• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.344-347
• /
• 2004

The amount of coal ash has been increasing and development of effective use is urgently needed. Various by-products and waste are expected to be used as resources from the point of reduction in environmental load. This is an experimental study to compare the properties of high volume coal ash concrete using the reclaimed coal ash. For this purpose, authors have started work to develop a production method of hardening coal ash concrete. Laboratory tests show that the optimum mixture of coal ash concrete can be determined from multiple regression analysis. According to test results, it was found that the compressive strength of the concrete can be determined by a single curve. And it is obtained from the analysis of the results tested for concrete with the ratio of total power to water and amount of land reclamation ash.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.142-146
• /
• 2001

This research was undertaken on the use of bottom ash as a fine aggregate in Controlled. Low-strength Material(CLSM). The mixtures contained constant fly ash. And four different level of bottom ash with fly ash contents, 25%, 50%, 75%, 100% are investigated. Mixture proportions were developed for producing CLSM at three 28-day strength levels: removal with tools (less than $7kgf/cm^{2}$), removal by mechanical means (less than $200kgf/cm^{2}$), and removal with power equipment (less than $83kgf/cm^{2}$). To obtain these strengths, cement contents of 30, 60, and $120kg/cm^{3}$ were utilized. The compressive strength properties support the concept that by-product bottom ash can be successfully used in CLSM.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.89-94
• /
• 1999

The workability of high strength concrete using high range water reducing admixture is varied rapidly according to elapsed time. For using the high strength concrete in situ, careful caution on workability is necessary. By using fly ash as a admixture, the slump loss of concrete can be reduced considerably, but the early strength of concrete used fly ash is smaller than that not used fly ash. For the purpose of elevating the utilization of fly ash on high strength concrete, the high fluidity retention and the strength development in early age are necessary in concrete used fly ash. In this study, to improve the fluidity retention and to acquire strength development on concrete used fly ash, the gypsum is applied.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.669-672
• /
• 2008

bottom ash has difficult in recycling because of low activity and unburned carbon. so our study was control the unburned carbon for improvement of bottom ash. unburned carbon was controlled by distribution. The result of distribution is good that unburned carbon of bottom ash decrease in 4.5%. when we are replace bottom ash with OPC to 10$\sim$30%, specimens strength is decrease. but mix of controlled bottom ash revealed that it's strength increase 6% better than uncontrolled bottom ash.

• Journal of Environmental Science International
• /
• v.5 no.6
• /
• pp.785-799
• /
• 1996

The incineration tests of mixed industrial wastes using the stoker type incinerator are carried out to investigate the partitioning characteristics of heavy metals during incineration. The results obtained from this study are as follow. The partitioning characteristics of heavy metals throughout this incinerator are found that, at given condition of $700^{\circ}C$, the elements with the relatively high boiling point such as Cr, Cu and Pb are partitioned into a bottom ash, a fry ash captured tv cyclone, and a flue gas stream, 67~88%, 2~19% and 6~16% of initial amount entering the incinerator, respectively, but the Cd and Hg of 75~81% is vaporized into the flue gas. It appears that the partitioning characteristics according to the particle size of ash is different between the bottom ash and the fly ash. For bottom ash, the fraction of partitioning into 75${\mu}{\textrm}{m}$ oversized particles is reatively high. For fly ash, the characteristics of distributions with the particle size can not be clearly shown.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.650-654
• /
• 2001

To utilize municipal solid waste incineration ash as useful resources in Korea, studies on the present state of production and management of incineration ash and its effects on environment were made. And, it was intended to analyze the management conditions of incineration ash in many foreign countries and reflect them in domestic incineration ash policy. Korean incineration ash policy is based on the control of waste production, considering the difficulties in securing landfills and the small size of national land, and will be changed into recycling- and incineration-centered one. Furthermore, studies on the stabilization and recycling of incineration ash should be continuously conducted to overcome the concerns about environmental pollution.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.616-620
• /
• 2001

The objectives of this study are to investigate the suitability of various coal fly ashes and incineration ashes for zeolite synthesis. Zeolite P and hydroxysodalite are produced from coal fly ash and paper sludge incineration ash. When soluble and acid-soluble materials in incineration fly ash are removed by the water washing or acid washing before hydrothermal synthesis, hydroxysodalite can be produced. The factors to make solid-liquid separation difficult are the calcium component and the unburned carbon in ash.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.296-300
• /
• 2001

In order to recycle the incineration ash (bottom ash and fly ash) generated from the incineration of municipal waste for a cement material, salts as well as heavy metal should be removed by the stabilization treatment. Most of these heavy metal and over 80% of salts are removed by a washing as a pre-treatment. However, wastewater which is another pollutant is generated by a washing, then proper treatment should be developed. First the characteristics of incineration ashes collected from two domestic full-sized incinerators were investigated and removal rate of salts and heavy metals from them also studied. The wastewater quality was compared to the criteria of the regulation by analyzing the characteristics of generated wastewater during the washing of incineration ash as a condition of liquid/solid ratio. Also, we tried to used this experimental results for the basic data to develop proper processing technique of municipal waste.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.494-499
• /
• 2001

The present work investigates the possible use of fly ash for the removal of heavy metal ions from aqueous solutions. Batch experiments were conducted and the influences of metal concentration, pH, and fly ash concentration were investigated. Heavy metals used in these studies were zinc, lead and cadmium. Adsorption studies were done over a range of pH values (3-10) at $25^{\circ}C$ and heavy metal concentrations of 10-400 mg/L using fly ash concentrations of 10, 20 and 40 g/L. Experiments were also conducted without fly ash to determine the extent of heavy metal removal by precipitation. Kinetic and equilibrium experiments were performed and adsorption data were correlated with both Langmuir and Freundlich adsorption models. The results indicate that fly ash can be used as an adsorbent for heavy metals in the aqueous solutions, yet the degree of removal depends on the pH.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.89-94
• /
• 2003

In this research, the physical properties of self compacting concrete using ground granulated blast furnace slag and fly ash as a part of cement were investigated. Concrete using ground granulated blast furnace slag and fly ash was prepared with various ground granulated blast furnace slag(30-50 volume %) and fly ash(10-20 volume %) replacement for cement. The effect of each of the materals, which have effects on self compacting concrete made by the basic mix proportion used granulated blast furnace slag and fly ash after hardening, has been checked. The workability, flowing characteristics, resistance of segregation of materals, air content, and compressive strength of concrete using ground granulated blast furnace slag and fly ash were tested and the results were compared with those of ordinary portland cement concrete. In the experiment, we acquired satisfactory results at the point of flowing characteristics and strengths of concrete using ground granulated blast furnace and slag fly ash within the replacement ratio of 65%