• Journal of Environmental Health Sciences
• /
• v.27 no.2
• /
• pp.145-152
• /
• 2001

The purpose of this study was to determine nitrogen dioxide(NO$_2$) decay rate by reaction between NO$_2$ and interior materials in Korean residence. The results of this research could be helpful to choose the interior construction materials and to study on reduction of indoor air pollutants. The results of this research are as follows; For 30 residences in Seoul and Incheon from October 2000 to march 2001, the mean of infiltration rate was 0.70$\pm$0.44 ACH, and single-detached houses (7 houses) and apartments (19 houses) were 0.97$\pm$0.55 ACH and 0.61$\pm$0.34 ACH, respectively. The $CO_2$ decay followed approximately first-order process ($R^2$=0.97$\pm$0.02). There existed a statistic significance in filtration rate between houses built in 1980’s and built in 1990’s by t-test (p<0.02). Mean of NO$_2$ decay rates in 26 residence3s except 4 residences was 0.94$\pm$0.49hr$^{-1}$ , and also 0.86$\pm$0.49hr$^{-1}$ , 0.97$\pm$0.50hr$^{-1}$ in single-detached houses and apartments, respectively. Mean NO$_2$ decay rates in houses built in 1980’s were 0.78$\pm$0.37hr$^{-1}$ , 1.33$\pm$1.03hr$^{-1}$ , respectively. Nothing were showed statistical significance among indoor temperature, indoor humidity, and NO$_2$ decay rate. However, NO$_2$ decay rates had a tendency to increase by increase of temperature and humidity. Average volume/surface of participated houses was 0.55$\pm$0.07m and mean NO$_2$ deposition velocity was calculated as 1.46$\pm$0.59msec$^{-1}$ .

• Knowledge Management Research
• /
• v.19 no.4
• /
• pp.149-170
• /
• 2018

Healthcare lifelog, a personal record relating to disease treatment and healthcare, plays an important role in healthcare paradigm shifts in which medical and information technology converge. Healthcare services based on various healthcare lifelogs are being launched domestically by both large corporations and small and medium enterprises, however, they are being built on an individual platform that is dependent on each company. Therefore, the terms of lifelog data are different as well as the measurement specifications are not uniform. This study proposes a reference model for minimum common data required for sharing and utilization of healthcare lifelog. Literature study and expert survey derived 3 domain, 17 essential items, and 51 sub-items. The model provides definition, measurement data format, measurement method, and precautions for each detailed measurement item, and provides necessary guidelines for data and service design and construction for healthcare service. This study has its significance as a basic research supporting the activation of ecosystem by ensuring interoperability of data between heterogeneous healthcare devices linked to digital healthcare platform.

• KIEAE Journal
• /
• v.11 no.4
• /
• pp.11-18
• /
• 2011

In order to solve housing shortage, an apartment has been built and supplied in large quantities in Korea. As such a result, the apartment became a typical housing type in Korea. However, the housing became vulnerable to accommodate rapidly changing life-style & life-cycle of koreans and was lost the concept of Korean traditional housing for inheriting and developing Korean traditional culture. Therefore, this paper aims at eliciting of design elements for development on standard model of long-life housing with durability & flexibility based on data derived from housing consumers's questionnaire survey and expert's opinion surveys. We expect that the standard model developed on the basis of open building applying support & infill elements will be used as a standard model for planning future long-life housing with capacity.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.3 no.2
• /
• pp.75-90
• /
• 1978

The objective of this paper is to demonstrate how System Dynamics Approach may be used to develop new ways of analyzing and projecting manpower requirements and resources. For this purpose, a System Dynamics Model is presented as an example. An examination of the model will show that a System Dynamics modeling approach is an innovative and useful tool for manpower policy analysis and planning. Second, with minor modifications, the model may be used for manpower policy analysis and planning for any skilled personnel in Korea. For example, a similar model nay be built for engineers to analyze the effects of alternative policies about engineering education, sur as the number of available places in the various institutions of training, scholarships and loans, and the duration of training. An engineer's model may also be used to make the projections of the supply and requirements of engineers in the future according to various alternative assumptions where each assumption represents a policy option.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.2B no.4
• /
• pp.156-161
• /
• 2002

This paper proposes an optimized universal motor for improving its performance using the finite element method (FEM) with the (1＋1) Evolution Strategy (ES) algorithm. To do this, various design parameters are modified, such as air gap length, shape of motor slot, pole shoe, pole width, and rotor shaft diameter. Two parameters (arc length of stator pole and thickness of pole shoe) are chosen and optimized using the program, and the optimized model is built and tested with a performance measuring system. The measured values of the model are compared with those of the initial and the optimized model to prove the algorithm. As a result, the final model improves its performance compared with those of the initial model.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.674-675
• /
• 2015

A 3D indoor model becomes an indiscernible component of BIM (Building Information Modeling) and GIS (Geographic Information System). However, a huge amount of time and human resources are inevitable for collecting spatial measurements and creating such a 3D indoor model. Also, a varied forms of 3D indoor models exist depending on their purpose of use. Thus, in this study, three different 3D indoor models are defined as 1) omnidirectional images, 2) a 3D realistic model, and 3) 3D indoor as-built model. A series of reconstruction methods is then introduced to construct each type of 3D indoor models: they are an omnidirectional image acquisition method, a hybrid surveying method, and a terrestrial LiDAR-based method. The reconstruction methods are applied to a large and complex atrium, and their 3D modeling results are compared and analyzed.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.4
• /
• pp.145-154
• /
• 2001

This paper deals with a network model for the efficient transportation of post and consists of the formulation based on the network model and the LINGO programming model including the operations of the post transportation. This network model is represented by using Time Space Network. The generalized formulation is built up with the input variables and the decision variables, which are defined on the basis of the network model. And LINGO programming model to be proposed with DB and LINGO is constructed in consideration of how to manage the post transportation and the intermodal transport. The results of the model implementation were represented on Time Space Network and they are analyzed and verified. The LINGO programming model is used as the module to be set in application software. Specifically with using GEOmania, GIS tool, the LINGO Model is applied to develop the application for Mail Transportation Decision Support System.

• Journal of Korean Academy of Nursing
• /
• v.34 no.6
• /
• pp.954-963
• /
• 2004

Purpose: This study was designed to identify the variables affecting male adolescents' sexual intercourse through a comprehensive analysis of individual and environmental factors. Method: The subjects of this descriptive survey on causal relations were 462 subjects enrolled in liberal and vocational high schools selected on a convenience sampling basis. The data collected from May-July 2002 was put to logistic regression analysis to build a forecast model. Findings: 1) Individual factors such as school record, experience seeking, non-inhibition and sexual permissiveness, 2) family factors such as parental living arrangement, 3) school factors such as career tract and 4) peer factors such as having a boy/girl friend were identified as significant variables forecasting sexual intercourse. Conclusion and Recommendation: The theoretical model built on the basis of the major findings of this study will hopefully help promote a wholesome youth culture related to sexual intercourse. It is recommended that a program be developed that can help control the variables identified in this study along with a follow-up study to verify the model.

• Korean Institute of Interior Design Journal
• /
• no.33
• /
• pp.106-114
• /
• 2002

Through the computer simulation of virtual reality techniques, prospective clients can experience the surroundings such as the view, traffic and convenience facilities in advance. Also, consumers can reflect their own tastes in the real apartment Interior construction through their own work in relation to furniture arrangement, color choices, etc. inside the apartments. The virtual model house not only replaces the function of the existing model house but it can also provide some services that could not be provided easily due to some restrictions under real conditions. More, it can provide a precise view of the outside appearance and surrounding environment as well as inside the house, as virtual structures on the computer. Consumers can search for the information through the Web in advance and consumer-satisfaction type of apartments can be built. For this purpose, smooth communications among the designers, server managers, and consumers should be achieved as a prerequisite to the delivery of the necessary information.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.2
• /
• pp.10-18
• /
• 1997

This paper presents the development of real-time estimation and control details for a computer vision-based robot control method. This is accomplished using a sequential estimation scheme that permits placement of these points in each of the two-dimensional image planes of monitoring cameras. Estimation model is developed based on a model that generalizes know 4-axis Scorbot manipulator kinematics to accommodate unknown relative camera position and orientation, etc. This model uses six uncertainty-of-view parameters estimated by the iteration method. The method is tested experimentally in two ways : First the validity of estimation model is tested by using the self-built test model. Second, the practicality of the presented control method is verified in performing 4-axis manipulator's assembly task. These results show that control scheme used is precise and robust. This feature can open the door to a range of application of multi-axis robot such as deburring and welding.