• Journal of the Korean Chemical Society
• /
• v.51 no.6
• /
• pp.520-525
• /
• 2007

Three-component coupling of thiourea/urea, various structurally diverse aromatic aldehydes and ammonium acetate is catalyzed by activated fly ash in dry media under microwave irradiation to give 6-aryl-1,2,4,5-tetrazinan- 3-thiones/ones in good yields. The structure of 6-aryl-1,2,4,5-tetrazinan-3-thiones/ones have been elucidated on the basis of their melting points, elemental analysis, MS, IR, 1H NMR, D2O exchange, 13C NMR and two dimensional NMR spectral studies including Homonuclear Correlation (HOMOCOR) and Heteronuclear Single Quantum Correlation (HSQC) spectra.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.1 s.47
• /
• pp.7-14
• /
• 2006

Melting slag generated from the lots of municipal incineration ash, which causes the one of big urban problems in modern industrial society, was used as starting material for the hydrothermal synthesis of zeolite. P-type zeolite has been successfully synthesized by the combined process of both 'hydrogelation' and 'clay conversion' method. Commercial sodium silicate was used as Si source, and $NaAlO_2$ was prepared by the reaction in a $Na_{2}O/Al_{2}O_{3}$ molar ratio of 1.2. The optimum conditions for zeolite synthesis was found to be the $SiO_{2}/Al_{2}O_{3}$ ratio in the 3.2 and 4.2 range, the $H_{2}O/Na_{2}O$ ratio in the 70.7 and 80.0 range, and more than 15-hour reaction time at $80^{\circ}C$, In the synthesized zeolite, inhomogeneous melting slag particles were disappeared and homogeneous P-type zeolite crystal was grown. The cation exchange capacity of the synthesized zeolite was determined to be approx. 240 cmol/kg.

• Journal of Energy Engineering
• /
• v.21 no.4
• /
• pp.427-434
• /
• 2012

The fuel characteristics and combustion behaviors of bituminous (Anglo) and sub-bituminous (Tanito) coals used in 500MW coal fired power plant have been investigated. With ashes of those coals, the ash fusibility is characterized with thermo mechanical analyzer, and the advanced ash slagging propensity, BHEL index, has been obtained. The melting-down of tanito coal ash happened in the temperature range of 1,200 to $1,250^{\circ}C$, and for anglo coal ash it occurred near $1,550^{\circ}C$. BHEL indices for two coals gives the high slagging propensity, and these are compared with the existing traditional indices which give different tendencies.

• Resources Recycling
• /
• v.6 no.1
• /
• pp.29-34
• /
• 1997

The feasibility of using the industrial inorganic waste materials such as l~mestone sludge. Soundly sand. coal fly 'ash, and chemical glasses as a raw material for cement clinker by melting treatmeut was iovestigated. The slag wh~ch is obtained from thc melts of the mixtnres of waste materials is composed of P-C,S(ZCaO - SIOJ and C,AS(ZCaO . AI,O, . SiO,) phases. The effect of melting tempcrabre, coaling condition and CIS ratio on the fo~mation of P-C,S phasc was examed. In order to obtain thc P-CiS phase which is useful in thc utilhtion as a clinkcr malcrid, it B found that sudl considerations as low melting temperature as possible of the wastc mixhire, quenching the melts and law CIS ratio of the mlxhlre are necessary.

• Resources Recycling
• /
• v.18 no.1
• /
• pp.22-29
• /
• 2009

To design and construct a moving bed stoker incinerator for incineration treatment of the domestic oil fly ash, operating condition and moving bed area of incinerator were determined by performing incinerate experiment of the oil fly ash in the muffle furnace which simulates moving bed stoker incinerator in all conditions. Incineration process of the oil fly ash could be divided into 3 stages, every stage needs the appropriate operating condition for effective incineration. The optimum content of water in the heavy oil fly ash was found to be 20 wt% to prevent the ash from flying and reduce the volume. Science combustion rate of oil fly ash depends on the oxygen content, the incinerator must have a equipment to control the oxygen content in the combustion air. The optimum temperature was $750{\sim}800^{\circ}C$ in order to prevent adhesion to the stocker and evaporation of metal compounds of low melting point. Uniform combustion reaction and acceleration of combustion rate required agitation during the combustion of oil fly ash. The incineration rate was $12.53kg/m^2hr$ and the working area of moving bed incinerator was found to be $60m^2$ to incinerate 18 tons of oil fly ash per day.

• Korean Journal of Materials Research
• /
• v.27 no.5
• /
• pp.281-288
• /
• 2017

In this study, Fe-Ni slag, converter slag and dephosphorization slag generated from the steel industry, and fly ash or bottom ash from a power plant, were mixed at an appropriate mixing ratio and melted in a melting furnace in a mass-production process for glass ceramics. Then, glass-ceramic products, having a basalt composition with $SiO_2$, $Al_2O_3$, CaO, MgO, and $Fe_2O_3$ components, were fabricated through casting and heat treatment process. Comparison was made of the samples before and after the modification of the process conditions. Glass-ceramic samples before and after the process modification were similar in chemical composition, but $Al_2O_3$ and $Na_2O$ contents were slightly higher in the samples before the modification. Before and after the process modification, it was confirmed that the sample had a melting temperature below $1250^{\circ}C$, and that pyroxene and diopside are the primary phases of the product. The crystallization temperature in the sample after modification was found to be higher than that in the sample before modification. The activation energy for crystallization was evaluated and found to be 467 kJ/mol for the sample before the process modification, and 337 kJ/mol for the sample after the process modification. The degree of crystallinity was evaluated and found to be 82 % before the process change and 87 % after the process change. Mechanical properties such as compressive strength and bending strength were evaluated and found to be excellent for the sample after process modification. In conclusion, the samples after the process modification were evaluated and found to have superior characteristics compared to those before the modification.

• Korean Journal of Food Science and Technology
• /
• v.4 no.1
• /
• pp.1-5
• /
• 1972

This investigation was primarily carried out to establish the optimum conditions for the separation of sorbic acid, as an enzyme inhibitor, from dry mountain ash berries. The berries were crushed to $35{\sim}40\;mesh$, and leached with water to produce a reddish juice, which was concentrated to syrup after evaporation. Parasorbic acid was separated from the syrup by steam distillation in the presence of acid. In this study, the optimum experimental results for separation of parasorbic acid were obtained as follows : (1) the most applicable leaching time of the dry ash berries was about 6 hours at room temperature and less than 4 hours at $40^{\circ}C$ and (2) in steam distillation, after removal of malic acid, addition of 30 ml of sulfuric acid per 50 ml of syrup extracted from 100 g of the ash berries was very adequate. The purity of sorbic acid obtained experimentally through the isomerization technique was qualitatively examined by spectrophotometeric, paper chromatographic, and melting point measurements.

• Journal of the Korea Institute of Building Construction
• /
• v.3 no.2
• /
• pp.129-134
• /
• 2003

In this research, we used fly-ash and blast-furnace slag as substitute material of cement and fine aggregate, and we, through experiments, researched and analyzed the features of high-flowable concrete added high efficiency AE water reduction agent. The results are below. 1. Liquefaction generally presented high-slump flow value; on the other hand, partial segregation was observed in case of mixing proportion with 65 cm slump flow and above. This segregation was partially improved in accordance with mixing admixture. 2. Compressive strength according to mixing admixture and increasing mixing ratio of fly-ash were subject to be declined when it was initially cast-in, but its gap was improved when time was fully passed. 3. After mixing blast-furnace slag and fly-ash as substitute material, the result showed that the modulus of elasticity against freezing & melting was improved according to mixing blast-furnace slag and also increased in accordance with increasing pulverulent-body volume. 4. According to increasing the mixing volume of fly-ash, the durability factor was deteriorated because compressive strength became lower as well as air content was decreased when it was initially case-in. 5. The minimum air content to secure durability was 3.7%, for that reason, we had better secure admixture such as air entraining agent when cast-in high-flowable concrete.

• Fisheries and Aquatic Sciences
• /
• v.17 no.3
• /
• pp.299-304
• /
• 2014

The objective of this study was to elucidate the physicochemical characteristics of gelatin extracted from jellyfish Rhopilema hispidum. We investigated the proximate composition, amino acids, gel strength, gelling/melting points, dynamic viscoelastic properties, and viscosity of jellyfish gelatin. Jellyfish gelatin contained 12.2% moisture, 1.5% lipid, 2.1% ash, and 84.8% protein. Glycine, hydroxyproline, proline, and alanine were the predominant amino acids. The gelatin showed a gel strength of 31.2 kPa, a gelling point of $18.0^{\circ}C$, and melting point of $22.3^{\circ}C$. The gelatin was composed of ${\alpha}_1$-chain, ${\alpha}_2$-chain, ${\beta}$-chain, and ${\gamma}$-chain. During cooling and heating process, jellyfish gelatin showed lower elastic modulus (G') and loss modulus (G") values than mammalian gelatin. Jellyfish gelatin did not show superior rheological properties to mammalian gelatin, like other fish gelatin; however, it can be used in various food and cosmetic products not requiring high gel strength.

• Journal of the Korean Society of Combustion
• /
• v.14 no.4
• /
• pp.33-40
• /
• 2009

Waste Thermal Pyrolysis Melting process was proposed and has been studied in order to prevent air pollution by dioxin and fly ash generated from combustion process for disposal of waste. In this study, applicability as the fuel of diffusion burner of synthesis gas formed from Waste Thermal Pyrolysis process was addressed. Results showed that there is no big difference in the flame shape between MNDF and SNDF, and lift off was detected in MIDF but flame is more stable in SIDF which contains hydrogen with high combustion velocity as flow rate in first nozzle is increased. And radiation heat flux in inverse diffusion flame of synthesis gas was found to be more by 1.5 times than that in inverse diffusion flame of methane because of higher mole fraction of $CO_2$ with high emissivity in product gas.