• Structural Engineering and Mechanics
• /
• 제16권1호
• /
• pp.47-62
• /
• 2003

The nonlinear dependence aspect of various conical tool indentation parameters leading to an optimum tool semi angle value for easiest perforation is plotted and discussed explicitly in this work with the conclusion that tool angle has an optimum response towards most of the indentation parameters. Around this optimum angle, the aluminium sheets showed minimum fracture toughness as well as minimum work input to overcome the offered resistance. At the end, the mechanism leading to this phenomenon is presented with the conclusion that plastic flow dominates as the dimple semi cone angle reaches 35 and both pre and post plastic flow perforations lead the tool semi cone angle value towards this dimple cone semi angle of plastic flow initiation for its optimum performance. It is also concluded that specimen material failure is solely under tensile hoop stress and hence results into radial cracks initiation and propagation.

• 한국광학회지
• /
• 제21권6호
• /
• pp.241-246
• /
• 2010

본 논문에서는 근접장 패턴의 깊이와 종횡비(aspect ratio) 향상을 위해 전기장이 적용된 노광후굽기(electric field enhanced postexposure baking) 공정을 제안하였다. 전기장이 적용된 노광후굽기 공정 중 광산(photoacid) 분포를 기술하기 위하여 픽(Fick)의 확산 제 2법칙에 기반을 둔 지배방정식을 구성하였다. 수치해석(numerical calculation)을 통해 전기장의 세기가 0 에서 $8.0{\times}10^6\;V/m$ 로 증가함에 따라 광산의 수직적 이동거리가 늘어나는 것에 반해 수평적 이동거리는 거의 변화가 없음을 확인하였고, 이 때 근접장 패턴 형상을 얻었다. 이를 통해 근접장 패턴의 깊이, 종횡비, 패턴의 측벽 각(sidewall angle)이 향상됨을 알 수 있었다.

• 건축역사연구
• /
• 제12권4호
• /
• pp.63-79
• /
• 2003

Considering the established research about the characteristics of traditional expression in a contemporary korean architecture, there are two critical problems. the one is that the extent of a case is limited to a public building and a large exhibition building. the other is that the angle of research focus on the viewpoint of specific a level. To settle these problems and supplement a established research, this study is to investigate and analyze the characteristics of popular traditional expression in small commercial buildings. In A viewpoint on the expansion of a case and a various angle, A small commercial buildings is selected as a case. because it is felt that the populace's taste vis-a-vis traditional expression. To investigate and analyze, A main analytic criterion is follows. 1) A expressional method on traditional architectural form 2) A expressional aspect by architectural element 3) A expressional aspect in architectural material 4) A expressional aspect in architectural structure. In consequence we can find out the following results in the process of analysis. 1) In expressional method on traditional architectural form, the traditional expression is represented as the imitation and transformation of a traditional folk house forms, and the embodiment of traditional image 2) In expressional aspect by architectural element, the traditional expression elements is mainly represented at a straw roof and a mud-plastered wall 3) the traditional expression material is mainly straw, timber, small wood boards and mud 4) In expressional aspect in architectural structure, the traditional expression is represented from the viewpoint of decorative expression.

• 동력기계공학회지
• /
• 제19권4호
• /
• pp.36-42
• /
• 2015

TMixed convective flow in a bottom heated and top cooled rectangular channel can be significantly affected by the channel aspect ratio, Prandtl number, Reynolds number, Rayleigh number and angle of inclination. In such a mixed convection, the flow pattern plays an important role in various technological processes. In this study, a numerical investigation is carried out to explore mixed convection in a three-dimensional rectangular channel with bottom heated and top cooled uniformly. The three-dimensional governing equations are discretized using the finite volume method. In the range of low Reynolds number($0{\leq}Re{\leq}9.6{\times}10^{-2}$), the effects of the aspect ratio($2{\leq}AR{\leq}12$) and Gr/Re are presented and discussed. The longitudinal roll number in the channel is increased with increasing aspect ratio, and the roll number induced, regardless of the aspect ratio number, is even in the range of aspect ratios between 2 and 12, New vortex flow structure containing inclined longitudinal rolls is found, which is affected by aspect ratio and Reynolds number. The ratio Gr/Re is used to check the relative magnitudes of forced and natural convection in the mixed convective flow of high viscous fluid.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.339-344
• /
• 2001

The present study investigates convective heat/mass transfer and flow characteristics in wavy ducts of primary surface heat exchanger. Experiments using a naphthalene technique are carried out to determine the local transfer characteristics for flow in the corrugated wall duct. The aspect ratios of the rectangular duct cross-section are 7.3, 4.7 and 1.8 with a corrugation angle of $145^{\circ}$. The Reynolds numbers, based on the duct hydraulic diameter, are ranged from 1000 to 5000. The local heat/mass transfer measurement is conducted in the spanwise directions. The results show that Tayler-Gortler vortices exist on the pressure surface. Flow separation on the suction surface appears at a high Reynolds number resulting in a sharp decrease in the local transfer rates, but relatively high transfer rates are obtained in the reattachment region.

• 한국생산제조학회지
• /
• 제19권2호
• /
• pp.235-240
• /
• 2010

The recent trend of vehicle design aims at crash safety and environmentally-friendly aspect. For the crash safety aspect, energy absorbing members should be absorbed with collision energy sufficiently. But vehicle structure must be light weight for the environmentally-friendly aspect, in order to improve fuel efficiency and to reduce tail gas emission. Therefore, the light weight of vehicle must be achieved in a status of securing safety of crash. An aluminum or CFRP (Carbon Fiber Reinforced Plastics) is representative one among the light-weight materials. In this study, impact collapse behavior of circular hybrid thin-walled member is evaluated. The hybrid members are manufactured by wrapping CFRP prepreg sheets outside the aluminum circular members in the autoclave. Because the CFRP is an anisotropic material whose mechanical properties change with its stacking condition, special attention is given to the effects of the stacking condition on the collapse behavior evaluation of the hybrid thin-walled member. Collapse mode and energy absorption capability of the hybrid thin-walled member are analyzed with change of the fiber orientation angle and interface number.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.81-84
• /
• 2001

An inverse finite element approach is employed for more capability to design the optimum blank shape from the desired final shape with small amount of computation time and effort. In some drawing or stamping simulation with inverse method, it is difficult to apply inverse scheme due to the large aspect ratio or steep vertical angle of inclination. The reason is that initial guesses are hard to make out with present method for those cases. In this paper, a direct mesh marring scheme to generate initial guess on the sliding constraint surface described by finite element patches is suggested for one step inverse analysis to calculate initial blank shape. Radial type mapping is adopted for the simulation of rectangular cup drawing process with large aspect ratio and parallel type mapping for the simulation of S-Rail forming process with steep vertical angle of inclination.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.660-665
• /
• 1993

An elastic model is developed to predict the average thermal residual stresses in the matrix and fiber of a misoriented short fiber composite. The thermal residual stresses are induced by the mismatch in the coefficient of the thermal expansion of the matrix and fiber when the composite is subjected to a uniform temperature change. The model considers two special cases of fiber misorientation ; two-dimensional in-plane and three-dimensional axisymmetric. The analytical formulation of the model is based on Eshelby's equivalent inclusion method and is nuque in that it is able to account for interactions among fibers. The model is more general than past models and it is able to treat prior analyses of the simpler composite systems as extram cases. The present model is to investigate the effects of fiber volume fraction, distribution type, distribution cut-off angle, and aspect ratio on thermal residual stress for both in-plane and axisymmetric fiber misorientation. Fiber volum fraction, aspect ratio, and disturbution cut-off angle are shown to have more significant effects on the magnitude of the thermal residual stress than fiber distrubution type for both in-plane and axisymmetric misorientation.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.89-92
• /
• 2004

This paper is concerned with the drawing process of Al-Si wire. In this study, the finite-element model established in previous work was used to analyze the effects of various forming parameters, which included the reduction in area, the semi-die angle, the aspect ratio and the inter-particle spacing of the Si in drawing processes. The finite-element results gave the consolidation condition. From the results of analysis, the effects of each forming parameter were determined. It is possible to obtain the important basic data which can be guaranteed in the fracture prevention of Al-Si wire by using FEM simulation.

• 한국전자파학회논문지
• /
• 제13권8호
• /
• pp.777-782
• /
• 2002

일반적인 시간 영역에서의 레이더 신호들은 표적의 관측각에 민감하게 변화한다. 따라서 대표적인 시간영역 레이더 신호인 1차원 range profile을 이용하여 구분실험을 하는 경우에 있어서 central moments와 PCA를 결합하여 먼저 특성벡터를 추출한 후 clustering 기법에 기반한 subclass concept을 사용하는 구분기를 사용하여 넓은 관측각에서의 표적인식 성능을 향상시킨 결과들을 보여준다.