• Title/Summary/Keyword: Aspect Ratio

Search Result 2,862, Processing Time 0.029 seconds

Interfacial Control of Multi-functional CNT and ITO/PET Nanocomposites having Self-Sensing and Transparency (자체-감지능 및 광투과도를 지닌 CNT 및 ITO/PET 다기능성 나노복합소재의 계면 조절 연구)

  • Wang, Zuo-Jia;Kwon, Dong-Jun;Gu, Ga-Young;Park, Joung-Man
    • Composites Research
    • /
    • v.24 no.1
    • /
    • pp.45-50
    • /
    • 2011
  • Transparent and conductive carbon nanotube on polyethylene terephthalate (PET) were prepared by dip-coating method for self-sensing multi-functional nanocomposites. The changes in the electrical and optical properties of CNT coating mainly depended on the number of dip-coating, concentration of CNT solution. Consequently, the surface resistance and transmittance of CNT coating were sensitively controlled by the processing parameters. Surface resistance of CNT coating was measured using four-point method, and surface resistance of coated CNT could be better calculated by using the dual configuration method. Optical transmittance of PET film with CNT coating was evaluated using UV spectrum. Surface properties of coated CNT investigated by wettability test via static and dynamic contact angle measurement were consistent with each other. As dip-coating number increased, surface resistance of coated CNT decreased seriously, whereas the transmittance exhibited little lower due to the thicker CNT networks layer. Interfacial microfailure properties were investigated for CNT and indium tin oxide (ITO) coatings on PET substrates by electrical resistance measurement under cyclic loading fatigue test. CNT with high aspect ratio exhibited no change in surface resistance up to 2000 cyclic loading, whereas ITO with brittle nature showed a linear increase of surface resistance up to 1000 cyclic loading and then exhibited the level-off due to reduced electrical contact points based on occurrence of many micro-cracks.

An Analysis of Gender-Role Stereotyping in the Illustrations of Middle School Science Textbooks Developed under the 2007 Revised National Curriculum (2007 개정 교육과정에 의한 중학교 과학 교과서의 삽화에 나타난 성역할 고정관념 분석)

  • You, Ji-Yeon;Lee, Ji-Hyeon;Jo, Jun-Mo;Noh, Tae-Hee
    • Journal of the Korean Chemical Society
    • /
    • v.56 no.4
    • /
    • pp.509-517
    • /
    • 2012
  • In this study, the illustrations of 27 middle school science textbooks developed under the 2007 Revised National Curriculum were analyzed in the aspect of gender-role stereotyping, and the results were compared with those of the 7th National Curriculum. The types of the illustrations were classified, and the frequencies of pupils and adults who appeared on the illustrations were counted by gender, and the types of activities and the character of them were also analyzed by gender. In all results of the analyses, the differences between male and female decreased in comparison with those of the 7th National Curriculum. More male pupils appeared in the illustrations than female pupils. The frequencies of learning activities were balanced by gender, but other activities were described as focusing on male pupils. The frequencies of male adults outnumbered female adults. While the ratio of female adults was high in houseworks, that of male adults was high in outdoor activities. The jobs of adults were also illustrated as male-centered. Most pupils and adults were found to be active. Both ratios of pupils and adults for each gender were relatively similar.

Analysis of the Flexural Vibrations for the Rotating Cantilevered Rectangular Plates (회전하는 외팔 사각판의 굽힘진동 해석)

  • 이종민;이영신
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 1992.10a
    • /
    • pp.59-64
    • /
    • 1992
  • 터빈 블레이드와 같이 회전하는 구조물의 파단은 공진 근처에서 진동이 발 생할 때에 이에 기인하는 피로에 의하여 발생한다. 그러므로 이와 같은 파단 을 피하기 위해서는 설계 단계에서 이론적인 계산에 의하여 구조물의 고유 진동수를 결정하는 것이 상당히 중요하다. 판이 회전을 받게 되면 원심력에 의하여 판의 강성이 증가하므로 고유진동수가 회전하지 않는 판의 고유진동 수보다는 상당히 증가하게 된다. 이에 대한 연구가 국내외에서 상당수 행하 여졌지만, 연구의 대부분이 회전의 영향을 고려하지 않은 정지판(stationary plate)에 대한 것이며 뢰전을 고려한 연구는 극히 제한되어 있다. 또한 회전 의 영향을 고려한 연구의 대부분이 해석 대상을 보로서 단순화 시켰고 해법 으로는 유한요소법과 Ritz법 등을 사용하였다. 이는 블레이드가 지니고 있는 기하학적인 형상과 진동 특성이 해석적인 방법으로 해결하는 데에는 상당한 어려움이 있기 때문이다. 실제적으로는 터빈 블레이드와 같은 회전체의 진동 특성이 설치각이나 비틀림각, 판의 형상비, 회전속도 등의 변화에 의하여 영 향을 받기 때문에 보와 같은 진동 거동을 보이기보다는 판이나 셀과 같은 진동 거동을 보이므로 보다 정확한 해석을 수행하기 위해서는 해석 대상을 판이나 셀로서 취급하는 것이 타당하다. 따라서 본 연구에서는 위와 같은 이 유 때문에 해석 대상을 등방성 사각판과 직교이방성 복합재료 사각판으로 선택하였으며, 구조물의 고유진동수에 영향을 미치는 다음과 같은 인자들을 해석에 고려하였다. 1. 회전속도 (rotational speed) 2. 설치각 (setting angle) 3. 허브의 반경 (hub radius) 4. 판의 형상비 (aspect ratio) 5. 적층순서 (stacking sequence)구조물에 대한 동적실험(dynamic test)을 통하여 단기간에 동적특성을 결정하고 SDM(structure dynamic modification)이나 FRS(force response simulation)를 수행하여 임의의 좌표 공간에 대한 진동수준을 해석적으로 예측할 뿐만 아니라 구조물의 진동제어 를 위한 동적인자를 변경시킬 수 있는 정보를 제공하며 장비를 방진할 경우 신뢰성 있는 전달률을 결정할 수 있다. 실험적으로 철교, 교량이나 건물의 철골구조 및 2층 바닥 등 대,중형의 복잡한 구조물에 대항 동특성을 나타내 는 모빌리티를 결정할 경우 충격 가진 실험이 사용되는 실험장비 측면에서 나 실험을 수행하는 과정이 대체적으로 간편하다. 그러나 이 경우 대상 구조 물을 충분히 가진시킬수 있는 용량의 대형 충격기(large impact hammer)가 필요하게 된다. 이러한 동적실험은 약 길이 61m, 폭 16m의 4경간 교량에 대 하여 동적실험을 수행하여 가능성을 확인하였다. 여기서는 실험실 수준의 평 판모델을 제작하고 실제 현장에서 이루어질 수 있는 진동제어 구조물에 대 한 동적실험 및 FRS를 수행하는 과정과 동일하게 따름으로써 실제 발생할 수 있는 오차나 error를 실험실내의 차원에서 파악하여 진동원을 있는 구조 물에 대한 진동제어기술을 보유하고자 한다. 이용한 해마의 부피측정은 해마경화증 환자의 진단에 있어 육안적인 MR 진단이 어려운 제한된 경우에만 실제적 도움을 줄 수 있는 보조적인 방법으로 생각된다.ofile whereas relaxivity at high field is not affected by τS. On the other hand, the change in τV does not affect low field profile but stron

  • PDF

Epidemiologic and Clinical Comparisons of Three Measles Outbreaks in Korea(1989~2001) (국내에서 1989년부터 2001년 사이에 세 번 돌발 유행한 홍역의 역학 및 임상적 비교)

  • Yoon, Ju-Yun;Lee, Kyung-Yil;Kang, Jin-Han
    • Pediatric Infection and Vaccine
    • /
    • v.10 no.2
    • /
    • pp.223-228
    • /
    • 2003
  • Purpose : We evaluated and compared clinical and laboratory characteristics of patients with measles in three epidemics(1989~90, 1993~94, and 2000~01) in Daejeon, Korea. Methods : Retrospective analyses were performed using medical records of 520 patients with measles at the Catholic University of Korea, Daejeon St. Mary's Hospital during three epidemics. We divided the subjects into three groups, i.e., those who admitted during 1989~1990(group I, 116 patients), those during 1993~1994(group II, 127 patients), and those during 2000~2001(group III, 277 patients). We compared clinical, demographic and laboratory characteristics among these 3 groups. Results : In age distribution, ratios of under 2 years of age in three groups were 61%, 58% and 57%, respectively with no statistical differences. However there are differences in age distribution above 2 years of age, as 21% in 2~5 years of group I, 28% in 6~9 years of group II, and 21% above 10 years of group III. No statistical differences were present between 3 groups in the male to female ratio, MMR vaccination rate in above 2 years of age, duration of fever, incidence of hepatitis. Hospitalization days(P=0.019) and rate of complications(P=0.012) were longer and higher in group I than in group III. Conclusion : In three epidemics, the second peak age group(except 0~1 year) of children above 2 years of age who had mostly received MMR vaccination showed a trend for increased age with increasing time(statistical difference). This result suggest that secondary vaccine failure may have a role in each epidemics. So, if measles outbreaks is happened in the future, we will have consideration in this aspect.

  • PDF

Nodal Outcomes of Uniportal versus Multiportal Video-Assisted Thoracoscopic Surgery for Clinical Stage I Lung Cancer

  • Choi, Jung Suk;Lee, Jiyun;Moon, Young Kyu;Moon, Seok Whan;Park, Jae Kil;Moon, Mi Hyoung
    • Journal of Chest Surgery
    • /
    • v.53 no.3
    • /
    • pp.104-113
    • /
    • 2020
  • Background: Accurate intraoperative assessment of mediastinal lymph nodes is a critical aspect of lung cancer surgery. The efficacy and potential for upstaging implicit in these dissections must therefore be revisited in the current era of uniportal video-assisted thoracoscopic surgery (VATS). Methods: A retrospective study was conducted in which 544 patients with stage I (T1abc-T2a, N0, M0) primary lung cancer were analyzed. To assess risk factors for nodal upstaging and to limit any imbalance imposed by surgical choices, we constructed an inverse probability of treatment-weighted (IPTW) logistic regression model (in addition to non-weighted logistic models). We also evaluated risk factors for early locoregional recurrence using IPTW logistic regression analysis. Results: In the comparison of uniportal and multiportal VATS, the resected lymph node count (14.03±8.02 vs. 14.41±7.41, respectively; p=0.48) and rate of nodal upstaging (6.5% vs. 8.7%, respectively; p=0.51) appeared similar. Predictors of nodal upstaging included tumor size (odds ratio [OR], 1.74; 95% confidence interval [CI], 1.12-2.70), carcinoembryonic antigen level (OR, 1.11; 95% CI, 1.04-1.18), and histologically confirmed pleural invasion (OR, 3.97; 95% CI, 1.89-8.34). The risk factors for locoregional recurrence within 1 year were found to be number of resected N2 nodes, age, and nodal upstaging. Conclusion: Uniportal and multiportal VATS appear similar with regard to accuracy and thoroughness, showing no significant difference in the extent of nodal dissection.

Infant and Toddler Group Care at the Mother's Work Place (직장내 탁아프로그램 개발을 위한 기초연구 - 영·유아를 중심으로 -)

  • Zi, Heyon
    • Korean Journal of Child Studies
    • /
    • v.7 no.2
    • /
    • pp.1-15
    • /
    • 1986
  • Korea is a rapidly industrializing nation. As a consequence, more mothers are working outside the home. This trend is likely to continue into the future and raises the problem of infant-toddler care during the mother's working hours. Considering that Korea is making such rapid economic advances, quality care for children of working mothers Is not only desirable but affordable as well. Variety in options for child care is recommended by Beck (1982). Some of the alternatives in child care have been discussed elsewhere (KWDI, 1984). This paper, thus, concentrated on center-based, worksite child care. Because the human environment is the most important aspect of the center, qualified staff and a low ratio of children per staff member is Vital. Philosophy of program and its actualization ensures that the children have a worthwhile experience at the center. The physical plant houses the center and includes provision for space, materials, and equipment for staff and child use in carrying out the program. Adequate health protection is a critical factor in infant-toddler group care programs.

  • PDF

Strut-and-Tie Model for Shear Strength of Reinforced Concrete Squat Shear Walls (저층형 철근콘크리트 전단벽의 전단강도 평가를 위한 스트럿-타이 모델)

  • Mun, Ju-Hyun;Yang, Keun-Hyeok
    • Journal of the Korea Concrete Institute
    • /
    • v.27 no.6
    • /
    • pp.615-623
    • /
    • 2015
  • The previous strut-and-tie models (STMs) to evaluate the shear strength of squat shear walls with aspect ratio less than 2.0 do not consider the axial load transfer of concrete strut and individual shear transfer contribution of horizontal and vertical shear reinforcing bars in the web. To overcome the limitation of the existing models, a simple STM was established based on the crack band theory of concrete fracture mechanics. The equivalent effective width of concrete strut having a stress relief strip was determined from the neutral axis depth and effective factor of concrete strength. The shear transfer mechanism of shear reinforcement at the extended crack band zone was calculated from an internally statically indeterminate truss system. The shear transfer capacity of concrete strut and shear reinforcement was then driven using the energy equilibrium in the stress relief strip and crack band zone. The shear strength predictions of squat shear walls evaluated from the current models are in better agreement with 150 test results than those determined from STMs proposed by Siao and Hwang et al. Furthermore, the proposed STM gives consistent agreement with the observed trend of the shear strength of shear walls against different parameters.

Analysis of crown size and morphology, and gingival shape in the maxillary anterior dentition in Korean young adults

  • Song, Jae-Won;Leesungbok, Richard;Park, Su-Jung;Chang, Se Hun;Ahn, Su-Jin;Lee, Suk-Won
    • The Journal of Advanced Prosthodontics
    • /
    • v.9 no.4
    • /
    • pp.315-320
    • /
    • 2017
  • PURPOSE. The aim of this investigation was to analyze the dimensions of clinical crowns and to classify the crown and the gingival type in the anterior teeth in Korean young adults. MATERIALS AND METHODS. Casts were obtained from 50 subjects ranging in age from 24 to 32. Measurements of length and width were made on the casts using a pair of digital calipers on the entire dentition. Crown thickness and papilla height were also measured and MDW/CL (mesiodistal width to clinical length) and CW/CL (cervical width to clinical length) ratios of the maxillary anterior teeth were calculated. The K-clustering method was used for CW/CL to classify the anterior tooth shape into three groups (tapered, ovoid, and square), and one-way analysis of variance and Duncan's post-hoc comparison were used to evaluate statistical significance between the groups. Pearson's correlation analysis was performed between tooth shape and papillary height (PH) to demonstrate the correlation between tooth shape and gingival morphological characteristics. RESULTS. The average length of the maxillary central incisors was 9.89 mm; the mesio-distal width was 8.54 mm; and the ratio of width/length was 0.86 in Korean young adults. The average bucco-palatal thickness of the central incisor was 3.14 mm at the incisal 1/3 aspect. Ovoid type was the most common tooth shape (48%), followed by square type (29%) and taper type (23%) in the central incisors of Korean young adults. Tooth shape and gingival type were correlated with each other. CONCLUSION. New reference data were established for tooth size in Korean young adults and the data show several patterns of tooth shape and gingival type. Clinicians should diagnose and treat based on these characteristics for better results in the Korean population.

Review of pediatric cerebrovascular accident in terms of insurance medicine (소아뇌졸중의 보험의학적 고찰)

  • Ahn, Gye-Hoon
    • The Journal of the Korean life insurance medical association
    • /
    • v.29 no.2
    • /
    • pp.29-32
    • /
    • 2010
  • Moyamoya disease (MMD) is a progressive occlusive disease of the cerebral vasculature with particular involvement of the circle of Willis and the arteries that feed it. MMD is one of cerebrovacular accident,which is treated with sugical maeuver in pediatic neurosurgery. Moyamoya (ie, Japanese for "puff of smoke") characterizes the appearance on angiography of abnormal vascular collateral networks that develop adjacent to the stenotic vessels. The steno-occlusive areas are usually bilateral, but unilateral involvement does not exclude the diagnosis. The exact etiology of moyamoya disease is unknown. Some genetic predisposition is apparent because it is familial 10% of the time. The disease may be hereditary and multifactorial. It may occur by itself in a previously healthy individual. However, many disease states have been reported in association with moyamoya disease, including the following: 1) Immunological - Graves disease/thyrotoxicosis 2) Infections - Leptospirosis and tuberculosis 3) Hematologic disorders - Aplastic anemia, Fanconi anemia, sickle cell anemia, and lupus 4) Congenital syndromes - Apert syndrome, Down syndrome, Marfan syndrome, tuberous sclerosis, Turner syndrome, von Recklinghausen disease, and Hirschsprung disease 5) Vascular diseases - Atherosclerotic disease, coarctation of the aorta and fibromuscular dysplasia, 6)cranial trauma, radiation injury, parasellar tumors, and hypertension etc. These associations may not necessarily be causative but do warrant consideration due to impact on treatment.(Mainly neurosurgical operation.) The incidence of moyamoya disease is highest in Japan. The prevalence of MMD is 1 person per 100,000 population. The prevalence and incidence of moyamoya disease in Japan has been reported to be 3.16 cases and 0.35 case per 100,000 people, respectively. With regard to sex, the female-to-male ratio is 1.4:1. A bimodal peak of incidence is noted, with symptoms occurring either in the first decade(5-10yr) or in the third and fourth decades (30-40yr)of life. Mortality rates of moyamoya disease are approximately 10% in adults and 4.3% in children. Death is usually from hemorrhage. In aspect of life insurance, MR is 1700%, EDR is 16 per 1000 persons. Children and adults with moyamoya disease (MMD) may have different clinical presentations. The symptoms and clinical course vary widely from asymptomatic to transient events to severe neurologic deficits. Adults experience hemorrhage more commonly; cerebral ischemic events are more common in children. Children may have hemiparesis, monoparesis, sensory impairment, involuntary movements, headaches, dizziness, or seizures. Mental retardation or persistent neurologic deficits may be present. Adults may have symptoms and signs similar to those in children, but intraventricular, subarachnoid, or intracerebral hemorrhage of sudden onset is more common in adults. Recently increasing diagnosis of MMD with MRI, followed by surgical operation is noted. MMD needs to be considered as the "CI" state now in life insurance fields.

  • PDF

Prediction of NOx emission for marine gas engines (선박용 가스엔진의 NOx 배출량예측에 관한 연구)

  • Jang, Ha-Seek;Lee, Ji-Woong;Lee, Kang-Ki;Choi, Jae-Sung
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.38 no.6
    • /
    • pp.658-665
    • /
    • 2014
  • Natural gas for marine diesel engine is considered as an important and clean source of energy because of simultaneously reducing the emission of NOx, SOx and GHG. Especially with a appearance of shale gas, the using of natural gas has been investigated aggressively and expected to expand rapidly. By the reports, gas engine and diesel engine were both in a similar performance in the power aspect, and the SFOC of gas engine was shown a little better than that of diesel engine. But the characteristics of exhaust gas emission were different according to various combustion technologies. And with lean burn technology, the emission of NOx could be reduced to 85% lower than that of diesel engine. In this paper, it was described that a simulation program has been developed to predict NOx emission. The developed program is adopted two-zone model and Wiebe function for combustion in cylinder. The effects of premixed and diffusive combustion could be simulated by using the excess air ratio as input data. And it was confirmed that the results of simulation were agreed with the general trends of exhaust gas emission according to various combustion conditions such as lean burn, premixed and diffusive combustion.