• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.5
• /
• pp.313-319
• /
• 2018

This study introduces a new investigation report on the microstructural and electrical property changes of $ZnO-Zn_2BiVO_6-Mn_3O_4$ (ZZMn), where 0.33 mol% of $Mn_3O_4$ and 0.5 mol% of $Zn_2BiVO_6$ were added to ZnO (99.17 mol%) as liquid phase sintering aids. $Zn_2BiVO_6$ contributes to the decrease of sintering temperatures by up to $800^{\circ}C$, and segregates its particles at the grain boundary, while $Mn_3O_4$ enhances ${\alpha}$, the nonlinear coefficient, of varistor properties up to ${\alpha}=62$. In comparison, when the sintering temperature is increased from $800^{\circ}C$ to $1,000^{\circ}C$, the resistivity of ZnO grains decreases from $0.34{\Omega}cm$ to $0.16{\Omega}cm$, and the varistor property degrades. Oxygen vacancy ($V_o^{\bullet}$) (P1, 0.33~0.36 eV) is formed as a dominant defect. Two different kinds of grain boundary activation energies of P2 (0.51~0.70 eV) and P3 (0.70~0.93 eV) are formed according to different sintering temperatures, which are tentatively attributed to be $ZnO/Zn_2BiVO_6$-rich interface and ZnO/ZnO interface, respectively. Accordingly, this study introduces a progressive method of manufacturing ZnO chip varistors by way of sintering ZZMn-based varistor under $900^{\circ}C$. However, to procure a higher reliability, an in-depth study on the multi-component varistors with double-layer grain boundaries should be executed.

• Journal of Magnetics
• /
• v.8 no.4
• /
• pp.129-132
• /
• 2003

We investigated the crystallographic and magnetic properties of double perovskite $Sr_2Fe_{l-x}Cr_{x}MoO_{6}$ (x=0.0, 0.01, 0.03, 0.05, and 0.10). Mossbauer spectra of the $Sr_2Fe_{l-x}Cr_{x}MoO_{6}$ have been taken at various temperatures ranging from 15 to 415 K. As the temperature increased towards $T_{c}$(415 K), the Mossbauer spectra showed line broadening and 1, 6 and 3, 4 line-width differences because of anisotropic hyperfine field fluctuation. The Mossbauer spectra indicated that an anisotropic field fluctuation of +H ( $P_{+}$=0.85) was greater than that of -H ($P_{-}$=0.15). We also calculated the field fluctuation frequency factors and the temperature dependence of anisotropy energies from its relaxation rate. We interpreted the effect of Cr ($t^3$$_{2g}$) doping as a decrease in the anisotropy energy.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.6
• /
• pp.445-448
• /
• 2011

In this study, the etching characteristics of $Al_2O_3$ thin films were investigated using an ICP (inductively coupled plasma) of $BCl_3$/Ar gas mixture. The etch rate of $Al_2O_3$ thin films as well as the $SiO_2/Al_2O_3$ etch selectivity were measured as functions of $BCl_3$/Ar mixing ratio (0~100% Ar) at a constant gas pressure (10 mTorr), total gas flow rate (40 sccm), input power (800 W) and bias power (100 W). The behavior of the $Al_2O_3$ etch rate was shown to be quite typical for ion-assisted etch processes with a dominant chemical etch pathway. To analyze the etching mechanism using DLP (double langmuir probe), OES (optical emission spectroscopy) and surface analysis using XPS (x-ray photoelectron spectroscopy) were carried out.

• Analytical Science and Technology
• /
• v.28 no.3
• /
• pp.182-186
• /
• 2015

In this study, the porous CuO/MnO₂ catalyst was prepared through the co-precipitation process from an aqueous solution of potassium permanganate (KMnO₄), manganese(II) acetate (Mn(CH₃COO)₂·4H₂O) and copper(II) acetate (Cu(CH₃COO)₂·H₂O). The phase change in MnO₂ was analyzed according to the reaction molar ratio of KMnO₄ to Mn(CH₃COO)₂. The reaction mole ratio of KMnO₄ to Mn(CH₃COO)₂·4H₂O was varied at 0.3:1, 0.6:1, and 1:1. The aqueous solution of Cu(CH₃COO)₂ was injected into a mixed solution of KMnO₄ and Mn(CH₃COO)₂ to 10~75 wt% relative to MnO₂. The Cu ion co-precipitates as CuO with MnO₂ in a highly dispersed state on MnO₂. The physicochemical property of the prepared CuO/MnO₂ was analyzed by using the TGA, DSC, XRD, SEM, and BET. The different phase types of MnO₂ were prepared according to the reaction mole ratio of KMnO₄ to Mn(CH₃COO)₂·4H₂O. The results confirmed that the porous CuO/MnO₂ catalyst with γ-phase MnO₂ was produced in the reaction mole ratio of KMnO₄ to Mn(CH₃COO)₂ as 0.6:1 at room temperature.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.6
• /
• pp.499-503
• /
• 2002

In this study, to develop the high power piezoelectric transformer for adaptor, PSN-PNN-PZT system ceramics were formulated as a function of $MnO_2$ addition and its dielectric and piezoelectric characteristics were investigated. Multi-layer piezoelectric transformer using an excellent composition was also fabricated and its electrical properties evaluated. The composition ceramics added to 0.5wt%$MnO_2$ showed the maximum value of $k_p=0.61$ and $Q_m=1.321$. As the output power of piezoelectric transformer is increased, its temperature rise increased. At the fixed 18W output power, the transformer was stably operated.

• Composites Research
• /
• v.32 no.6
• /
• pp.355-359
• /
• 2019

The high efficient water splitting system should involve the reduction of high overpotential value, which was enhanced by the electrocatalytic reaction efficiency of catalysts, during the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) reaction, respectively. Among them, transition metal-based compounds (oxides, sulfides, phosphides, and nitrides) are attracting attention as catalyst materials to replace noble metals that are currently commercially available. Herein, we synthesized optimal monodisperse Co₃[Co(CN)₆]₂ PBAs by FESEM, and confirmed crystallinity by XRD and FT-IR, and thermal behavior of PBAs via TG-DTA. Also, we synthesized monodispersed Co₃O₄ nanocubes by calcination of Co₃[Co(CN)₆]₂ PBAs, confirmed the crystallinity by XRD, and proceeded OER measurement. Finally, the synthesized Co₃O₄ nanocubes showed a low overpotential of 312 mV at a current density of 10 mA·cm^-2 with a low Tafel plot (96.6 mV·dec^-1).

• Journal of the Korean Ceramic Society
• /
• v.49 no.6
• /
• pp.663-668
• /
• 2012

In order to reduce the indium contents in transparent conducting oxide(TCO) thin films of $In_{1.6{\sim}1.8}Zn_{0.2}Sn_{0.2{\sim}0.4}O_3$ (IZTO), $In_{1.6}Zn_{0.2}Sn_{0.2}O_{3-{\delta}}$(IZTO) was prepared by replacing indium with Zn and Sn. The TCO films were deposited via RF-magnetron sputtering of the IZTO target at various deposition temperatures and its film characteristics were investigated. When deposited in an Ar atmosphere at $400^{\circ}C$, the electrical resistivity of the film decreased to $6.34{\times}10^{-4}{\Omega}{\cdot}cm$ and the optical transmittance was 80%. As the deposition temperature increased, the crystallinity of the IZTO film was enhanced. As a result, the electrical conductivity and transmittance properties were improved. This demonstrates the possibility of replacing ITO TCO film with IZTO.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.2
• /
• pp.365-372
• /
• 2002

The mineral medicines mean a sort of mineral or rock for medical treatment and natural material using their chemical components and physical properties. In this study, it was apprehended the mineralogical characteristics of As-bearing group mineral medicines. The extraction test is an vitro test system for predicting the bioavailability of the major and minor elements from mineral medicines and incorporates gastrointestinal tract parameters representative of a human(including stomach and small intestinal pH, stomach mixing time and velocity). The results of the extraction test are used for reaction path modeling in human body. Reaction path modeling in human body can predict digestion with gastric juice as well as bioavailability, speciation. Also, it can predict accumulation of arsenic as pH condition. As the results of the extraction test for digestion, the amounts of Fe extraction was the highest, followed by As, Ca, Ni. In addition, as the results of the reaction path modeling between arsenic compounds and gastric juice using thermodynamic data, when absorbed, major species are followed by H₃As₃S/sub 6/(aq), As₃S/sub 6/ (aq), AsO/sup +/, H₂As₃S/sup 6-/, H₂AsO/sup 3-/, HAs₃S6/sup 2-/, HAsO/sub 3//sup 2-/ and AsO/sub 3//sup 3-/. Specifically the concentration of H₃As₃S/sub 6/(aq) is the highest. As pH increases, the concentration of H₂AsO/sup 3-/, HAsO/sub 3//sup 2-/, HAsO/sub 3//sup 3-/, HAs₃S/sub 6//sup 2-/, H₂As₃S/sup 6-/, and H₃As₃S/sub 6/ increases, whereas the concentration of H₃As₃S/sub 6/ and AsO/sup +/ decreases. On the results of this study, it is able to find out effective and toxic components of poisonous arsenic group of mineral medicines and expected to be widely used for the development of new medicines.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1297-1303
• /
• 2020

In this study, nuclear radiation shielding and rigidity parameters of Y (0.1-x)B0.6Bi1.8O3La2x glassy system were investigated in order to determine it's suitability for use as nuclear radiation shielding materials. Therefore, a group of bismuth borate glass samples with La₂O₃ additive were synthesized using the technique of melt quenching. According to the results, the increase of the La₂O₃ additive increases the density of the glass samples and the mass attenuation coefficient (μ_m) values, whereas the half-value layer (HVL) and mean free path (MFP) values decrease. The effective atomic number (Z_eff) is also enhanced with an increment of both mass removal cross section for neutron (Σ_R) and absorption neutron scattering cross section (σ_abs). In addition to the other parameters, rigidity parameter values were theoretically examined. The increase of La₂O₃ causes some other important magnitudes to increase. These are the average crosslink density, the number of bonds per unit volume, as well as the stretching force constant values of these glass samples. These results are in concordance with the increase of elastic moduli in terms of the Makishima-Mackenzie model. This model showed an increase in the rigidity of the glass samples as a function of La₂O₃.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.9
• /
• pp.1463-1466
• /
• 2007

Single phases of multi-component oxides films, ZrTiO4 and Ta2Zr6O17, could be synthesized by using the combinatorial approach through surface sol-gel route, coating the appropriate mole ratio of 100 mM zirconium butoxide, tantalum butoxide and titanium butoxide precursors on Pt/Ti/SiO2/Si (100) substrate, following pyrolysis at 450 oC, and annealing them at 770 oC. Both the films and bulks of ZrTiO4 and Ta2Zr6O17 showed very stable dielectric properties in temperature range, ?140 to 60 oC, and frequency range, 100 Hz to 1 MHz, promising their applications in wide range of temperatures and frequencies. The dielectric constants of the films were lower and a little more dependent on frequency than those of the bulks. The reduction of dielectric property in the film was mainly due to the interfacial effects that worked as series and parallel-connected capacitances toward the substantial film capacitance.