• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4095-4101
• /
• 2022

Following the climate-related disasters considered by several efforts, the nuclear capacity needs to double by 2050 compared to 2015. So, it is reasonable to investigate global warming incorporated with the fuzzy set theory for nuclear energy consumption in the aspect of fuzziness and nonlinearity of temperature variations. The complex modeling is proposed for the enhanced assessment of climate change where simulations indicate the degree of influence with the Boolean values between 0.0 and 1.0 in the designed variables. In the case of OIL, there are many 1.0 values between 20^th and 60^th months in the simulations where there are 10 times more for a 1.0 value in influence. Hence, the temperature variable can give the effective time using this study for 100 months. In the analysis, the 1.0 value in NUCLEAR means the highest influence of the modeling as the temperature increases resulting in global warming. In detail, the first influence happens near the 8th month and then there are four times more influences than effects in the early part of the temperature mitigation. Eventually, in the GLOBAL WARMING, the highest peak is around the 20^th month, and then it is stabilized.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3559-3570
• /
• 2023

In the decommissioning of nuclear facilities, Derived Concentration Guideline Level (DCGL) derivation is necessary for the release of the facility after the site remediation, which also needs to be implemented in the stage of establishing a decommissioning planning. In order to derive DCGL, the dose assessment for the receptors can be conducted from residual radioactivity by using RESRAD code. When performing sensitivity analysis on probabilistic parameters, secondary evaluation is performed by assigning a single value for parameters classified as sensitive. However, several options may arise in the handling of nonsensitive parameters. Therefore, we compared the results of the first execution of RESRAD applying probabilistic parameters for each scenario with the results of the second execution applying a single value to sensitive parameters among the probabilistic parameters. In addition, we analyzed the effect of setting options for non-sensitive parameters. As a result, the effect on DCGL were different depending on the application scenario, the target radionuclides, and the input parameter selections. In terms of the overall evaluation period, the DCGL graph of the default option was generally shown as the most conservative except for some radionuclides. However, it will not necessarily be given priority in the aspect of the need to reflect site characteristics. The reason for selecting a probabilistic parameter is the availability of the parameter and the uncertainty of applying a single value. Therefore, as an alternative, it can be consistently applied to distribution as an option for non-sensitive parameters after sensitivity analysis.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3860-3865
• /
• 2023

A metallic microcell UO₂ pellet has a microstructure where a metal wall is connected to overcome the low thermal conductivity of the UO₂ fuel pellet. It has been verified that metallic microcell fuel pellets provide an impressive reduction of the fuel centerline temperature through a Halden irradiation test. However, it is difficult to predict the effective thermal conductivity of these pellets and researchers have had to rely on measurement and use of the finite element method. In this study, we designed a unit microcell model using a thermal resistance circuit to calculate the effective thermal conductivity on the basis of the microstructure characteristics by using the aspect ratio and compared the results with those of reported metallic UO₂ microcell pellets. In particular, using the thermal conductivity calculated by our model, the fuel centerline temperature of Cr microcell pellets on the 5th day of the Halden irradiation test was predicted within 6% error from the measured value.

• Nuclear Engineering and Technology
• /
• v.56 no.2
• /
• pp.536-545
• /
• 2024

Radioactive iodine is a representative fission product to be quantified for the safety assessment of nuclear facilities. In integral severe accident analysis codes, the iodine behavior is usually described by a multi-physical model of iodine chemistry in aqueous phase under radiation field and mass transfer through gas-liquid interface. The focus of studies on iodine source term evaluations using the combination approach is usually put on the chemical aspect, but each contribution to the iodine amount released to the environment has not been decomposed so far. In this study, we attempted the decomposition by revising the two-film theory of molecular-iodine mass transfer. The model involves an effective overall mass transfer coefficient to consider the iodine chemistry. The decomposition was performed by regarding the coefficient as a product of two functions of pH and the overall mass transfer coefficient for molecular iodine. The procedure was applied to the EPICUR experiment and suppression chamber in BWR.

• Structural Engineering and Mechanics
• /
• v.90 no.4
• /
• pp.391-401
• /
• 2024

The present study focuses on the effect of extension-bending coupling on the elastic stability (buckling) of laminated composite plates. These plates will be loaded under uni-axial or bi-axial in-plane mechanical loads, especially in the orthotropic or anti-symmetric cross-angle cases. The main objective is to find a limit where we can approximate the elastic stability behavior of angularly crossed anti-symmetric plates by the simple behavior of specially orthotropic plates. The contribution of my present study is to predict the explicit effect of extension-flexion coupling on the elastic stability of this type of panel. Critically, a parametric study is carried out, involving the search for the critical buckling load as a function of deformation mode, aspect ratio, plate anisotropy ratio and finally the study of the effect of lamination angle and number of layers on the contribution of extension-flexure coupling in terms of plate buckling stability. We use first-order shear deformation theory (FSDT) with a correction factor of 5/6. Simply supported conditions along the four boundaries are adopted where we can develop closed-form analytical solutions obtained by a Navier development.

• Nuclear Engineering and Technology
• /
• v.56 no.7
• /
• pp.2545-2556
• /
• 2024

In the present study, we investigated the velocity distribution, temperature distribution and condensation characteristics of steam jet issuing from four different orifice nozzles with a Reynolds number of approximately 79,000 using the phase Doppler particle analyzer system and a K-type thermocouple. The steam jet discharged from the orifice nozzle has a wider jet width compared to pipe nozzle because of the vena-contracta which can enhance the mixing of steam jet with the ambient air. Therefore, the orifice jet showed less condensation due to its wideness, resulting in small velocity decay rate and large temperature decay rate due to momentum conservation and decreased latent heat release compared to pipe nozzle, respectively. Also, the wider jet width of the orifice jet resulted in larger velocity and temperature spread rate compared to the pipe jet. In addition, the increase in the aspect ratio of the orifice jet led to more condensation and larger velocity spread rate and temperature spread rate due to both the vena-contracta and axis-switching effect, resulting in the increase of jet entrainment.

• Nuclear Engineering and Technology
• /
• v.56 no.8
• /
• pp.3268-3275
• /
• 2024

Isotopes are an important aspect of modern medical and scientific research and cyclotron-based isotope production is of particular interest. Cooling devices are required to manage the heat generated by high-energy particle beams to ensure that they can be delivered securely. However, there is considerable scope for further advancements in the design of cooling systems. Therefore, this study uses simulations to investigate the design of innovative cooling systems. Various designs and materials are considered using a variable four-sector collimator and various particle-beam conditions. Thus, new design principles and material and structural optimization strategies are proposed, which can be used to improve the stability and efficiency of isotope production. The results provide insight into technical challenges and may contribute toward advances in medical diagnostics, radiotherapy, and fundamental scientific research. In particular, they can guide the development of isotopebased technologies in nuclear medicine.

• Journal of the Korean Society of Radiology
• /
• v.10 no.4
• /
• pp.247-253
• /
• 2016

Ultrasound devices diagnose many disease, which is widely used, can not be standardized quantitative evaluated in order to evaluate sonography image of quality. Therefore, in this papers, aims to get correct image in order to accurate diagnosis by figuring out the appropriate parameter based on each target by measuring distortion which results in the analyzation of the sensitivity of SNR and the histogram of signal by manipulating parameter of 8 mm target in ATS-539 multipurpose phantom. Equipment using Acuson sequoia 512, convex probe and utilizes multi-objective phantom. experiment method is that first you put the phantom on the flat and acquire 85 sheets of image, changing frequency(2,3,4 MHz, harmonic 3, 4, 4.5 MHz), Focus(2, 4, 6 unit), and Dynamic Range(58, 68, 78, 88, 98) for a 8 mm structure. through the Image J program. The sensitivity angle of 8mm target through Image J program is gauged by each separate target SNR and the distorted angle subtract and measure Histogram of background from Histogram of signal and take top 40% from the given result value above. According to parameter variation we found out proper parameter by acquiring SNR of sensitivity and distortion data for aspect of transition. The more this findings have Focus, the lower distortion value and at 4 MHz frequency this result have high SNR and low distortion value. Dynamic Range got an appropriate image on 88 and 98. It is considered on the basis of the experimental data, the probability of disease diagnosis will get higher.

• Korean journal of applied entomology
• /
• v.23 no.2 s.59
• /
• pp.109-115
• /
• 1984

This study was conducted to investigate the bionomics, host range and damage aspect of Japanese juniperus bark borer, Semanotus bifasciatus M., which shoves the severe damage for the Juniperace in Chonnam province, recently. Host plants were Juniperus virginiana, J. chinensis var. kaizuka, J. chinensis, Biata orientalis var. nepalensis, Chamaccyparis ostus and Thujopsis dolabrata. Out of those, J. chinensis var. kaizuka is newly investigated in this study. Damage rate in each area was $16.5\%$ in Kwangju, $4.25\%$ in Damyang ana $6.5\%$ in Hwasoon. Adults appear once a year, with a peak at late March to early April. Adults emergence during the day showed the peak at 13 to 15 hours and were influenced in the maximum temperature in a day. Attack direction of larva after invasion in the stem was $62\%$ toward base, $22\%$ toward tip and $16\%$ toward horizon, and the damage in each DBH (Diameter of breast height) was the greatest at $30\~40mm$. At period of each stage, egg was $15.8\~19.7$ days, larva was $l12\~126$ days and pupa was $15\~21$ days. Longevity of adult was 19 days for female and 16 days for male.

• Journal of the Korean Magnetics Society
• /
• v.22 no.2
• /
• pp.58-65
• /
• 2012

Since Nd-Fe-B magnet was first synthesized in 1983, many new applications have emerged in the past two decades. With regard to motor market, it will expand because of strong energy saving requirements from the automobile and electric application markets. Especially, permanent magnet motors for hybrid and electric vehicles are drawing great attention and the usage of Nd-Fe-B magnets will increase all the more hereafter. There is, however, a serious problem as motors in such eco-friendly cars are said to operate in high temperatures of about $200^{\circ}C$. Nd-Fe-B magnet has a drawback of dramatically decreasing coercive force with the rise of temperature. In order to improve this aspect. the best way is to add dysprosium (Dy) into the magnet. So, Dy has become an essential element for Nd-Fe-B high-performance magnet as it helps to maintain coercive force even at high temperatures. On the other hand, the rare earth resources in the earth crust are eccentrically-located and its majority is produced in China. There is a need to reduce its usage as, especially compared to light rare earth elements as neodymium (Nd) and samarium (Sm), heavy rare earth elements including Dy are unevenly distributed to a dramatic degree, their output low, and their prices are about 10 times that of Nd. The present article includes a summary of the trend in research and development of motors and permanent magnets to solve rare-earth resources problem.