• ALGAE
• /
• v.18 no.1
• /
• pp.49-58
• /
• 2003

The short-term dynamics of the summer phytoplankton community structure were investigated in coastal waters around Namhae Island, the Southern Sea of Korea. The study was based on a comprehensive survey constituting 39 collections from 13 stations on July 18-22, August 1-2, 14-16 and 27-30, respectively. The community structure was analysed using cluster analysis and important environmental correlates of the assemblage structure were identified with canonical correspondence analysis (CCA). Water temperature, salinity, NO₂, NO₃, NH₄, PO₄, chlorophyll a and transparency were measured as physico-chemical environmental factors which may be associated with the phytoplankton community structure. Variations of salinity and concentrations of NO₃ and chlorophyll a were not significant. In addition to warmer water temperature, concentrations of NO₂, NO₄and PO₄ decreased at the beginning of August. And transparency was deeper and water column became very unstable after the middle of August. A wide taxonomic diversity was encountered during the survey, including a total of 121 taxa which was composed of 72 diatoms, 48 dinoflagellates and 1 euglenoid species. Cluster analysis showed that the Phytoplankton community could be divided into 4 distinct groups, indicating rapid changes of the community in the short course of this survey. These phytoplankton groups also showed distinctive dispersion patterns in 2-dimensional canonical space, indicating distinct groupings for stations at each survey. Dominant taxa of diatoms (Chaetoceros curvisetus, Chaetoceros spp., Leptocylindrus danicus, Leptocylindrus mediteraneus, Skeletonema costanum, and Pseudo-nitzschia pungen) clustered in region of CCA space corresponding to stations surveyed at the middle of July. Dominant taxa of dinoflagellates were tightly associated with stations surveyed at the middle (Karenia breve) and end (Cochlodinium polykrikoides and Polykrikos schwartzii) of August. The CCA also showed that the phytoplankton community compositions were highly associated with water temperature, transparency, NO₂, NH₄ and PO₄, suggesting that gradients in physical and nutrient conditions affect short-term changes in phytoplankton composition.

• Korean Journal of Ichthyology
• /
• v.33 no.2
• /
• pp.95-106
• /
• 2021

In order to understand the seasonal variations of species composition of fish in the Goseong, middle East Sea of Korea, we surveyed fish fauna using set net during 2 years. In this study, a total of 77 taxa belonging to 40 families were collected and 75 species were identified. The dominant family were Tetraodontidae and Pleuronectidae, and the dominant species were Arctoscopus japonicus, Konosirus punctatus, Stephanolepis cirrhifer, Thamnaconus modestus, and Trachurus japonicus. The results of the hierarchical clustering using the number of individuals of collected species showed that they are divided into three seasonal groups: Group A (Jan.~Apr.), Group B (May~Jun., Nov.~Dec.), Group C (Jul.~Oct.). The sea surface temperature (SST) was higher than the results of previous studies in winter and spring, and species composition in spring have changed from cold-water species to the warm-water species, recently. The species composition has become similar to the that of southern Gangwon-do regions (Samcheok and Gangneung) of the previous studies. The species diversity of family Tetraodontidae has increased, which is estimated to have an effect on increase in SST and the quantity of entering the East Sea. Therefore, we assumed that the change of species composition is related to the extension of northern distribution limits and survival temperature, and abundant preys. Therefore, it is necessary that an efficient resource management policy as well as the ways of commercially use of migratory warm-water fish, rapidly.

• ALGAE
• /
• v.39 no.2
• /
• pp.75-96
• /
• 2024

Rhodomonas (Cryptophyceae) and species assigned to this genus have undergone numerous taxonomic revisions. This also applies to R. marina studied here as it was originally assigned as a species of Cryptomonas and later considered a variation of R. baltica, the type species. Despite being described more than 130 years ago, R. marina still lacks a comprehensive characterization. Light and electron microscopy were employed to delineate a strain from western Greenland. The living cells were 18 ㎛ long and 9 ㎛ wide, elliptical in shape with a pointed to rounded posterior and truncated anterior in lateral view. Two sub-equal flagella emerged from a vestibulum, where also a furrow extended. In transmission electron microscopy, the furrow was associated with a tubular gullet and the pyrenoid embedded in a deeply lobed chloroplast. The chloroplast contained DNA in perforations and was surrounded by starch grains. A tubular nucleomorph was enclosed within the pyrenoid matrix. In scanning electron microscopy, the inner periplast consisted of rectangular plates with rounded edges and posteriorly these were replaced by a sheet-like structure. The water-soluble pigment was Crypto-Phycoerythrin type I (Cr-PE 545). A phylogenetic inference based on SSU rDNA confirmed the identity of strain S18 as a species of Rhodomonas as it clustered with congeners but also Rhinomonas, Storeatula, and Pyrenomonas. These genera formed a monophyletic clade separated from a diverse assemblage of other cryptophyte genera. To further explore the phylogeny of R. marina a concatenated phylogenetic analysis based on the SSU rDNA-ITS1-5.8S rDNA-ITS2-LSU rDNA region was performed but included only closely related species. The secondary structure of nuclear internal transcribed spacer 2 was predicted and compared to similar structures in related species. Using morphological and molecular signatures as diagnostic features the description of R. marina was emended.

• Korean Journal of Ichthyology
• /
• v.4 no.1
• /
• pp.87-95
• /
• 1992

Diurnal variation of fish assemblage in the coastal waters, Shinsudo, Samchonpo was investigated using samples collected by RN 80net. A total of 32 species in 24 families was classfied from samples collected during the period of investigation. Enedrias nebulosus, Acanthogobius flavimanus, callionymus sp. dominated in number of individuals. These three most abundant fish species accounted for approximately 55.3% of the total number of fish collected. The percentage similarity values of number were larger than those of biomass. The catches in January and May 1987 showed a significant difference between day and night compositions. The number of species and individuals peaked just after twilight and low tide.

• Journal of the Mineralogical Society of Korea
• /
• v.9 no.1
• /
• pp.43-53
• /
• 1996

The detailed crystal chemistry of ilmenite from the Hadong massif was studied by the EPMA, M ssbauer spectroscopy, and Rietveld structural refinement using X-ray powder diffraction data. The ilmenite-bearing anorthosite shows complicated mineral assemblage which consists of plagioclase, clinopyroxene, hornblende, biotite, chlorite, apatite, allanite, and zircon. Anorthite is andesine in composition (Ab 28-57), and clinopyroxene drops in ferro-hypersthene (Fs 62-70). Ilmenite is trigonal symmetry with R space group, whose structure shows the alternation of Fe2+ (M1 site) octahedral layer and Ti (M2 site) layer along c axis. M ssbauer spectroscopy indicates that there are three doubles which assigned to couple of Fe2+($\delta$=0.812, 0.890mm/sec) and one Fe3+($\delta$=0.303mm/sec) in octahedral sites. Their Fe3+/$\Sigma$Fe is 0.065 and chemical formula is established as Fe2+0.94Fe3+0.07Ti0.97O3 using both EPMA and M ssbauer analysis. Rietveld structural refinement reveals that site occupancies of Fe in M1 and Ti in M2 are 91.2% and 89.4%, respectively. This implies that Ti and Fe2+ are alternatively occupy M1 and M2 sites. In addition, smaller M2 site is more preferable to Fe3+ occupancy over M1.

• Korean Journal of Crystallography
• /
• v.14 no.2
• /
• pp.79-83
• /
• 2003

The microstructure of bulk electrolytic MnO₂ (EMD) was studied using x-ray diffraction and transmission electron microscopy (TEM). The bulk sample showed a typical powder x-ray diffraction pattern of EMD materials. TEM study showed that the structure of EMD is present at two length scales;grains, ∼0.2 ㎛ in diameter, and ∼10 nm crystallites within the grain. The electron beam microdiffraction study revealed that each grain is an assemblage of multiphase with a common crystallographic orientation, and_that ∼50% of the crystallites are Ramsdellite, ∼30% are ε-MnO₂, and ∼15% are Pyrolusite. The ｛1120｝peak located at about 67° in powder XRD pattern as well as a high-resolution electron microscope (HREM) image of (0001) plane support the existence of ε-MnO₂ phase.

• International Journal of Concrete Structures and Materials
• /
• v.9 no.4
• /
• pp.401-413
• /
• 2015

In this study the progressive collapse resisting capacity of a RC beam-column subassemblage with and without strengthening was investigated. Total of five specimens were tested; two unreinforced specimens, the one designed as gravity load-resisting system and the other as seismic load-resisting system, and three specimens reinforced with: (i) bonded strand, (ii) unbonded strand, and (iii) side steel plates with stud bolts. The two-span subassemblages were designed as part of an eight-story RC building. Monotonically increasing load was applied at the middle column of the specimens and the force-displacement relationships were plotted. It was observed that the gravity load-resisting specimen failed by fractures of re-bars in the beams. In the other specimens no failure was observed until the maximum displacement capacity of the actuator was reached. Highest strength was observed in the structure with unbonded strand. The test result of the specimen with side steel plates in beam-column joints showed that the force-displacement curve increased without fracture of re-bars. Based on the test results it was concluded that the progressive collapse resisting capacity of a RC frame could be significantly enhanced using unbonded strands or side plates with stud bolts.

• Structural Engineering and Mechanics
• /
• v.63 no.5
• /
• pp.691-702
• /
• 2017

Clearances are essential for the assemblage of mechanisms to allow the relative motion between the joined bodies. This clearance exists due to machining tolerances, wear, material deformations, and imperfections, and it can worsen the mechanism performance when the precision and smoothly-working are intended. Energy is a subject which is less paid attention in the area of clearance. The effect of the clearance on the energy of a flexible slider-crank mechanism is investigated in this paper. A clearance exists in the joint between the slider and the coupler. The contact force model is based on the Lankarani and Nikravesh model and the friction force is calculated using the modified Coulomb's friction law. The hysteresis damping which has been included in the contact force model dissipates energy in clearance joints. The other source for the energy loss is the friction between the journal and the bearing. Initial configuration and crank angular velocity are changed to see their effects on the energy of the system. Energy diagrams are plotted for different coefficients of friction to see its influence. Finally, considering the coupler as a flexible body, the effect of flexibility on the energy of the system is investigated.

• Korean Journal of Environmental Biology
• /
• v.35 no.4
• /
• pp.545-548
• /
• 2017

Nannophya pygmaea (commonly known as the scarlet dwarf dragonfly) was designated as an endangered species, level II, by the Ministry of Environment of Korea in 1994; it has been used as a flagship species for the protection and preservation of wetlands. Over 25 sites in Korea have been identified as the habitat of Nannophya pygmaea. However, most of these habitats have proven to be unstable, and there have been subsequent changes in the assemblage structure and organization. Most habitats changed to become grasslands or plain ground, and now only five habitats remain. Although efforts have been made to protect the Nannophya pygmaea as an endangered species, their habitat loss has increased, caused by natural succession and drought. Therefore, we need to make stronger protections in the preservation manual of level II endangered species, particularly Nannophya pygmaea, and its native habitats in Korea.

• Structural Engineering and Mechanics
• /
• v.85 no.2
• /
• pp.147-161
• /
• 2023

Based on the ideas of variational differential quadrature (VDQ) and finite element method (FEM), a numerical approach named as VDQFEM is applied herein to study the large deformations of plate-type structures under static loading with arbitrary shape hole made of functionally graded graphene platelet-reinforced composite (FG-GPLRC) in the context of higher-order shear deformation theory (HSDT). The material properties of composite are approximated based upon the modified Halpin-Tsai model and rule of mixture. Furthermore, various FG distribution patterns are considered along the thickness direction of plate for GPLs. Using novel vector/matrix relations, the governing equations are derived through a variational approach. The matricized formulation can be efficiently employed in the coding process of numerical methods. In VDQFEM, the space domain of structure is first transformed into a number of finite elements. Then, the VDQ discretization technique is implemented within each element. As the last step, the assemblage procedure is performed to derive the set of governing equations which is solved via the pseudo arc-length continuation algorithm. Also, since HSDT is used herein, the mixed formulation approach is proposed to accommodate the continuity of first-order derivatives on the common boundaries of elements. Rectangular and circular plates under various boundary conditions with circular/rectangular/elliptical cutout are selected to generate the numerical results. In the numerical examples, the effects of geometrical properties and reinforcement with GPL on the nonlinear maximum deflection-transverse load amplitude curve are studied.