• 대한산업공학회지
• /
• 제20권4호
• /
• pp.153-180
• /
• 1994

The assemblability is determined by the structure of product and the relationship between composing parts and machining parts. In this paper, the bolt was divided into bolt-head, -shaft, -thread and -end. For higher assemblability in bolting process, it was analyzed the geometric and technological characteristics of bolts were analysed regarding pre- and in-assembly process. And this paper presents the knowledge-based expert system to assist for designer in the processor of designing bolt for easier assembly. The developed expert system for supporting bolt design assemblability which is named as BDFA SYSTEM consists of two system such as "BOLT DESIGN SYSTEM" which provide feasible assembly bolt design to designer and "EVALUATION SYSTEM" which provide assembly evaluation to alternative of bolt design.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.153-158
• /
• 2000

This paper addresses an intelligent robot control system using an off-line programming to teach a precise assembly task of electronic components in a flexible way. The investigated task consists of three job: heat caulking test, soldering on a circuit board, and checking of soldering defects on the back cover of a camera. This study investigates the remodelling of the most complicated cell in terms of the accuracy and fault rate among the twelve cells in a camera back-cover assembly line. We have attempted to enhance back-cover assembly line. We have attempted to enhance soldering quality, to add task flexibility, to reduce failure rate, and to increase product reliability. This study modifies the cell structure, and improves the soldering condition. The developed all system implements the real-time control of assembly with vision data, and realized an easier task teaching on off-line programming.

• International Journal of Automotive Technology
• /
• 제8권1호
• /
• pp.83-91
• /
• 2007

Nowadays, the increasing global competition forces manufacturing enterprises to apply new technologies such as laser welding to manufacturing of their products. In case of automotive industries, they interest in assembly system for BIW (Body in White) carrying out laser welding. In this paper, the method of implementation for digital laser welding assembly system is proposed. Based on the requirements of assembly tasks obtained through product analysis, process modeling is executed by using the IDEF0 and UML model. For digital assembly system, the selected components are modeled by using 3D CAD tools. According to the system configuration strategy, lots of the alternative solutions for the assembly system of welding side panels are generated. Finally, the optimal laser welding system is chosen by the evaluation of the alternative solutions with TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) method.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2007년 추계학술발표대회 개요집
• /
• pp.203-205
• /
• 2007

A spacer grid assembly, which is an interconnected array of slotted grid straps and is welded at the intersections to form an egg crate structure, is one of the main structural components of the nuclear fuel assembly for pressurized water reactors(PWRs). The spacer grid assembly is structurally required to have enough buckling strength under various kinds of lateral loads acting on the nuclear fuel assembly so as to keep the nuclear fuel assembly straight. And also, the spacer grid assembly is hydraulically required to have less hydraulic resistance of coolant. To meet this requirement, it is necessary to weld the welding parts carefully and precisely. In this study, weld qualities such as, weld bead size and spatter manufactured by various welders were compared and analyzed. And performance parameters such as impact strength of spacer grid and hydraulic resistance of coolant were also compared and analyzed. Comparison results show that the weld qualities could be improved by selecting the optimal welding condition and also improving the welding technique.

• 한국소음진동공학회논문집
• /
• 제23권1호
• /
• pp.49-55
• /
• 2013

A reactor vessel internals comprehensive vibration assessment program(RVI CVAP) of an advanced power reactor 1400(APR1400) is being performed as a non-prototype category-2 type of reactor based on the US nuclear regulatory commission regulatory guide(NRC RG) 1.20. The aim of this paper is to present the results of structural response analysis and measuring locations of a upper guide structure(UGS) assembly of the APR1400 reactor. The analysis results of the UGS assembly show that the specified integrity levels meet the design acceptance criteria. Also, the measuring locations are determined by the analysis results of the UGS assembly and selection criteria of previous study. These analysis results and measuring locations will be used as a guide to design a measurement system for the APR1400 RVI CVAP.

• Nuclear Engineering and Technology
• /
• 제40권6호
• /
• pp.439-450
• /
• 2008

The KSTAR device succeeded in first plasma generation on $13^{th}$ June of 2008 through comprehensive system test and commissioning. Among various kinds of the key factors that decisively affected the project, success in the construction and assembly of the major tokamak structure was most important one. Every engineering aspects of each structure were finally confirmed in the integrated commissioning period, and there were no severe troubles and failures prevented the KSTAR device from operating during the commissioning and the first plasma experiments. As a result, all of the experiences and technologies achieved through the KSTAR construction process are expected to be important fundamentals for future construction projects of superconducting fusion devices. This paper summarizes key engineering features of the major structures and of the machine assembly.

• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.2008-2017
• /
• 2002

Joint structure of a transducer horn-holder assembly fur a wire bonder was examined through FEM contact analysis. A three dimensional modeling and analysis was carried out to survey the internal physics of this structure and to prove the accuracy of a computation compared to a measurement. After validation, a simple two dimensional model was built fur various parametric study considering the efficiency and speed of the computation. Several factors such as boundary conditions, a modeling boundary, mesh density and so on, were considered to obtain consistency with three dimensional analysis. An arc angle and a position of each holder boss were chosen as design parameters. A design of experiment was applied to find out an optimized design of the holder geometry. As a result, a guideline for holder boss design was suggested and main factors and their influence on stress concentration in the transducer horn were surveyed.

• 한국기계가공학회지
• /
• 제21권2호
• /
• pp.79-86
• /
• 2022

Numerous fabrication techniques have been used to mimic cylindrical natural tissues, such as blood vessels, tendons, ligaments, and skeletal muscles. However, most processes have limitations in achieving the biomimetic properties of multilayered and porous architectures. In this study, to embrace both features, a novel self-assembly method was proposed using electrospun microfibrous sheets. A bilayer microfibrous structure, comprising two sheets with different internal stresses, was fabricated by electrospinning a polycaprolactone (PCL) sheet on a uniaxially stretched thermoplastic polyurethane (TPU) sheet. Then, by removing the stretching tension, the sheet was rolled into a hollow cylindrical structure with a specific internal diameter. The internal diameter could be quantitatively controlled by adjusting the thickness of the PCL sheet against that of the TPU sheet. Through this self-assembly method, biomimetic cylindrical structures with multilayer and porous features can be manufactured in a stable and controllable manner. Therefore, the resulting structures may be applied to various tissue engineering scaffolds, especially vascular and connective tissues.

• 한국기록관리학회지
• /
• 제19권3호
• /
• pp.97-121
• /
• 2019

본 연구는 국회 기록물관리 제도를 분석하여, 기록관리상의 문제점을 파악하고 그 대안을 제시하는 데 목적을 두었다. 연구 방법으로는 국회 조직 및 업무 분석을 바탕으로 국회의정활동 기록물의 개념을 정의하였고, 국회기록보존소와 헌정기념관의 국회기록물 관리현황을 분석하여 국회기록물 관리제도의 구조적 문제점을 도출하였다. 이에 "공공기록물 관리에 관한 법률" (이하 '공공기록물법')의 특별법으로서 국회기록물관리에관한법률(안)을 제시하였고 나아가 국회에 유한보존 기록물을 전담하는 중간기록물 관리기관 설치 및 헌정기념관의 수집기능을 국회기록보존소로 이관하여 의정활동 기록물의 통합 관리를 목표하였다. 이를 통해 모든 의정활동 기록물이 국회기록물 관리 체제 내에서 체계적으로 관리될 수 있는 방안에 대해 제안하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.225-228
• /
• 2005

Telescope structure based on Korsch type optical layout was suggested for a large aperture optical system. Korsch type optical layout is regarded as providing wide field of view and no color aberration for which high resolution space cameras greatly demand. For the suggested Korsch type telescope structure, two folding mirrors are adopted, firstly to provide for the refocusing device mounting plane on the second fold mirror assembly, secondly by double folding the light path to concisely confine focal plane assembly within the perimeter of the tube. Optical layput design and corresponding support structure design were attained.