• 한국산학기술학회논문지
• /
• 제12권11호
• /
• pp.4751-4755
• /
• 2011

본 연구는 자동차용 시트 Back frame 내부에 설치하여 탑승자의 등부분을 지지하며 편안한 승차감을 제공하는 시트용 서스펜션 시스템에 대한 연구이다. 운전자의 등 전체를 고르게 지지하는 구조로 설계하고 시트 백 프레임과 플라스틱 서스펜션의 조립을 효과적으로 할 수 있는 구조로 개발 하고자 한다. 서스펜션 단품은 운전자의 체압 분포를 고려하여 설계하고 시뮬레이션 해석에 있어서는 실제 모델과 같은 크기를 가지고 하였다. 플라스틱 서스펜션의 해석결과가 실제 측정값에 근접함을 확인하였으며 기존 Wire Type에 비해 양호한 체압분포를 얻을 수 있었다.

• 기록학연구
• /
• 제14호
• /
• pp.289-323
• /
• 2006

본 연구의 목적은 혁명력 2년 메시도르 7일(1794년 6월 25일)의 법령을 통해 초기 문서보관소의 체계와 문서분류 방법 및 그 조직만이 아니라 역사적 자료의 관리주체에 관한 초기의 논쟁을 살펴보고자 했다. 이 법안에는 오늘날의 문서 관리자들 혹은 역사가에게 경탄을 자아낼만한 두 가지 주제가 존재한다. 첫째로, 이 법령은 역사에 관련된 사료 문서들과 그것에 속하지 않는 다른 문서들 사이에 차이가 존재한다는 점을 분명히 한 점이다. 둘째로 역사적인 문서를 소장하는 장소와 관리 주체는 국립문서보관소가 아니라 국립도서관이라는 점이다. 결론적으로 프랑스 혁명 이후 기록 보존에 관한 국가의 책임, 국민의 자유로운 접근권 보장 등의 전통이 혁명력 2년 메시도르 7일의 법령을 통해 확립되었다. 그리고 동법을 통해 입법부와 문서보관소 위원회를 중심으로 국가 차원의 통일적인 관리 체계가 확립되었으며, 기록보존 장소는 지방분권적으로 이루어지는 전통이 확립되었음을 확인할 수 있었다.

• 한국산학기술학회논문지
• /
• 제21권6호
• /
• pp.440-447
• /
• 2020

조적구조는 소규모 건축물에서는 내력벽으로 사용되나 일반적으로 비내력벽으로 간주되어 건축물 골조구조의 내부공간을 구분하는 칸막이벽으로 활용되어진다. 또한 조적공사에서 블록이나 벽돌간의 접착제로 모르타르를 사용하는 습식공법은 양생시간이 필요하여 기후조건에 영향을 받으며, 특히 지진과 같은 횡력에 대해 모르타르의 균열로 벽체의 전도붕괴 등이 발생할 수 있어 매우 취약한 구조이다. 본 연구에서는 이러한 조적구조의 약축방향 전단강성을 보완하고 습식공법의 단점을 개선하는 건식 콘크리트블록 공법을 제안하고 그 구조거동을 규명하고자 한다. 이에 본 연구에서는 콘크리트블록의 재료물성을 살펴보고 수평반복하중에 대한 구조거동실험을 통해 제안된 건식조립 콘크리트블록 벽체의 내진성능을 검증하고자 한다. 본 연구결과에 의하면 첫째로, 콘크리트블록은 KS규준에 C종 블록의 재료성능 이상을 확보하고 있어 습식공법을 대신하는 건식공법에 적용할 수 있을 것이다. 둘째로, 수평반복하중에 대한 벽체의 구조성능은 벽체의 수평길이가 길어짐에 따라 사용된 표준형블록의 증가로 다수의 대각선방향 균열대를 형성하면서 조립블록벽체의 내력이 커짐을 알 수 있다. 끝으로 제안된 건식조립 콘크리트블록 벽체구조는 높이와 길이에 의한 벽체의 형상비가 수평 하중을 받는 구조거동에 주요 영향변수로 판단되어 이를 고려한 내진성능평가가 필요하다.

• Journal of Mechanical Science and Technology
• /
• 제20권4호
• /
• pp.437-446
• /
• 2006

Laser vision inspection systems are becoming popular for automated inspection of manufactured components. The performance of such systems can be enhanced by improving accuracy of the hardware and robustness of the software used in the system. This paper presents a new approach for enhancing the capability of a laser vision system by applying hardware compensation and using efficient analysis software. A 3D geometrical model is developed to study and compensate for possible distortions in installation of gantry robot on which the vision system is mounted. Appropriate compensation is applied to the inspection data obtained from the laser vision system based on the parameters in 3D model. The present laser vision system is used for dimensional inspection of car chassis sub frame and lower arm assembly module. An algorithm based on simplex search techniques is used for analyzing the compensated inspection data. The details of 3D model, parameters used for compensation and the measurement data obtained from the system are presented in this paper. The details of search algorithm used for analyzing the measurement data and the results obtained are also presented in the paper. It is observed from the results that, by applying compensation and using appropriate algorithms for analyzing, the error in evaluation of the inspection data can be significantly minimized, thus reducing the risk of rejecting good parts.

• 한국생산제조학회지
• /
• 제26권1호
• /
• pp.82-88
• /
• 2017

In 2016, a handmade vehicle called to the VF-3 was designed and manufactured as a formula typed car. Prior to manufacturing and assembly, the impact attenuator was analyzed through ANSYS LS-DYNA, and the results were applied to the VF-3. The dynamical performance of the VF-3, such as the acceleration and circling simulations, was also assessed through MSC-ADAMS. The results were applied and compared after the Korean Society of Automotive Engineers (KSAE) competition. There was only a 0.8 s difference in the acceleration test. In order that the frame was not twisted by thermal deformation, Argon-TIG welding was used and a zig was designed. Another zig was designed to have the exact position for the hardpoints in the suspension system. Most of the parts were made with aluminum 7050 for reduced weight. The VF-3 won the third prize in the 2016 KSAE Student Handmade Vehicle competition.

• 제어로봇시스템학회논문지
• /
• 제8권7호
• /
• pp.573-577
• /
• 2002

A tape feeder of a SMD(Surface Mount Device) mounter is a device that sequentially feeds electronic components on a tape reel to the pick-up system of the mounter. As components are getting much smaller, feeding accuracy of a feeder becomes one of the most important factors for successful component pick-up. Therefore, it is critical to keep the feeding accuracy to a specified level in the assembly and production of tape feeders. This paper describes a tape feeder inspection system that was developed to automatically measure and inspect feeding accuracy using machine vision. It consists of a feeder base, an image acquisition system, and a personal computer. The image acquisition system is composed of CCD cameras with lens, LED illumination systems, and a frame grabber inside the PC. This system loads up to six feeders at a time and inspects them automatically and sequentially. The inspection software was implemented using Visual C++on Windows NT with easily usable GUI. Using this system, we can automatically measure and inspect the quality of all feeders in production process by analyzing the measurement results statistically.

• Journal of Microbiology and Biotechnology
• /
• 제15권4호
• /
• pp.767-771
• /
• 2005

Expression in yeast may prove more amenable to generating large amounts of viral antigens for a vaccine candidate. We, therefore, cloned the gene encoding the Hepatitis C virus (HCV) structural proteins (C-El-E2, c740) fused in-frame with, and immediately 3' to, the chicken-lysozyme signal peptide (C-SIG) gene and under the control of the yeast glyceraldehyde-3-phosphate dehydrogenase gene promoter. In yeast, the HCV structural proteins were expressed in two different forms: a processed and a nonprocessed aggregated form. Biophysical characterization by sucrose linear gradient centrifugation revealed that both forms were present in the same fractions with a buoyant density of 1.127-1.176 g/$cm^3$. These findings suggest that the efficient synthesis of HCV structural proteins in yeast may be an important tool to study virus assembly and may lead to the development of an HCV vaccine.

• 수산해양기술연구
• /
• 제35권1호
• /
• pp.54-59
• /
• 1999

High-speed electronic digital computers have enabled engineers to employ various numerical discretization techniques for solutions of complex problems. The Finite Element Method is one of the such technique. The Finite Element Method is one of the numerical analysis based on the concepts of fundamental mathematical approximation. Three dimensional plate structures used often in partition of ship, box girder and frame are analyzed by Finite Element Method. In design of structures, the static deflections, stress concentrations and dynamic deflections must be considered. However, these problem belong to geometrically nonlinear mechanical structure analysis. The analysis of each element is independent, but coupling occurs in assembly process of elements. So, to overcome such a difficulty the shell theory which includes transformation matrix and a fictitious rotational stiffness is taken into account. Also, the Mindlin's theory which is considered the effect of shear deformation is used. The Mindlin's theory is based on assumption that the normal to the midsurface before deformation is "not necessarily normal to the midsurface after deformation", and is more powerful than Kirchoff's theory in thick plate analysis. To ensure that a small number of element can represent a relatively complex form of the type which is liable to occur in real, rather than in academic problem, eight-node quadratic isoparametric elements are used. are used.

• 정보관리학회지
• /
• 제34권1호
• /
• pp.317-340
• /
• 2017

학술과 문화 기반의 비이념적 정보교류협력은 비정치적이면서도 장기적 관점에서 민족 동질성과 신뢰회복에 가장 효과적일 수 있는 남북한 협력사업의 영역이라 할 수 있다. 이에 본 연구는 통일 한국을 대비하여 단계적인 남북한 협력기반 조성을 위해 국가도서관을 매개로 한 남북 문화교류협력에 관한 방안들을 조사 분석하였다. 관련하여 북한도서관의 기능과 한계 및 현재적 관점에서의 사회적 활용성을 살펴보고, 그간의 도서관교류협력사업을 남북한 문화분야 협력사업이라는 틀안에서 검토하였다. 이에 협력 거버넌스 체계구축 등 다섯 가지 협력안을 기반으로 남북 도서관교류협력의 단계적 모형을 제안하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.694-699
• /
• 2002

In autobody assembly, thin-wall, tubular connections have been used for the frame structure. Recent interest in light materials, such as aluminum or magnesium alloys, has been rapidly growing for weight reduction and fuel efficiency. Due to higher thermal expansion coefficient, low stiffness/strength, and low softening temperature of aluminum and magnesium alloys, control of welding-induced distortion in these connections becomes a critical issue. In this study, the material sensitivity to welding distortion was investigated using a T-tubular connection of three types materials; low carbon steel (A500 Gr. A), aluminum alloy (5456-H116) and magnesium alloy (AZ91C-T6). An uncoupled thermal and mechanical finite element analysis scheme using the ABAQUS software program was developed to model and simulate the welding process, welding procedure and material behaviors. The predicted angular distortions were correlated to the cumulative plastic strains. A unique relationship between distortion and plastic strains exists for all three materials studied. The amount of distortion is proportional to the magnitude and distribution of the cumulative plastic strains in the weldment. The magnesium alloy has the highest distortion sensitivity, followed by the other two materials with the steel connection having the least distortion. Results from studies of thin-aluminum plates show that welding distortion can be minimized by reducing the cumulative plastic strains by preventing heat diffusion into the base metal using a strong heat sink placed directly beneath the weld. A rapid cooling method is recommended to reduce welding distortion of magnesium tubular connections.