• Journal of Families and Better Life
• /
• v.8 no.1
• /
• pp.101-113
• /
• 1990

Apartment houses are repidly being assimialated into the Korean lifestyle. Little study of space utilization and specificially built-in storage needs has been implemented into design of these apartment units. The purposes of this study were, first, to ascertain attitudes of a select group of Korean housewives(N=250) living in apartments in Seoul toward closets and built-in storage units, and second, to determine the acceptability of proposed alternative plans which include built-in storage facilities by Korean women(N=31) living in the United States. Overall results reflect that built-in closets and storage are highly prized and additional units required in Korean apartment plans. Of the respondents, about 86% thought portable storage bought at marirage would be phased out if more storage was built into Korean apartmemts. Most Korean housewives would perceive the advantages of built-in storage units, and would prefer differentiated built-in storage units to undifferentiat d ones. Yet attitudes were equally split on the aesthetic value of the elimination of the portable storage. Five Korean apartment plans were drawn to scale then altered through the incorporation of additional built-in storage. These altered plans all received greater then 83% preferences to the existing Korean apartment plans. Additional study needs to be undertaken to address the implementation of additional storage in existing units as well as impact the current space planning concepts related to more built-in storage. Consideration needs to be given to the concerns related to aesthetic value of portable units as part of the study process.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04b
• /
• pp.14-16
• /
• 2008

Built-in voltage in organic light-emitting diodes was studied using modulated photocurrent technique ambient conditions. From the bias voltage-dependent photocurrent, built-in voltage of the device is determined. The applied bias voltage when the magnitude of modulated photocurrent is zero corresponds to a built-in voltage. Built-in voltage in the device is generated due to a difference of work function of the anode and cathode. A device was made with a structure of anode/$Alq_3$/cathode to study a built-in voltage. ITO was used as an anode, and Al and LiAl were used as a cathode. A layer thickness of Al and LiAl were 100nm. Obtained built-in voltage is about 1.0V in the Al layer was used as a cathode. The obatined built-in voltage is about 1.6V in the LiAl layer was used as a cathode. The result of built-in voltage is dependent of cathode. We can see that the built-in voltage increase up to 0.4V when the LiAl layer was used as the cathode. These results correspond to the work function of LiAl which is lower than that of Al. As a result, the barrier height for an electron injection from the cathode to the organic layer could be lowered when the LiAl was used as a cathode.

• Steel and Composite Structures
• /
• v.33 no.1
• /
• pp.37-66
• /
• 2019

In cold-formed steel structures, such as trusses, wall frames and portal frames, the use of back-to-back built-up cold-formed stainless-steel lipped channels as compression members are becoming increasingly popular. The advantages of using stainless-steel as structural members are corrosion resistance and durability, compared with carbon steel. The AISI/ASCE Standard, SEI/ASCE-8-02 and AS/NZS do not include the design of stainless-steel built-up channels and very few experimental tests or finite element analyses have been reported in the literature for such back-to back cold-formed stainless-steel channels. Current guidance by the American Iron and Steel Institute (AISI) and the Australian and New Zealand (gAS/NZS) standards for built-up carbon steel sections only describe a modified slenderness approach, to consider the spacing of the intermediate fasteners. Thus, this paper presents a numerical investigation on the behavior of back-to-back cold-formed stainless-steel built-up lipped channels. Three different grades of stainless steel i.e., duplex EN1.4462, ferritic EN1.4003 and austenitic EN1.4404 have been considered. Effect of screw spacing on the axial strength of such built-up channels was investigated. As expected, most of the short and intermediate columns failed by either local-global or local-distortional buckling interactions, whereas the long columns, failed by global buckling. All three grades of stainless-steel stub columns failed by local buckling. A comprehensive parametric study was then carried out covering a wide range of slenderness and different cross-sectional geometries to assess the performance of the current design guidelines by AISI and AS/NZS. In total, 647 finite element models were analyzed. From the results of the parametric study, it was found that the AISI & AS/NZS are conservative by around 10 to 20% for cold-formed stainless-steel built-up lipped channels failed through overall buckling, irrespective of the stainless-steel grades. However, the AISI and AS/NZS can be un-conservative by around 6% for all three grades of stainless-steel built-up channels, which failed by local buckling.

• Journal of Korea Spatial Information System Society
• /
• v.10 no.4
• /
• pp.37-45
• /
• 2008

Increased demand for the latest spatial information, it is necessary to study the complement current map updating systems for responding the diverse environment of the national territory information. This study suggests the way to update 1/5,000 digital maps with the application of as-built drawings based on current systems. This study compares current as-built drawings with digital maps, and consider intra and international related cases and regulations. This study also selects case areas based on different types of as-built drawings and updates digital maps with the application of as-built drawings. After the consideration of systems and regulations related to as-built drawings, the research results, including the improvement and the application of as-built drawings, are presented. It is expected that the foundation to provide more rapid and accurate geographic information can be achieved from the research result.

• Steel and Composite Structures
• /
• v.28 no.2
• /
• pp.233-250
• /
• 2018

Back-to-back built-up cold-formed steel un-lipped channel sections are used in cold-formed steel structures; such as trusses, wall frames and portal frames. In such built-up columns, intermediate fasteners resist the buckling of individual channel-sections. No experimental tests or finite element analyses have been reported in the literature for back-to-back built-up cold-formed steel un-lipped channel sections and specially investigated the effect of screw spacing on axial strength of such columns. The issue is addressed in this paper. The results of 95 finite element analyses are presented covering stub to slender columns. The finite element model is validated against the experimental tests recently conducted by authors for back-to-back built-up cold-formed steel lipped channel sections. The verified finite element model is then used for the purposes of a parametric study to investigate the effect of screw spacing on axial strength of back-to-back built-up cold-formed steel un-lipped channel sections. Results are compared against the built-up lipped channel sections and it is shown that the axial strength of un-lipped built-up sections are 31% lesser on average than the built-up lipped channel sections. It was also found that the American Iron and Steel Institute (AISI) and the Australian and New Zealand Standards were over-conservative by around 15% for built-up columns failed through overall buckling, however AISI and AS/NZS were un-conservative by around 8% for built-up columns mainly failed by local buckling.

• Journal of the Korea Furniture Society
• /
• v.29 no.1
• /
• pp.31-39
• /
• 2018

Recently, as the continuously increasing of the one-person households, builders were focusing on a built-in furniture development for efficiency. Through the dead space of the space can be reduced. Also, Condensation that occurs in a built-in furnitures installation space may result in different results depending on the room's direction, floor, finish, adjacent room effect, occupant's lifestyle. In this background, it can be considered in terms of functional aspect and morphological aspect by using WUFI2D simulation system. As a result, the tendency of occurrence of condensation was examined by comparing the water content and the growth potential of fungus graph which came from WUFI2D. Results of this study are as followings: Built-in furniture, both top & bottom open, is more stable to condensation than the built-in furniture with the top or bottom open. Also, Among from the top floor built-in furniture to the bottom of it, the bottom one is more stable to condensation.

• KIEAE Journal
• /
• v.10 no.1
• /
• pp.97-107
• /
• 2010

Although aspiration towards quality of life and holistic health has been growing faster in our modern society and the affordance of health in built environment has been more acknowledged, there has been hardly any development on built environment planning and design theory that can be comfortably and confidently used in creating built environment to promote holistic health. Thereby, this study sets out to experimently formulate a composite theory that explains the relationship between health and built environment. The main methodology of this study is literature review and analysis. Theories that have been applied in other similar fields were chosen to be analyzed by health related perspectives and graft those theories onto holistic health viewpoints to compose a comprehensive theory. Selected theories that were considered useful to be analyzed were Lawton's Environment Press Theory, Carp & Carp's Complementary & Congruence Theory, Valins' Activity-based Design Criteria Theory, Atchley's Continuity Theory, Murtha & Lee's User Benefit Criteria Theory, and Alexander's Pattern Language Theory. Characteristics of these theories were compared by their abstractness and concreteness, and the range of application, and analyzed by a holistic health perspective. Then, these theories were comprehensively structuralized and synthesized as a built environment for health theory. This study has its significance in providing a base to develop healthy built environment research further as it introduced a conceptual framework which explains spatial elements in the health functionality point of view.

• Advances in Computational Design
• /
• v.5 no.2
• /
• pp.127-146
• /
• 2020

Building Information Modeling (BIM) is increasingly used throughout the facility's life cycle for various applications, such as design, construction, facility management, and maintenance. For existing buildings, the geometry of as-built BIM is often constructed using dense, three dimensional (3D) point clouds data obtained with laser scanners. Traditionally, as-built BIM systems do not contain the material and textural information of the buildings' elements. This paper presents a semi-automatic method for generation of material and texture rich as-built BIM. The method captures and integrates material and textural information of building elements into as-built BIM using thermal infrared sensing (TIS). The proposed method uses TIS to capture thermal images of the interior walls of an existing building. These images are then processed to extract the interior walls using a segmentation algorithm. The digital numbers in the resulted images are then transformed into radiance values that represent the emitted thermal infrared radiation. Machine learning techniques are then applied to build a correlation between the radiance values and the material type in each image. The radiance values were used to extract textural information from the images. The extracted textural and material information are then robustly integrated into the as-built BIM providing the data needed for the assessment of building conditions in general including energy efficiency, among others.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.9
• /
• pp.462-474
• /
• 2001

In this paper, Generalized Differential Quadrature Method is applied to the buckling analysis of built-up columns without or with stay plates. numerical analysis using GDQM is carried out for various boundary conditions(simply supported conditions, fixed conditions, fixed-simply supported conditions), dimensionless stiffness parameter and dimensionless inertia moment parameter. The accuracy and convergence of solutions are compared with exact solutions of Gjelsvik to validate the results of GDQM. Results obtained by this method are as follows. 91) This method can yield the accurate numerical solutions using few grid points. (2) The buckling load of built-up column increases as the dimensionless stiffness parameter decreases. (3) The effects of boundary conditions on the buckling load are not considerable as the dimensionless stiffness parameter increases. (4) The buckling load of built-up column increases due to the stay plate.

• Journal of Families and Better Life
• /
• v.5 no.2
• /
• pp.99-107
• /
• 1987

The purpose of this study is to examine the remodeling behavior on the apartment built in furniture. The data were collected from 363 residents in Seoul area, living in apartments equipped with built-in furnitures. The major findings are as follows; 1)It was found out that 62-75% of those surveyed did not remodel their built-in furniture and 25-39% remodeled it. The major reasons for remodeling are the inconvenience in storing household items, lack of storage space and dissatisfaction of the design and color. 2)More than 80% of the apartment residents surveyed recognizes the necessity of the built-in furnitures, which were equipped already, in living room, kitchen, bathroom and the entrance area. A strong need is also indicated for the additional built-in furnitures in each bedroom, multi-service room and veranda. 3) This survey also indicated that 63-73% shows no intention of remodeling their built-in furnitures. On the other hand, 27-37% of those surveyed indicates their desire and plan to remodel them.