

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.11 no.4
• /
• pp.349-354
• /
• 2017

In this study, we proposed a design guideline of height-adjustable wash basin which is an assistive product for personal hygiene for persons with disability. We performed biomechanical assessments using both of conventional and prototype height adjustable wash basin. Total five elderly subjects (all male, age $68.6{\pm}4.3yrs.$, height $169.8{\pm}5.7cm$, weight $70{\pm}7.7kg$) participated for the assessment test. Each joint angles were measured by using a 3D motion capture system when subjects use wash basins, and the lumbar moment of each subjects was estimated based on a human body model. From the assessment results, a design guideline which has the range of the height from 652[mm] to 1162[mm] was proposed. Then additional assessment tests with five healthy subjects ($25.8{\pm}1.8yrs.$, $175.5{\pm}5.8cm$, $74{\pm}15.7kg$) were performed in order to verify effectiveness of the design guideline. The results showed a height-adjustable wash basin applied the proposed design guideline was effective to reduce the lumbar moment.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.10 no.4
• /
• pp.321-328
• /
• 2016

In this paper, we propose a walk status method which can be fused with conventional walk intention method to improve convenience of an electric assistive walking system for elder people with restricted walking capabilities. The system uses a handlebar as a trigger and regards grabbing a handlebar as expressing will to walk. And the system uses a user's linear velocity and angular velocity as linear velocity and angular velocity of a system, checked by laser range finder. To achieve this, we propose a method to find a virtual central point of a human body by estimating a central point between two legs. The experiments are carried out by comparing user's linear velocity and angular velocity, and system's linear velocity and angular velocity. The results show that the error of linear velocity and angular velocity between a user and a system are 1% and 2.77%, which means the linear velocity and angular velocity of a user can be applied to a system. And it is confirmed that the proposed fusion method can prevent a user from being dragged by an assistive walking system or a malfunction caused by lack of experience

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.7
• /
• pp.799-807
• /
• 2014

This paper describes the development of an indoor locomotion assistive robot, Ball-Chair, comprising a novel drive system. This robot facilitates locomotion assistive operation in narrow spaces, in which common wheelchairs cannot move easily. The Ball-Chair has two main features: its structural feature and driving mechanism. The exoskeleton frames of the Ball-Chair have been designed with octagonal shapes resembling a circle, for minimizing its volume and weight. Additionally, all its driving parts (including the ball) are mounted within of the robot to enhance its safety. The Ball-Chair features a reverse ball-mouse driving mechanism comprising two driving omni-wheels in the x- and y-axes. By controlling the speed of each omni-wheel, a holonomic driving system that can facilitate omnidirectional locomotion has been achieved using only two wheels. The effective movement of the Ball-Chair in any direction within narrow indoor spaces was experimentally verified. The paper outlines the development procedure in detail.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.4 s.316
• /
• pp.8-14
• /
• 2007

Social participation of the elderly and people with disabilities continuously becomes more active due to improvement of social systems and technological development. Various assistive systems, such as intelligence robots and intelligence home systems, have been developed to support the social participation, and obviously contributed to independent lives of the elderly and people with disabilities. These systems, however, usually require expensive special hardware. To relieve a financial burden software-oriented approaches, which utilizes existing hardware such as laptops, can be an alternative. The software should be developed considering users with physical limitation and without much knowledge of computers. This paper suggests software-oriented approaches to solve these problems and describes an actual development procedure of the software with related theories. We also introduce an unified user interface for a special work chair as a real application.

• Journal of Appropriate Technology
• /
• v.6 no.2
• /
• pp.146-150
• /
• 2020

Assistive technologies for people with disabilities are often marginalized in the Fourth Industrial Revolution. In this paper, we intend to present the possibility of acquiring tactile information through the tactile display adapting an electromagnetic actuator. The multi-layered display designed for tactile communication has innovatively narrowed the size and spacing of cells in order to express pictures, maps, and graphics. This display has enabled the visually impaired to touch two-dimensional information combining with other assistive technologies so that. It would also provide a technical source of access to STEM education (Science, Technology, Engineering, and Mathematics) so that students will perform better and be better prepared for advanced education. Moreover, it can be applied to public infrastructure and transportation in smart-city projects on the globe. Hence, this paper introduces the principle of Electromagnetic-actuator and how it can be utilized in many diverse areas.

• Korean Journal of Audiology
• /
• v.18 no.3
• /
• pp.105-111
• /
• 2014

Assistive listening devices (ALDs) refer to various types of amplification equipment designed to improve the communication of individuals with hard of hearing to enhance the accessibility to speech signal when individual hearing instruments are not sufficient. There are many types of ALDs to overcome a triangle of speech to noise ratio (SNR) problems, noise, distance, and reverberation. ALDs vary in their internal electronic mechanisms ranging from simple hard-wire microphone-amplifier units to more sophisticated broadcasting systems. They usually use microphones to capture an audio source and broadcast it wirelessly over a frequency modulation (FM), infra-red, induction loop, or other transmission techniques. The seven types of ALDs are introduced including hardwire devices, FM sound system, infra-red sound system, induction loop system, telephone listening devices, television, and alert/alarm system. Further development of digital wireless technology in hearing instruments will make possible direct communication with ALDs without any accessories in the near future. There are two technology solutions for digital wireless hearing instruments improving SNR and convenience. One is near-field magnetic induction combined with Bluetooth radio frequency (RF) transmission or proprietary RF transmission and the other is proprietary RF transmission alone. Recently launched digital wireless hearing aid applying this new technology can communicate from the hearing instrument to personal computer, phones, Wi-Fi, alert systems, and ALDs via iPhone, iPad, and iPod. However, it comes with its own iOS application offering a range of features but there is no option for Android users as of this moment.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.3
• /
• pp.85-96
• /
• 2023

This study developed and evaluated a safe route guidance service for electric personal assistive mobility device used mainly by the mobility impaired people to improve their mobility. Thirteen underlying factors affecting the mobility of electric personal assistive mobility device have been derived through a survey with the mobility impaired people and employees in related organizations in Busan Metropolitan City. After assigning safety scores to individual factors and identifying the relevant factors along routes of interest with an object detection AI model, the safe route for electric personal assistive mobility device was provided through an optimal path-finding algorithm. As a result of comparing the general route of T-map and the recommended route of this study for the identical routes, the latter had relatively fewer obstacles and the gentler slope than the former, implicating that the recommended route is safer than the general one. As future works, it is necessary to enhance the function of a route guidance service based on the real-time location of users and to conduct spot investigations to evaluate and verify its social acceptability.