• Title/Summary/Keyword: As-Deposited Zone

Search Result 90, Processing Time 0.026 seconds

Analysis of Geochemical Characteristics in the Intertidal Zone of Hyung-Do, Shi-Hwa Lake (시화호 형도 갯벌의 지화학적 특성 분석)

  • Lee, Jun-Ho;Jeong, Kap-Sik;Woo, Han-Jun;Cho, Jin-Hyung;Lee, Seung-Yong;Jang, Seok
    • Journal of Wetlands Research
    • /
    • v.13 no.2
    • /
    • pp.243-263
    • /
    • 2011
  • In order to understand the sedimentary environment of the southern intertidal zone of Shihwa Lake, west coast of Gyeonggi-do, 10 surface and 2 core sediment samples were analysed for grain size, water content, AVS (Acid Volatile Sulfide), TOC (Total Organic Carbon), concentrations of metals (Al, Fe, Mn, Cu, As, Pb, Zn, Ni, Cd, and Cr). The surface sediments are generally poorly sorted (0.60~2.31 ${\phi}$) sandy Silt, slightly gravelly muddy Sand, silty Sand, Sand with mean grain size of 2.95 to 6.00 ${\phi}$. The sediments contain Al (1.54%), Fe (1.75%), Cu (9.1ppm), As (1.1ppm), Pb (18.8 ppm), Ni (11.0 ppm), Cd (0.02 ppm), and Cr (30.1 ppm) on the average. Heavy metals are concentrated less than ERL (Effect Range-Low), verified by NOAA (National Oceanic and Atmospheric Administration). In the core sediments, they are also less than the ERL. Based on the uniform vertical distribution of excess radioactivity of $^{210}Pb$, the core sediments seen to have been actively mixed biologically or rapidly deposited after the construction of Shi-Hwa Seawall. The 'enrichment factor' of metals, normalized to Al, shows that the upper sediments of 35 cm in depth are more polluted. infect was significant in 2 core sediment samples in 35 cm below layer.

Silty Tidal Rhythmites from the Upper Pleistocene Sedimentary Sequence, Western Coast of Korea

  • Park, Yong-Ahn;Choi, Kyung-Sik
    • Journal of the korean society of oceanography
    • /
    • v.33 no.3
    • /
    • pp.71-79
    • /
    • 1998
  • Silty tidal rhythmites were found from the upper Pleistocene sequence unconformably overlain by the Holocene tidal deposits within the macrotidal coastal zone of Youngjong Island, western coast of Korea. The rhythmites occur as vertically accreted, parallel and planar laminae that are 0.1-2.5 mm in thickness. Each lamina grades from coarse silt (mean grain size: 5-6.5 ${\phi}$) at the lower part into fine silt to mud (mean grain size: 6-7.5 ${\phi}$) at the upper part. The rhythmites can be classified into two types based on the patterns in laminar thickness variation. Type I is a bundle of 12-20 laminae in which laminar thickness varies sinusoidally. Type ll is an alternation of thick and thin laminae as a couplet. Type I is inferred as a product of varying tidal energy during a semimonthly (neap-spring) tidal cycle, in which thicker laminae were deposited during spring tides and thinner laminae were formed during neap tides. Type ll is interpreted to have been formed by asymmetric semidiurnal tidal currents in association with diurnal inequality, whereby thick lamina of each couplet represents dominant tidal current and the thin lamina reflects subordinate tidal current.

  • PDF

Accurate Delimitation of Phanerochaete chrysosporium and Phanerochaete sordida by Specific PCR Primers and Cultural Approach

  • Lim, Young-Woon;Baik, Keun-Sik;Chun, Jong-Sik;Lee, Kang-Hyun;Jung, Won-Jin;Bae, Kyung-Sook
    • Journal of Microbiology and Biotechnology
    • /
    • v.17 no.3
    • /
    • pp.468-473
    • /
    • 2007
  • White rot fungi, Phanerochaete chrysosporium and Phanerochaete sordida, have been mostly studied in a variety of industrial processes like biopulping and pulp bleaching as well as in bioremediation. Whereas P. sordida is widely distributed in the North Temperate Zone, P. chrysosporium is reported in the restricted area and hundreds of reports have been described from a few strains of P. chrysosporium, which are deposited at various fungal collections in the world. The isolates of two species are not easily discriminated because of their morphological and molecular similarity. Through the ITS sequence analyses, a region containing substantial genetic variation between the two species was identified. PCR amplification using two specific primers was successfully used to differentiate P. chrysosporium from P. sordida. These results were supported by cultural studies. The growth rates at $37^{\circ}C$ on PDA, MEA, and Cza and the microscopic features of conidia on PDA and YMA were also very useful to differentiate those two species.

Geology of Nogsan National Industrial Engineering Estate (녹산국가공단 조성지 일대의 토목 지질)

  • 안명석;김종대
    • Explosives and Blasting
    • /
    • v.18 no.3
    • /
    • pp.99-106
    • /
    • 2000
  • The geology of Nogsan industrial estate area, Pusan, Korea consists mainly of andesitic rocks, rhyolitic rocks and hornblende granite. They are then intruded by basic and acidic dikes. All of the igneous activities in this area are in Cretaceous time, that is the lower part of Silla group in Gyoungsang basin. Andesitic volcanic rocks are distributed in two separate basines: Saengok basin and Doodong basin. Although both basines contain andesite and andesitic breccia(Kab), younger andesitic activity was more active to the western Doodong basin giving very little influence on the eastern Saengok basin. Sediments in the area are quarternaly alluvium and colluvium. Alluvium is very thick and consists mainly of silt and clay deposited as delta deposits at the mouth of Nakdong river. Colluvium in the area is short distributary channel deposits. The area is largely filled with socks and sediments to build industrial estates especially on the delta deposits at Shinhodong area and on the shoreline mud bed between Yongwondong and Shinhodong. A careful investigation to avoid the possibility of a large scale mud flow is suggested because it could be trigered by many reason such as an earthquake or a flood on the land where a heavily loaded salt-water may soaked into the muddy bed lying on the granitic basement gently dipping toward the ocean. Althouth the area is in the Yangsan fault zone no ground evidence of fault can be seen despite the RESTEC sattlite image gives excelent traces of linearments in the area.

  • PDF

Reconstruction of the Paleo-environment during the Upper Pleistocene at Seongjeong-dong, Cheonan-si, inferred from Pollen Analysis (천안 성정동 지역의 화분분석 결과를 통한 Pleistocene 후기 고환경복원)

  • Kim, Hye-Ryung;Yoon, Soon-Ock;Hwang, Sang-Ill;Lee, Byeong-Cheol
    • Journal of the Korean Geographical Society
    • /
    • v.47 no.2
    • /
    • pp.179-192
    • /
    • 2012
  • Paleo-environments such as vegetation and climate changes from the Last Glacial Maximum to the Holocene are reconstructed by the results of pollen analysis in the floodplain of Cheonan River, Seongjeong-dong, Cheonan-si, Chungnam Province. In the pollen zone I (approximately 23,000-15,000 yr BP), the area studied was covered by the extensive grassland with sparse wood. The climatic conditions were very cold, but it might not be so severe compared to the intermontane area in the Yeongnam area. This zone corresponds to the 'very cold' stage of Woldstedt(1962) and Yoon and Jo(1996). No pollen horizon(pollen zone II) deposited between approximately 15,000 and 10,000 yr BP corresponds to the transitional stage from the Last Glacial Maximum to the Holocene. The horizon consists of the dark gray brown sand deposits different from the other horizons dominated by the silty deposits and these sedimentary properties may be attributed to the dramatic climate changes between the very cold stage and warm stage. The pollen zone III formed between approximately 10,000 and 6,000 yr BP shows clearly different pollen compositions indicative of temperate climate conditions.

  • PDF

Effects of Process Variables on the Microstructure and Gas Sensing Characteristics of Magnetron Sputtered $\textrm{SnO}_2$Thin Films (마그네트론 스퍼터링 증착 조건에 따른 $\textrm{SnO}_2$ 박막의 미세구조와 가스검지특성 변화)

  • Kim, Jong-Min;Moon, Jong-Ha;Lee, Byung-Teak
    • Korean Journal of Materials Research
    • /
    • v.9 no.11
    • /
    • pp.1083-1087
    • /
    • 1999
  • Microstructures and the gas-sensing characteristics of the $\textrm{SnO}_2$ thin films were studied, which were deposited at various conditions (rf power, sample temperature, $\textrm{O}_2$/Ar ratio) by the rf magnetron sputtering. As a result, six typical microstructures were derived, such as amorphous(A), amorphous mixed with polycrystalline grains (A+P), polycrystalline with random crystalographic orientation (P), fine columnar (FC), coarse columnar (CC) and Zone T (T) with dense fiberous structure. Typically, A, A+ P, and P structures were formed when no $\textrm{O}_2$ was added to the sputter gas, whereas FC, CC, and T structures were obtained when $\textrm{O}_2$ was added. The A structure formed at low rf power and low temperature, the A+P at high rf power and low temperature, and the P at high rf power and high temperature. The FC structure was obtained at low rf power and low temperature. the CC at low rf power and high temperature, and the T at high rf power and low temperature. Results of the gas-sensing test of the sensor chips fabricated from the typical films indicated that the fine columnar microstructure shows the highest sensitivity both at $300^{\circ}C$ and $400^{\circ}C$. It was proposed that this is due to the high specific surface area of the micro-columns.

  • PDF

Selective Ablation of Emissive Polymer Using Nanosecond-pulsed Laser (나노초 펄스 레이저를 이용한 발광폴리머 패터닝)

  • Ko, J.S.;Oh, B.K.;Kim, D.Y.;Lee, J.Y.;Lee, S.K.;Jung, S.H.;Hong, S.K.
    • Laser Solutions
    • /
    • v.14 no.3
    • /
    • pp.7-11
    • /
    • 2011
  • As an active emission display using emissive polymer has had much attention recently, needs for a selective patterning of emissive layer for those displays have been increased abruptly. Therefore, the various laser sources in terms of its wavelength has been used for laser direct patterning. In this work, the feasibility of those processes is examined using numerical analysis and the experimental investigation. A sample has multi-layered structure, emissive polymer on aluminum which is deposited on a glass substrate. Key factors for optimizing the laser patterning of the emissive polymer are considered into the control of ablation products, large-sized particle, and the choice of the appropriate wavelength for minimizing the heat affected zone and the remnant layer.

  • PDF

Design and Fabrication of Movable Micro-Fersnel Lens on XY-stage (XY-Stage에 의해 정적인 변위를 갖는 미세 프레넬 렌즈(Micro-Fresnel Lens)의 설계 및 제작)

  • Kim, Che-Heung;Ahn, Si-Hong;Lim, Hyung-Taek;Kim, Yong-Kweon
    • Proceedings of the KIEE Conference
    • /
    • 1998.07g
    • /
    • pp.2515-2517
    • /
    • 1998
  • The micro fresnel lens(MFL) was modeled and fabricated on a XY-stage electrostatically driven by comb actuator. The modeled MFL was approximated as a step shape with 4-phase and 4-zone plate. The focal length and diameter of the MFL is 20mm and 912${\mu}m$, respectively. The XY-stage suspending the MFL is designed to generate a large static displacement up to about 20${\mu}m$. On SOI substrates, we first fabricated MFL using the RIE(reactive Ion etching) technology and then patterned and etched bulk silicon to make XY-stage. After the fabrication of all structures on top side of the SOI substrates. $Si_3N_4$ was deposited for passivation of all structures using PECVD(plasma enhanced chemical vapor deposition). All the MFL systems width comb drive actuator were released by KOH etching from the bottom side of the SOI wafer using double-sided alignment technique. In fabrication of MFL, a dry etching conditions is established in order to improve surface roughness and to control the etched depth.

  • PDF

Investigation into the Effects of Process Parameters of DED Process on Deposition and Residual Stress Characteristics for Remanufacturing of Mechanical Parts (기계 부품 재제조를 위한 DED 공정 조건에 따른 적층 및 잔류응력 특성 분석)

  • Kim, D.A.;Lee, K.K.;Ahn, D.G.
    • Transactions of Materials Processing
    • /
    • v.30 no.3
    • /
    • pp.109-118
    • /
    • 2021
  • Recently, there has been an increased interest in the remanufacturing of mechanical parts using metal additive manufacturing processes in regards to resource recycling and carbon neutrality. DED (directed energy deposition) process can create desired metallic shapes on both even and uneven substrate via line-by-line deposition. Hence, DED process is very useful for the repair, retrofit and remanufacturing of mechanical parts with irregular damages. The objective of the current paper is to investigate the effects DED process parameters, including the effects of power and the scan speed of the laser, on deposition and residual stress characteristics for remanufacturing of mechanical parts using experiments and finite element analyses (FEAs). AISI 1045 is used as the substrate material and the feeding powder. The characteristic dimensions of the bead shape and the heat affected zone (HAZ) for different deposition conditions are obtained from the experimental results. Efficiencies of the heat flux model for different deposition conditions are estimated by the comparison of the results of FEAs with those of experiments in terms of the width and the depth of HAZ. In addition, the influence of the process parameters on residual stress distributions in the vicinity of the deposited region is investigated using the results of FEAs. Finally, a suitable deposition condition is predicted in regards to the bead formation and the residual stress.

Lithologic and Structural Controls and Geochemistry of Uranium Deposition in the Ogcheon Black-Slate Formation (옥천대(沃川帶) 우라늄광층(鑛層)의 구조규제(構造規制) 및 지구화학적(地球化學的) 특성연구(特性硏究))

  • Lee, Dai Sung;Yun, Suckew;Lee, Jong Hyeog;Kim, Jeong Taeg
    • Economic and Environmental Geology
    • /
    • v.19 no.spc
    • /
    • pp.19-41
    • /
    • 1986
  • Structural, radioactive, petrological, petrochemical, mineralogical and stable isotopic study as well as the review of previous studies of the uranium-bearing slates in the Ogcheon sequence were carried out to examine the lithological and structural controls, and geochemical environment in the uranium deposition in the sequence. And the study was extended to the coal-bearing formation (Jangseong Series-Permian) to compare the geochemical and sedimentologic aspects of uranium chemistry between Ogcheon and Hambaegsan areas. The results obtained are as follows: 1. The uranium mineralization occurs in the carbonaceous black slates of the middle to lower Guryongsan formation and its equivalents in the Ogcheon sequence. In general, two or three uranium-bearing carbonaceous beds are found with about 1 to 1.5km stratigraphic interval and they extend from Chungju to Jinsan for 90km in distance, with intermittent igneous intrusions and structural Jisturbances. Average thickness of the beds ranges from 20 to 1,500m. 2. These carbonaceous slate beds were folded by a strong $F_1$-fold and were refolded by subsequent $F_1$-fold, nearly co-axial with the $F_1$, resulting in a repeated occurrence of similar slate. The carbonaceous beds were swelled in hing zones and were shrinked or thined out in limb by the these foldings. Minor faulting and brecciation of the carbonaceous beds were followed causing metamorphism of these beds and secondary migration and alteration of uranium minerals and their close associations. 3. Uranium-rich zones with high radioactive anomalies are found in Chungju, Deogpyong-Yongyuri, MiwonBoun, Daejeon-Geumsan areas in the range of 500~3,700 cps (corresponds to 0.017~0.087%U). These zones continue along strike of the beds for several tens to a few hundred meters but also discontinue with swelling and pinches at places that should be analogously developed toward underground in their vertical extentions. The drilling surveyings in those area, more than 120 holes, indicate that the depth-frequency to uranium rich bed ranging 40~160 meter is greater. 4. The features that higher radioactive anomalies occur particularly from the carbonaceous beds among the argillaceous lithologic units, are well demonstrated on the cross sections of the lithology and radioactive values of the major uranium deposits in the Ogcheon zone. However, one anomalous radioactive zone is found in a l:ornfels bed in Samgoe, near Daejeon city. This is interpreted as a thermal metamorphic effect by which original uranium contents in the underlying black slate were migrated into the hornfels bed. 5. Principal minerals of the uranium-bearing black slates are quartz, sericite, biotite and chlorite, and as to chemical composition of the black slates, $Al_2O_3$ contents appear to be much lower than the average values by its clarke suggesting that the Changri basin has rather proximal to its source area. 6. The uranium-bearing carbonaceous beds contain minor amounts of phosphorite minerals, pyrite, pyrrhotite and other sulfides but not contain iron oxides. Vanadium. Molybdenum, Barium, Nickel, Zirconium, Lead, Cromium and fixed Carbon, and some other heavy metals appear to be positive by correlative with uranium in their concentrations, suggesting a possibility of their genetic relationships. The estimated pH and Eh of the slate suggests an euxenic marine to organic-rich saline water environment during uranium was deposited in the middle part of Ogcheon zone. 7. The Carboniferous shale of Jangseong Series(Sadong Series) of Permian in Hambaegsan area having low radioactivity and in fluvial to beach deposits is entirely different in geochemical property and depositional environment from the middle part of Ogcheon zone, so-called "Pibanryong-Type Ogcheon Zone". 8. Synthesizing various data obtained by several aspects of research on uranium mineralization in the studied sequence, it is concluded that the processes of uranium deposition were incorporated with rich organic precipitation by which soluble uranyl ions, $U{_2}^{+{+}}$ were organochemically complexed and carried down to the pre-Ogcheon sea bottoms formed in transitional environment, from Red Sea type basin to Black Sea type basin. Decomposition of the organic matter under reducing conditions to hydrogen sulfide, which reduced the $UO{_2}^{+2}$ ions to the insoluble uranium dioxide($UO_2$), on the other side the heavy metals are precipitated as sulfides. 9. The EPMA study on the identification of uraninite and others and the genetic interpretation of uranium bearing slates by isotopic values of this work are given separately by Yun, S. in 1984.

  • PDF