• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1621-1621
• /
• 2001

The quality of sugarcane grown on the NE Australian tropical coast ($16^{\circ}$15'- $18^{\circ}$15' S Lat.) has declined markedly in the past seven years. This has been linked to dilution of mill-supply cane with increasing levels of non mature-stalk material consisting of leaves and sucker culms. The prime research objective was to examine the transition from the pre-harvest, in-field crop to harvested material sent for processing, in terms of quality and crop fraction proportions. A secondary objective was to quantify the effects of preharvest-season crop habit and culm condition on crop quality. Ten quadrat samples from each of 54 random crop sites (17 in 1999 and 37 in 2000), covering a wide range of variables (cultivar, crop class, and edaphic, topographic, climatic, and temporal factors) were collected immediately before harvest. Samples were partitioned into four fractions:- sound and unsound mature stalks (culms), sucker culms, and extraneous matter (leaves). Material harvested from each site was sampled and partitioned into four fractions:- sound and unsound billets (culm pieces), culm-spindle pieces, and leaf. In 2000, before harvest, 14 additional sites were sampled monthly, on three occasions, from March - June. Erect and non-erect culms were divided into sound and unsound classes. All samples were disintegrated and presented to a remote reflectance module of a scanning spectrophotometer using the BSES large cassette module. Near infra-red spectroscopic (NIS) analyses were developed for the rapid determination of quality components (Brix, commercial cane sugar (CCS), fibre, moisture, and polariscope reading). Calibrations for three material groups (culm (n = 639), non-culm (n = 496), and combined) were developed for all components using the 1999 data set. Two sub-sets (n = 178, and 190) of about 10% of the preharvest-season and harvest populations scanned in 2000 also were subjected to full routine laboratory analyses. The 1999 combined calibrations were excellent, but the culm calibrations produced consistently lower standard errors. Non-culm calibrations were marginally better than the combined for only CCS and pol. reading. Analysis of the 2000 culm data with calibrations using all 1999 and 2000 culm data resulted in better predictions relative to the 1999 culm calibrations. This also was true for the combined calibrations. Assessment of quality components in pre- and post-harvest sugarcane using NIS calibrations was more cost effective than using routine laboratory techniques. Outcomes from this NIS-facilitated research will have important economic consequences for the Australian sugarcane industry. Potential CCS present in mature culms is being discounted by dilution with leaves and sucker culms, threatening farm viability. The results question the efficacy of current harvesting technology. The CCS of harvested cane is improved only marginally over that of the in-field crop. Current harvesting technology requires either supplementary, innovative pre-mill processing or a design revolution to improve mill-supply cane quality, and therefore whole of industry economics. NIS-facilitated analyses, before the harvest season, highlighted the benefits of growing erect, sound crops. Loss of CCS then, can be minimized only by a combination of crop improvement and agronomic solutions, applied as part of sound on-farm management.

• Korean Journal of Digital Imaging in Medicine
• /
• v.11 no.1
• /
• pp.27-33
• /
• 2009

In this study, we compared the alteration of test positions according to various test equipments when testing shoulder joint superoinferior axial to estimate the clinical usefulness of tiltable standing detector. Our objectives were patients who visited our hospital. Among them we chose patients who were prescribed to get a shoulder axial test, again we selected 30 patients whose abduction is more than 90 degree.(2008. Nov.$\sim$2009 Jan.) With the patients cooperation, we used CR(Agfa, Belgium), fixed-detector(Canon, japan), Tiltable-detector(Philips, Netherlands). Tested with only one equipment(tiltable detector), and posed with the other two. We surveyed 5 inspectors and 30 patients, asking them to rate the convenience of test position. Also, we checked how long it takes to have the image appear on screen after testing with the equipment We provided a standard for an assessment of the image to an expert in bone radiology, an orthopedist and a radiologist with 5 years experience. When the patients were asked about the convenience of the equipments, 15 people(50%) answered CR is convenient and 14 people(46.7%) answered the Tilting detector is convenient, showing not much difference. However, when the inspectors were asked the same question, 4people(80%) out of 5 answered that the Tilting detector is more convenient The time test showed that CR takes 2 minutes and 50 seconds, the Fixed detector 1minute and 48 seconds andor had no distortion showing the shoulder joint space. However, even though the Fixed detector showed ac the Tilting detector takes 1 minute and 43 seconds to bring the image to the screen after the position. The results of the value of image taken by each equipment, CR and the Tilting detectromion, coracoid process, due to the unstable pose, they were quite distorted and scored poor in observing glenoid fossa. By this study, we can see that testing the shoulder joint superoinferior axial projection with a detector that has a tilting device would be more convenient than testing it with a CR.

• Journal of Korean Academy of Nursing
• /
• v.26 no.1
• /
• pp.73-93
• /
• 1996

This study aimed to analyse the test contents of the national examination for the registered nurses (NERN) over 3 years from 1991 to 1993 in Korea. In recent years in Korea, the MCQ(multiple choice question) has been showing to be a highly recognized method for assessing the qualification of registered nurses. Unfortunately, nursing faculties have found NERN had some bad MCQs through having evaluation workshop for Some MCQs often provide so many unwriting clues which become a bias of the results, and some items fell into the category of the lower level of educational taxonomy such as isolated recall a fact or data. Frequently the stems of the questions are ambigous, unclear, disputable, esoterical or trivial. Considering those fallacies of the national examination, it is very critical to review the test items to see whether it is of high quality, is more fair, reliable and objective in depth. Therefore, this study was done to provide data for the improvement of the test contents as well as the teachers's assessment skill. For this study, the ad hoc committee was composed of 16 members, including 5 education board members of Korean Academic Nurses Association and 11 nursing faculty members. This committee had one day panel discussion and filled the checklist for this study. The process of analysing data was held over 10 times during 1992-1994. The analysis focussed on educational taxonomy such as cognitive domain(knowledge), psychmotor domain (skill), affective domain(attitude) and the level of learning such as recall, understanding, problems solving, and learning area of theory and practice, and the learning content categorised by nursing process and disease process. The test analysed using difficulty index and the structure of the test items was analysed. The conclusions and suggestion as follows : 1. In learning area, the average ratio of the theory and practice was 1 : 1.1 which was less than 1 : 2 suggested by Korean National Health Institute, and the ratio was different by the 8 leaning subjects of nursing. 2. In category of the educational taxonomy, the knowledge domain was emphasized mostly（79. 7％）, the skill domain was 14.9％, and the attitude domain was 5.4％ only. 3. In the level of learning, generally, the test items of the level of recall（45.5％） and the understanding（46.3％） were covered almost and the problem solving was 8.1％. 4. In the learning contents, generally, the test items related to nursing process was 67.2％ and that of disease process was 32.8％. However, this proportion was different by the 8 leaning subjects. Even though the nursing diagnosis has been emphasized in nursing curricula recently, the test items of this was identified very few. 5. In the structure of the test item, some were not clear, incorrect grammar, unclear description and some have clues to answer. 6. In the item analysis, the non-acceptable level of the difficulty index (means too easy) was 65.7％, and the acceptable level was 33.9％. Considering the results we would like to suggest the followings, 1. Since the test items of knowledge domain was dominant, the test items of the practice domain and attitude domain should be emphasized more. 2. The regular review and analysis of NERN should be arranged in order to improve the quality of the test items which will give influence to the nursing education positively.

• Journal of The Korean Association For Science Education
• /
• v.34 no.7
• /
• pp.647-655
• /
• 2014

The purpose of this study is to acquire teaching insights for improving scientific literacy by analyzing the effects of scientific communication skills, science process skills, and logical thinking skills of elementary school students on academic achievement level. The participants are 64, sixth grade elementary school students. Survey materials include the results of Scientific Communication Skill Test (SCST), Test of Science Process Skills (TSPS), Group Assessment of Logical Thinking (GALT), multiple choice test & short answer test, descriptive answer test on science, and academic achievement level test on all subjects. Based on these data, the study analyzed the relationships of science process skills, logical thinking skills, and scientific communication skills, and each category's effect on academic achievement level. Furthermore, under the assumption that scientific communication skills are affected by science process skills and logical thinking skills and directly influence the academic level, the research discovered three types of correlations as a structural model. The results show that there are considerable correlations in scientific communication skills, science process skills, and logical thinking skills. Also, these three abilities have meaningful correlations with learner's writing and descriptive question level on science curriculum and overall academic achievement level; the level of correlation differ a bit by subcategory factors. In conclusion, setting the model, science process skills and logical thinking skills influence scientific communication skill, and the skill directly influences the learner's academic level. Further analysis of the results show that scientific communication skill influences the academic achievement level of all subjects the most.

• Journal of Oral Medicine and Pain
• /
• v.26 no.4
• /
• pp.331-343
• /
• 2001

Advances in medical procedures and utilization of medication have resulted in expanding aged population, which leads to increased aged patients with salivary hypofunction and its associated symptoms in dental clinic. The purpose of this study was to investigate clinical characteristics of patients with dry mouth and its correlation with their salivary flow rate. Forty dry mouth patients (7 males, 33 females, mean age 42.0 years) whose flow rate of unstimulated whole saliva was less than 0.15 ml/min were included and their gender- and age-matched controls (7 males, 33 females, mean age 42.9 years) who did not report any complaints, suggestive of salivary gland dysfunction and had the flow rate of greater than 0.20 ml/min were included for comparison. The salivary flow rate was measured in both unstimulated and stimulated conditions. Dry mouth-related clinical information including history, dry mouth associated symptoms, exacerbating and relieving factors, drugs, systemic diseases, and family history was investigated using questionnaires. The differences in distribution of patients and control subjects to each question and their relation to the salivary flow rate were analyzed and we came to following conclusions. 1. There were statistically significant differences in the distribution of patients and controls to the following questions: the period and frequency of suffering from dry mouth; severity of dry feeling during a meal; severity of discomfort during swallowing; necessity of sipping liquids during swallowing dry foods, severity of discomfort in usual life due to dry feeling; self-assessment of residual salivary volume; taking medications. 2. The patients had more stress-related medical histories including indigestion, insomnia, and gastritis compared with controls. The patients took many kinds of medications to control their systemic diseases. 3. There were statistically significant differences in the salivary flow rate between different groups of patients to following questions: severity of dry feeling during a meal; severity of discomfort during swallowing; necessity of sipping liquids during swallowing dry foods. The difference was more significant in the case of stimulated salivary flow rate rather than unstimulated one. 4. The salivary flow rate of patients taking medications was significantly less than that of patients who did not take medications. The difference was more significant in the case of stimulated salivary flow rate rather than unstimulated one.

• Journal of Distribution Science
• /
• v.14 no.6
• /
• pp.107-118
• /
• 2016

Purpose - Over 90% of Domestic logistics industry is small enterprise and they are experiencing growth stagnation due to price-based competition structure rather than constructing logistics service of high added value. In order to get over this situation and pursue the development of logistics industry, strengthening its competitiveness, through inter-enterprise cooperative network build-up, would be a key alternative. Therefore, in this study, an index for measuring inter-enterprise cooperation level of Joint logistics business will be developed as a typical collaborative business model in logistics industry. Moreover, a strengthening competitiveness method suggests a developmental step and a key management index to mature in logistics industry. Research Design, Data, Methodology - This study is an index development research for measuring inter-enterprise cooperation level of logistics industry. Such a level was measured by performing a survey by targeting enterprises that participated in Joint logistics business. The targeting enterprises are typical cooperative models in logistics industry. Measurement items were developed which were based on the presented items in existing research. Question items were composed of selection type questions as answering Yes/No. They measures implementation status of corporate activity and detailed activity items measuring qualitative level. Total samples were based on 116 enterprise samples including 90 logistics enterprises and 26 shippers. In addition, by evaluating the importance for Joint logistics business recognition with personnel working level, the weight of measuring variable was extracted. This study has built an assessment tools (LPCI) on Joint logistics business cooperation level in a situation where there are no previous studies on joint logistics business, this study is meaningful for other studies. Results - As a result of analyzing LPCI presented in this study, the score of logistics enterprise was represented as 59.9 points based on full score of 100 points and that of shippers as 47.2 points and cooperation level among enterprises participated in Joint logistics business was revealed to be very low. In particular, as a result of measuring the importance between logistics enterprise and shippers, the difference by each measurement standard was represented among those enterprises. This difference is considered to be a key factor that cooperative operational conformity between logistics enterprises and shippers is represented to be low. Conclusions - As most joint logistics business, being promoted at present, is sharing facility and information with joint logistics business, it is hard to find such a joint logistics business in reality based on cooperative business model in main cooperation agents. Therefore, competitiveness of logistics industry could be strengthened by promoting joint logistics business based on their mutual cooperation among enterprises. In other words, it is to secure sustainable competitiveness of joint logistics business together with creation of new market by inter-enterprise cooperation based on integration of basic logistics business.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.2
• /
• pp.9-20
• /
• 2014

Steel intermediate moment frames (IMFs) have been generally used as seismic load resisting systems (SLRSs) of a building to provide resistances against strong ground shaking. However, most of low and mid-rise steel buildings in Korea were constructed during pre-seismic code era or before the introduction of well-organized current seismic codes. It has been recognized that the seismic performance of these steel IMFs is still questionable. In order to respond to such a question, this study quantitatively investigates the seismic capacities of steel IMFs. Prototype models are built according to the number of stories, the levels of elastic seismic design base shear and the ductilities of structural components. Also, the other prototype models employing hysteretic energy dissipating devices (HEDDs) are considered. The collapse mechanism and the seismic performance of the prototype models are then described based on the results obtained from nonlinear-static and incremental-dynamic analyses. The seismic performance of the prototype models is assessed from collapse margin ratio (CMR) and collapse probability. From the assessment, the prototype model representing new steel IMFs has enough seismic capacities while, the prototype models representing existing steel IMFs provide higher collapse probabilities. From the analytic results of the prototype models retrofitted with HEDDs, the HEDDs enhance the seismic performance and collapse capacity of the existing steel IMFs. This is due to the energy dissipating capacity of the HEDDs and the redistribution of plastic hinges.

• Journal of The Korean Association For Science Education
• /
• v.20 no.4
• /
• pp.680-692
• /
• 2000

An assessment instrument dealing with secondary students' views on the nature of science was developed in this study. The features in aspects of the nature of science are generally accepted as characterizing the scientific enterprise and we have focused on are: 1) the purposes of the scientific enterprise, 2) the nature of scientific enquiry, 3) the nature and status of scientific knowledge, and 4) the nature and functioning of the scientific community. The questionnaire is made of three sections; that is, "Scientific Question", "Experiment", and "Belief". The Scientific Questions probe was designed to examine the ways in which learners mark out science as a particular domain, and particularly the types of questions that they think are open to scientific investigation. The Experiment probe was designed to throw light on the ways in which learners may think about theories and their relationship to evidence in a range of contexts. A related aim concerns the sorts of activities that learners consider to be experiments, and their reasons for this. The Belief probe was designed to see whether students are able to articulate the grounds for their acceptance of a proposition and, if they are, to explore the nature of these grounds. The reliability of the instrument developed in this study was found to be 0.86.

• Journal of dental hygiene science
• /
• v.15 no.3
• /
• pp.325-332
• /
• 2015

The aim of this study was to investigate the relationship between the oral health status of elderly under visiting health care and their oral health-related quality of life. The subjects were 300 elderly under visiting health care program over 65 years old in Asan city and they were interviewed. The result showed that average Geriatric Oral Health Assessment Index (GOHAI) score was 37.36 and the lowest scored question was 'never satisfied with the oral condition'. In GOHAI related to oral health behaviors, unmet dental treatment experience was statistically significant (p<0.001). In overall GOHAI, number of remaining teeth (p<0.001) and the age had statistical significance and men had higher score in pain and discomfort (p<0.05), under age of 74 limited function factors score was high (p<0.01). The number of remaining teeth had statistical significances in most factors except pain and discomfort (p<0.001). The factors affecting GOHAI were age (p<0.05), number of remaining teeth (p<0.001) and perceived health state (p<0.001). In order to improve oral health-related quality of life of elderly receiving visiting oral health care services, it is necessary to increase denture support by securing budgets and developing oral health promotion programs at the local government level.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.3
• /
• pp.178-185
• /
• 2015

Purpose: The purpose of this study was to conduct a comparative assessment on the satisfaction level for the two interfaces of surgical guide system (SimPlant and R2GATE), the design and convenience of manufactured surgical guides and the importance of using the surgical guides thereof by means of survey. Materials and Methods: Hereupon, they simulated the implant surgical process by mounting the two manufactured systems of surgical guide on a dental mold, respectively. The study subjects were instructed to complete the questionnaire as to the satisfaction level upon completion of the simulated surgery. This study summarized the data of each question after collecting the completed questionnaires. Then, this study analyzed the summarized data by utilizing statistical program SPSS 20.0 (IBM). Results: R2GATE had a higher value of the satisfaction level on the design and convenience of manufactures surgical guides. R2GATE group ($7.33{\pm}1.26$) was found to have a higher value in terms of the overall satisfaction level compared to SimPlant group ($6.67{\pm}1.26$) (${\alpha}$ = 0.05). Conclusion: The user satisfaction level on the surgical guide manufactured for R2GATE system was to such an extent as it can be widely used in clinical environment. Moreover, the surgical guide manufactured as R2GATE system can guide both the length and direction of a drill simultaneously. As a result, it is highly recommended for those beginners who do not have a lot of experience in implant placement.