• Title/Summary/Keyword: As-built model

Search Result 1,728, Processing Time 0.032 seconds

A Study on the Element Technologies in Flame Arrester of End Line (선박의 엔드라인 폭연방지기의 요소기술에 관한 연구)

  • Pham, Minh-Ngoc;Choi, Min-Seon;Kim, Bu-Gi
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.25 no.4
    • /
    • pp.468-475
    • /
    • 2019
  • An end-line flame arrester allows free venting in combination with flame protection for vertical vent applications. End-line flame arresters are employed in various fields, especially in shipping. In flame arresters, springs are essential parts because the spring load and the spring's elasticity determine the hood opening moment. In addition, the spring has to work under a high-temperature condition because of the burning gas flame. Therefore, it is necessary to analyze the mechanical load and elasticity of the spring when the flame starts to appear. Based on simulations of the working process of a specific end-line flame arrester, a thermal and structural analysis of the spring is performed. A three-dimensional model of a burned spring is built using computational fluid dynamics (CFD) simulation. Results of the CFD analysis are input into a finite element method simulation to analyze the spring structure. The research team focused on three cases of spring loads: 43, 93, and 56 kg, correspondingly, at 150 mm of spring deflection. Consequently, the spring load was reduced by 10 kg after 5 min under a $1,000^{\circ}C$ heat condition. The simulation results can be used to predict and estimate the spring's load and elasticity at the burning time variation. Moreover, the obtained outcome can provide the industry with references to optimize the design of the spring as well as that of the flame arrester.

The life and academic world of 鶴皐(Hakgo) 金履萬(Kim Ee-man) (학고(鶴皐) 김이만(金履萬)의 생애와 학문세계)

  • Kim, Jong-soo
    • The Journal of Korean Philosophical History
    • /
    • no.37
    • /
    • pp.97-134
    • /
    • 2013
  • Kim Ee-man was born and grew up in Jecheon (堤川). As a government officer and a Confucian scholar belonging to Namin School, Kim Ee-man was active in the early and middle of 18th century. Kim Ee-man composed good poems since he was a child. In addition to being a good poet, Kim Ee-man later became a model government officer, who had thorough awareness on serving citizens (爲民). When he was a governor in Yangsan (梁山) county, he built an embankment for farmers by out of his own salary. The academic world of Kim Ee-man faithfully succeeded the basis of Toegyehak (退溪學) and he took Sohak (小學) as important. The reason of Kim Ee-man having established a practical guideline in the form of inscription and proverbs was also directly related to the issue of moral practice. Kim Ee-man also received the influence of ancient classic study from his teacher Lee Seo-woo (李瑞雨) and took Yookgyeong (六經, Six Classics in China) important in practice. Kim Ee-man started the study on Joojahak (朱子學, the doctrines of Chu-tzu) in later years. He became more thorough in being a public figure while reinforcing effort on differentiating the principle of heaven (天理) and human desire (人欲).

The change of Song lian's viewpoint of Literature and The Literary trend in the Late Yuan and the Early Ming dynasty (원말명초(元末明初) 문학 동향 및 송렴(宋濂) 문학관의 변화)

  • Park, Kyeong-nam
    • (The)Study of the Eastern Classic
    • /
    • no.62
    • /
    • pp.67-85
    • /
    • 2016
  • This paper review literary trend in the late Yuan and the early Ming dynasty and the position of Song lian 宋濂's literature in that time. Analyzing his literary theory chronologically, this paper were able to reveal that Song lian had falled into ancient prose of the Chin and Han dynasty for a long time. He have been symply summarized as a confucian literary man, but he could not extricate himself from ancient prose during youth and his manhood. It was only after that he met his teacher Huang jin 黃? and withdrew into the six confucian classics and began to have a view of literature based in confusian. But he still wasn't able to rid himself of the temptation of ancient prose. At the age of fifty, assisting Zhu Yuanzhang 朱元璋 in founding Ming dynasty, he's built up his own view of literature based in the Six Confucian Classics 六經, confucian scholars during the Song dynasty, ancient prose of the Tang and Song dynasty like as Hanyu 韓愈 and Ouyang Xiu 歐陽脩's works. In short, undergoing a complete transformation individually and historically through a tumultuous period of the late Yuan and the early Ming, Song lian could establish his own view of literature based in confusian and present ideological coordinates and a new model of the Ming literature.

A Study on the Priority Evaluation of the Success Factors for Digital Transformation in Maritime Transport Sector (해상운송분야의 디지털 전환 성공요인에 대한 우선순위 평가에 관한 연구)

  • Chang, Myung-Hee
    • Journal of Korea Port Economic Association
    • /
    • v.37 no.4
    • /
    • pp.103-126
    • /
    • 2021
  • The purpose of this study is described in detail as follows. First, I would like to define what digital transformation is in the maritime transport sector. Second, it is intended to derive success factors for digital transformation in the maritime transportation field by examining various preceding studies related to digital transformation. Finally, in order to derive priorities for the derived success factors, an AHP analysis model is built and an expert survey is conducted for practical experts in the maritime transportation field. Based on the survey results, we would like to provide guidelines on what factors should be considered first among the success factors of digital transformation in the maritime transportation sector. In this study, in order to derive the priority of success factors for digital transformation in the maritime transportation field, the hierarchical structure was divided into four high-level evaluation items(strategic factors, organizational culture and human factors, technology factors, and environmental factors) and 21 sub-evaluation items. A relative evaluation method of weighting items among AHP(Analytic Hierarchy Process) was applied. AHP analysis of 24 questionnaires with a consistency ratio of 0.1 or less in order to increase the accuracy of information among questionnaires collected through maritime transportation related university professors, research groups, shipping companies, container terminals, and experts engaged in shipping related IT companies was carried out. As a result of the analysis, the priority of the first-tier factors for the success factors of digital transformation in the maritime transport sector was shown in the order of strategic factors, organizational culture and human factors, technology factors, and environmental factors. In addition, when looking at the priorities of 21 detailed items, it was found that the development of new business models, the creation of an active future digital strategy, and the leadership of the chief digital officer were high.

A study of artificial neural network for in-situ air temperature mapping using satellite data in urban area (위성 정보를 활용한 도심 지역 기온자료 지도화를 위한 인공신경망 적용 연구)

  • Jeon, Hyunho;Jeong, Jaehwan;Cho, Seongkeun;Choi, Minha
    • Journal of Korea Water Resources Association
    • /
    • v.55 no.11
    • /
    • pp.855-863
    • /
    • 2022
  • In this study, the Artificial Neural Network (ANN) was used to mapping air temperature in Seoul. MODerate resolution Imaging Spectroradiomter (MODIS) data was used as auxiliary data for mapping. For the ANN network topology optimizing, scatterplots and statistical analysis were conducted, and input-data was classified and combined that highly correlated data which surface temperature, Normalized Difference Vegetation Index (NDVI), Enhanced Vegetation Index (EVI), time (satellite observation time, Day of year), location (latitude, hardness), and data quality (cloudness). When machine learning was conducted only with data with a high correlation with air temperature, the average values of correlation coefficient (r) and Root Mean Squared Error (RMSE) were 0.967 and 2.708℃. In addition, the performance improved as other data were added, and when all data were utilized the average values of r and RMSE were 0.9840 and 1.883℃, which showed the best performance. In the Seoul air temperature map by the ANN model, the air temperature was appropriately calculated for each pixels topographic characteristics, and it will be possible to analyze the air temperature distribution in city-level and national-level by expanding research areas and diversifying satellite data.

Analysis of Transfer Learning Effect for Automatic Dog Breed Classification (반려견 자동 품종 분류를 위한 전이학습 효과 분석)

  • Lee, Dongsu;Park, Gooman
    • Journal of Broadcast Engineering
    • /
    • v.27 no.1
    • /
    • pp.133-145
    • /
    • 2022
  • Compared to the continuously increasing dog population and industry size in Korea, systematic analysis of related data and research on breed classification methods are very insufficient. In this paper, an automatic breed classification method is proposed using deep learning technology for 14 major dog breeds domestically raised. To do this, dog images are collected for deep learning training and a dataset is built, and a breed classification algorithm is created by performing transfer learning based on VGG-16 and Resnet-34 as backbone networks. In order to check the transfer learning effect of the two models on dog images, we compared the use of pre-trained weights and the experiment of updating the weights. When fine tuning was performed based on VGG-16 backbone network, in the final model, the accuracy of Top 1 was about 89% and that of Top 3 was about 94%, respectively. The domestic dog breed classification method and data construction proposed in this paper have the potential to be used for various application purposes, such as classification of abandoned and lost dog breeds in animal protection centers or utilization in pet-feed industry.

Regenerating Condition Optimization of NGCC Combined Carbon Capture Process Simultaneously Considering Absorption and Regeneration Rates (흡수율과 재생율을 동시 고려한 천연가스복합발전 공정 연계 이산화탄소 포집 공정의 재생 조건 최적화)

  • Jeong Hun Choi;Young-Hwan Chu
    • Korean Chemical Engineering Research
    • /
    • v.61 no.3
    • /
    • pp.368-377
    • /
    • 2023
  • Natural Gas Combined Cycle(NGCC) recently receives lots of attention as an attractive form of power plants by virtue of its low carbon emission compared with coal-fired power plant. Nevertheless, it also needs carbon capture process since it is difficult to completely suppress carbon emission even for the NGCC. A simulation study has been performed to optimize operating condition of a carbon capture process using MEA considering low partial pressure of carbon dioxide in NGCC emission gas. For accurate optimization, overall process model including both NGCC and the carbon capture process has been built with a simulation software. Then, optimization in which various performance indices such as carbon dioxide absorption rate, solvent regeneration rate and power loss in the NGCC are simultaneously reflected has been done. Especially, it is noticeable that this study focuses on not only the amount of energy consumption but also the absorption and regeneration performance of carbon capture process. The best result considering all the performance indices has been achieved when the reboiler temperature is 120 ℃ and the reason has been analyzed.

A Groundwater Potential Map for the Nakdonggang River Basin (낙동강권역의 지하수 산출 유망도 평가)

  • Soonyoung Yu;Jaehoon Jung;Jize Piao;Hee Sun Moon;Heejun Suk;Yongcheol Kim;Dong-Chan Koh;Kyung-Seok Ko;Hyoung-Chan Kim;Sang-Ho Moon;Jehyun Shin;Byoung Ohan Shim;Hanna Choi;Kyoochul Ha
    • Journal of Soil and Groundwater Environment
    • /
    • v.28 no.6
    • /
    • pp.71-89
    • /
    • 2023
  • A groundwater potential map (GPM) was built for the Nakdonggang River Basin based on ten variables, including hydrogeologic unit, fault-line density, depth to groundwater, distance to surface water, lineament density, slope, stream drainage density, soil drainage, land cover, and annual rainfall. To integrate the thematic layers for GPM, the criteria were first weighted using the Analytic Hierarchical Process (AHP) and then overlaid using the Technique for Ordering Preferences by Similarity to Ideal Solution (TOPSIS) model. Finally, the groundwater potential was categorized into five classes (very high (VH), high (H), moderate (M), low (L), very low (VL)) and verified by examining the specific capacity of individual wells on each class. The wells in the area categorized as VH showed the highest median specific capacity (5.2 m3/day/m), while the wells with specific capacity < 1.39 m3/day/m were distributed in the areas categorized as L or VL. The accuracy of GPM generated in the work looked acceptable, although the specific capacity data were not enough to verify GPM in the studied large watershed. To create GPMs for the determination of high-yield well locations, the resolution and reliability of thematic maps should be improved. Criterion values for groundwater potential should be established when machine learning or statistical models are used in the GPM evaluation process.

Ensemble of Nested Dichotomies for Activity Recognition Using Accelerometer Data on Smartphone (Ensemble of Nested Dichotomies 기법을 이용한 스마트폰 가속도 센서 데이터 기반의 동작 인지)

  • Ha, Eu Tteum;Kim, Jeongmin;Ryu, Kwang Ryel
    • Journal of Intelligence and Information Systems
    • /
    • v.19 no.4
    • /
    • pp.123-132
    • /
    • 2013
  • As the smartphones are equipped with various sensors such as the accelerometer, GPS, gravity sensor, gyros, ambient light sensor, proximity sensor, and so on, there have been many research works on making use of these sensors to create valuable applications. Human activity recognition is one such application that is motivated by various welfare applications such as the support for the elderly, measurement of calorie consumption, analysis of lifestyles, analysis of exercise patterns, and so on. One of the challenges faced when using the smartphone sensors for activity recognition is that the number of sensors used should be minimized to save the battery power. When the number of sensors used are restricted, it is difficult to realize a highly accurate activity recognizer or a classifier because it is hard to distinguish between subtly different activities relying on only limited information. The difficulty gets especially severe when the number of different activity classes to be distinguished is very large. In this paper, we show that a fairly accurate classifier can be built that can distinguish ten different activities by using only a single sensor data, i.e., the smartphone accelerometer data. The approach that we take to dealing with this ten-class problem is to use the ensemble of nested dichotomy (END) method that transforms a multi-class problem into multiple two-class problems. END builds a committee of binary classifiers in a nested fashion using a binary tree. At the root of the binary tree, the set of all the classes are split into two subsets of classes by using a binary classifier. At a child node of the tree, a subset of classes is again split into two smaller subsets by using another binary classifier. Continuing in this way, we can obtain a binary tree where each leaf node contains a single class. This binary tree can be viewed as a nested dichotomy that can make multi-class predictions. Depending on how a set of classes are split into two subsets at each node, the final tree that we obtain can be different. Since there can be some classes that are correlated, a particular tree may perform better than the others. However, we can hardly identify the best tree without deep domain knowledge. The END method copes with this problem by building multiple dichotomy trees randomly during learning, and then combining the predictions made by each tree during classification. The END method is generally known to perform well even when the base learner is unable to model complex decision boundaries As the base classifier at each node of the dichotomy, we have used another ensemble classifier called the random forest. A random forest is built by repeatedly generating a decision tree each time with a different random subset of features using a bootstrap sample. By combining bagging with random feature subset selection, a random forest enjoys the advantage of having more diverse ensemble members than a simple bagging. As an overall result, our ensemble of nested dichotomy can actually be seen as a committee of committees of decision trees that can deal with a multi-class problem with high accuracy. The ten classes of activities that we distinguish in this paper are 'Sitting', 'Standing', 'Walking', 'Running', 'Walking Uphill', 'Walking Downhill', 'Running Uphill', 'Running Downhill', 'Falling', and 'Hobbling'. The features used for classifying these activities include not only the magnitude of acceleration vector at each time point but also the maximum, the minimum, and the standard deviation of vector magnitude within a time window of the last 2 seconds, etc. For experiments to compare the performance of END with those of other methods, the accelerometer data has been collected at every 0.1 second for 2 minutes for each activity from 5 volunteers. Among these 5,900 ($=5{\times}(60{\times}2-2)/0.1$) data collected for each activity (the data for the first 2 seconds are trashed because they do not have time window data), 4,700 have been used for training and the rest for testing. Although 'Walking Uphill' is often confused with some other similar activities, END has been found to classify all of the ten activities with a fairly high accuracy of 98.4%. On the other hand, the accuracies achieved by a decision tree, a k-nearest neighbor, and a one-versus-rest support vector machine have been observed as 97.6%, 96.5%, and 97.6%, respectively.

RAUT: An end-to-end tool for automated parsing and uploading river cross-sectional survey in AutoCAD format to river information system for supporting HEC-RAS operation (하천정비기본계획 CAD 형식 단면 측량자료 자동 추출 및 하천공간 데이터베이스 업로딩과 HEC-RAS 지원을 위한 RAUT 툴 개발)

  • Kim, Kyungdong;Kim, Dongsu;You, Hojun
    • Journal of Korea Water Resources Association
    • /
    • v.54 no.12
    • /
    • pp.1339-1348
    • /
    • 2021
  • In accordance with the River Law, the basic river maintenance plan is established every 5-10 years with a considerable national budget for domestic rivers, and various river surveys such as the river section required for HEC-RAS simulation for flood level calculation are being conducted. However, river survey data are provided only in the form of a pdf report to the River Management Geographic Information System (RIMGIS), and the original data are distributedly owned by designers who performed the river maintenance plan in CAD format. It is a situation that the usability for other purposes is considerably lowered. In addition, when using surveyed CAD-type cross-sectional data for HEC-RAS, tools such as 'Dream' are used, but the reality is that time and cost are almost as close as manual work. In this study, RAUT (River Information Auto Upload Tool), a tool that can solve these problems, was developed. First, the RAUT tool attempted to automate the complicated steps of manually inputting CAD survey data and simulating the input data of the HEC-RAS one-dimensional model used in establishing the basic river plan in practice. Second, it is possible to directly read CAD survey data, which is river spatial information, and automatically upload it to the river spatial information DB based on the standard data model (ArcRiver), enabling the management of river survey data in the river maintenance plan at the national level. In other words, if RIMGIS uses a tool such as RAUT, it will be able to systematically manage national river survey data such as river section. The developed RAUT reads the river spatial information CAD data of the river maintenance master plan targeting the Jeju-do agar basin, builds it into a mySQL-based spatial DB, and automatically generates topographic data for HEC-RAS one-dimensional simulation from the built DB. A pilot process was implemented.