• 한국환경과학회지
• /
• 제18권4호
• /
• pp.473-478
• /
• 2009

The removal characteristics of total petroleum hydrocarbons (TPHs) and heavy metals in contaminated soils with ultrasonic washing have been studied. The ultrasonic washing was evaluated on a laboratory scale. In this investigation, the effects of factors such as ultrasonic frequency, power intensity, duration of irradiation, contents of the TPHs and heavy metals and mixing ratios between the contaminated soils and water, were considered. Experimental results suggested that the rates for contaminant extraction of the TPHs and heavy metals in the contaminated soil increased considerably with the ultrasonic washing. Therefore, the ultrasonic washing has previously been to be an effective method to remediate the contaminated soils with the TPHs and heavy metals.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제22권1호
• /
• pp.13-17
• /
• 2017

Over 30% of domestic soil contamination has occurred via petroleum products and complex oil. Moreover, contamination by complex oil is more intense than it is by a single petroleum product species. In this study, we analyzed sectional TPH (total petroleum hydrocarbon) pattern and sectional ratio of current domestically distributed petroleum products, such as kerosene, diesel, bunker C, and lubricant and complex oils, to determine pollution characteristics of the soil. In the TPH pattern, kerosene, which is a light distillate, had an early retention time, and lubricant oil, which is a heavy distillate, had a late retention time in the gas chromatogram. In addition, we obtained a complexly contaminated soil via diesel and lubricant oil from the Navy and inspected it for its ratio of complex oil species. The inspection results showed that this soil was contaminated with 85% diesel and 15% lubricant oil. The method developed in this study could be used to determine complex petroleum sources and ratios at sites with accidentally contaminated soil.

• 한국환경과학회지
• /
• 제17권5호
• /
• pp.479-484
• /
• 2008

The application of microwave technology has been investigated in the remediation of diesel-contaminated soil. The paper deals with economic assessment by means of cost analysis and degradation characteristics at different microwave powers for total petroleum hydrocarbon (TPH) in diesel contaminated soils. The soils from S Mountain around the D University were sampled. The samples were screened with 2.0 mm mesh and dried for 6 hours before the diesel was added into the dried soils. The diesel-contaminated soil (3,300 mg THP/kg soil) was prepared with diesel (S Co.). The drying process was carried out in a microwave oven, a standard household appliance with a 2,450 MHz frequency and 700 W of power. The experiments were conducted from 0 to 20 minutes as the microwave powers increased from 350W to 500W to 700W. The concentrations of TPH were analysed using a gas chromatography/mass spectrometer (GC/MS). The initial concentration of TPH was 3,300 mg TPH/kg soil. The weight of contaminated soil was 200g. The concentration of TPH was decreased to 1,828 mg TPH/kg soil (44.7%), 1,347 mg TPH/kg soil (59.2%) and 1,014 mg TPH/kg soil (69.3%) at 350W, 500W and 700W for 15 minutes respectively. In addition, the curve was best fit with first order kinetics using the least-square method. The ranges of a first order rate constant k and r-square were $0.0298{\sim}0.0375min^{-1}$ and $0.9373{\sim}0.9541$ respectively.

• Environmental Engineering Research
• /
• 제24권3호
• /
• pp.484-494
• /
• 2019

This paper presents a preliminary investigation of the optimum nutrients combination required for bioremediation of spent-engine oil contaminated soil using Box-Behnken-Design. Three levels of cow-manure, poultry-manure and inorganic nitrogen-phosphorus-potassium (NPK) fertilizer were used as independent biostimulants variables; while reduction in total petroleum hydrocarbon (TPH) and total soil porosity (TSP) response as dependent variables were monitored under 6-week incubation. Ex-situ data generated in assessing the degree of biodegradation in the soil were used to develop second-order quadratic regression models for both TPH and TSP. The two models were found to be highly significant and good predictors of the response fate of TPH-removal and TSP-improvement, as indicated by their coefficients of determination: $R^2=0.9982$ and $R^2=1.000$ at $p{\leq}0.05$, respectively. Validation of the models showed that there was no significant difference between the predicted and observed values of TPH-removal and TSP-improvement. Using numerical technique, the optimum values of the biostimulants required to achieve a predicted maximum TPH-removal and TSP-improvement of 67.20 and 53.42%-dry-weight per kg of the contaminated soil were as follows: cow-manure - 125.0 g, poultry-manure - 100.0 g and NPK-fertilizer - 10.5 g. The observed values at this optimum point were 66.92 and 52.65%-dry-weight as TPH-removal and TSP-improvement, respectively.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권5호
• /
• pp.1-7
• /
• 2010

Electrokinetic technology was applied to remediate Cu, Pb and As-contaminated paddy soil. Removal of metal is highly dependent on the processing fluid during electrokinetic treatment. Tap water, NaOH, $HNO_3$, $Na_2EDTA$, and citric acid were evaluated as the processing fluids to enhance metal removal. Cu and Pb were transported toward cathode, however, it did not removed from soil section, while 56.6% of As was removed at a acidic condition. The strong acidic condition with nitric acid as a processing fluid enhanced the desoprtion of As from soil surface. However, longer operation time is needed to get the higher removal of Cu and Pb, and the acidification of soil after electrokinetic treatment should be solved.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제25권4호
• /
• pp.1-6
• /
• 2020

Recently, ex-situ remediation technologies has been emerging to clean up contaminated soils mainly because the in-situ techniques have limited applicability and technical difficulties in relatively small contaminated sites. Accordingly, implementation of off-site treatment and disposal have been continuously increased in soil remediation and restoration projects in Korea. However, in many cases, reclaimed soil is still not properly recycled or reused. Therefore, there is an urgent need to document the current status of soil management practices in soil remediation projects in the nation. This study presents a survey of soil contamination status and remedial approaches in Korea based on soil cleanup projects completed in 2015 - 2019, and proposes the possible options of the recycling or reusing the reclaimed soils under compliance with related regulations. The results of the soil survey showed soil contamination was most severe in gas stations, industrial facilities, and military areas. The major types of pollution were related to the petroleum-contaminated site (TPH and BTEX) with 77.0% occurrence in all the contaminated sites. The reclaimed soils were mostly reused as a ground filling-up soils in industrial facilities (60.0%) and warehouses (37.0%).

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1843-1845
• /
• 2007

As the preservation law of soil environment has reinforced, several soil remediation projects have been performing for railroad sites. One of the main sources of soil contamination is the leakage of diesel from locomotives or underground storage tank. Also, the lubricant used to maintain turnouts causes railroad soil contamination. The purpose of this study was to develop the analysis and the remediation method for lubricant-contaminated soil. The lubricant in the contaminated soil was analyzed qualitatively and quantitatively by TLC (Thin Layer Chromatography) and GC (Gas Chromatography), respectively. The organic pollutants were removed from the soil using microorganisms degrading lubricant. Hereafter it will be necessary to apply this bioremediation method in the railroad field.

• 한국물환경학회지
• /
• 제22권5호
• /
• pp.871-878
• /
• 2006

Batch experiments were performed to evaluate the applicability of soil washing for heavy metal contaminated soils at Nacdong and Hamchang abandoned mines. The texture of the Nacdong soil was sandy loam. Nacdong abandoned mine soil was almost neutral (pH=6.5). Contaminations of As, Cd, Pb and Zn for Nacdong mine soils were 12,900 mg/kg, 29 mg/kg, 696 mg/kg and 276 mg/kg, respectively. Hamchang abandoned mine soils were acidic (pH=2.6) and the soil texture was loam. The contaminations of As, Cd, Pb and Zn for Hamchang abandoned mine soils were 6,410 mg/kg, 291 mg/kg, 1,300 mg/kg and 1,110 mg/kg, respectively. For the Nacdong abandoned mine soils, oxalic acid was found to be the most effective soil washing extracter for As and Pb while citric acid was the most effective extracter for Cd. For the Hamchang abandoned mine soils, oxalic acid showed the highest extraction efficiencies for As and Pb, whilst citric acid presented the best soil washing efficiencie for Cd. Oxalic acid and EDTA were found to be the most effective soil washing extracter for the Hamchang abandoned mine contaminated soils.

• 한국토양비료학회지
• /
• 제47권6호
• /
• pp.491-495
• /
• 2014

Phytoremediation is a technology using plants and associated soil microbes to reduce the concentrations or toxic effects of contaminants in the environments. It is regarded as a cost-effective, efficient, eco-friendly, and solar-driven technology with good public acceptance. This study was conducted to find the plants accumulating heavy metals in soils contaminated with Cd and Pb. Experimental plots (plot size: $0.81m^2$) was artificially contaminated using a contaminated soil collected from a field in vicinity of Wondong mine (WD). Sunflower, corn and castor were tested for their potential to remove heavy metals from the contaminated soils. The results indicated that sunflower was most effective in accumulating heavy metals and thus remedying the soils among the three crops. Dry weight and heavy metal uptake of sunflower shoot differed with growth period. For example, the Cd content of shoots including leaf and stem were 0.31mg, 2.23 mg, and 0.96 mg per plot at 4, 8 and 12 weeks after planting in Cd4-WD treatment; in addition, the dry weight of the shoots in Cd8-WD treatment was reduced due to heavy metal toxicity. This experiment showed that sunflower absorbed Cd, Pb and Zn in their shoots up to 8 weeks of planting; thereafter heavy metals uptake was diminished. This implies that the efficiency of these plants in cleaning the contaminated soils may be high at the early stage of plant growth.

• 한국응용과학기술학회지
• /
• 제21권4호
• /
• pp.313-319
• /
• 2004

Ethanol washing with distillation as a cleanup process of polycyclic aromatic hydrocarbon(PAH)-contaminated soil was investigated in this study. A multistage ethanol washing with distillation process was applied to three different types of soil, i.e., sandy soil, alluvial soil, and clay with the initial concentration of benzo(a)pyrene 10 mg/kg, benz(a)anthracene 250 mg/kg, and pyrene 100 mg/kg soil. Ethanol was selected as washing solvent because of its high PAH removal efficiency, low cost, and non-toxicity comparing to the other solvent such as isopropyl alcohol and sodium dodecyl sulfate. The satisfactory results (i.e. lower than benzo(a)pyrene 1 mg/kg, pyrene 10 mg/kg, benz(a)anthracene 25 mg/kg, which are the Canada or the Netherlands soil standard) for three types of soils were obtained by at most five-six times washing. It was suggested that organic content in soil decreased the removal efficiency by ethanol washing.