• 한국화재소방학회논문지
• /
• 제25권2호
• /
• pp.107-113
• /
• 2011

차동식 스포트형 공기 팽창식 열감지기를 인위적으로 높은 온도에서 가속열화시켜 경년변화되는 특성에 대하여 연구하였다. 이 연구는 현장에 설치된 감지기가 화재 또는 점검기기에 의한 고온의 열에 노출되었을 경우에 감지기의 동작에 미치는 영향을 분석하기 위하여 실험하였다. 실험결과 현장에서 5년 동안 사용되었던 2005년 B사 감지기는 $100^{\circ}C$의 온도에서 1시간 동안 노출되었을 경우에 감지기가 동작하지 않는 경우가 발생하였다. 이것은 감지기 감열실내의 팽창된 공기가 리크공 이외의 곳에서 리크 되었기 때문인 것으로 판단된다. 그러나 감지기의 동작표시를 나타내는 LED는 온도가 $160^{\circ}C$까지 올라갔음에도 불구하고 모두 정상적으로 동작하였다. 따라서 동작표시 LED의 회로소자는 고장은 발생하지 않았음을 알 수 있었다.

• 한국농림기상학회지
• /
• 제8권1호
• /
• pp.10-14
• /
• 2006

노화 처리를 이용하여 리기다소나무 종자의 활력을 평가하고, 적정 노화 처리 기간 및 온도를 결정하고자 하였다. 리기다소나무 종자의 활력은 노화 처리 기간과 온도에 큰 영향을 받았으며, 노화 처리가 진행되는 동안 종자 발아율과 종자 활력은 크게 감소하였다. 리기다소나무 종자의 노화 지수는 $35^{\circ}C$에서 0.31이었으며, $40^{\circ}C$에서 15일 동안 노화 처리한 종자는 활력을 완전히 상실하였다. 노화 지수를 기준으로 한, 리기다소나무 종자의 노화 처리 최적 온도는 대략 $37^{\circ}C$ 부근으로 판단되었다. 노화 처리된 종자로부터 빠져나온 용출액을 분석한 결과, 용출액내 무기물과 전기전도도는 노화 기간이 증가함에 따라 증가하였다. 노화 처리 시험은 수목 종자의 활력을 평가하는데 매우 적절한 방법으로 판단되었으나, 수종에 따라 종자 특성이 매우 다르므로 다양한 수종에 대해 노화 처리의 최적 조건을 찾기 위해서 더 많은 연구가 필요하다.

• 대한기계학회논문집A
• /
• 제28권12호
• /
• pp.1968-1973
• /
• 2004

Structural degradations are often experienced on the components of nuclear power plants in reactor pressure vessels (RPV) and steam generators (SG) when these components are exposed to high temperature and high pressure for a long period of time. Such conditions result in the change of microstructures and of mechanical properties of materials, which requires an evaluation of the safeguards related to structural integrity. In a primary reactor cooling system (RCS), a dissimilar weld zone exists between cast stainless steel (CF8M) in a pipe and low-alloy steel (SA508 cl.3) in a nozzle. Thermal aging is observed in CF8M as the RCS is exposed for a long period of time under the operating temperature between 290 and 33$0^{\circ}C$. Under the same conditions, it is well known that degradation is not observed in low alloy steel. An investigation of the effect of thermal aging on the various mechanical properties of the dissimilar weld zone is required. The purpose of the present investigation is to find the effect of thermal aging on the dissimilar weld zone. The specimens are prepared by an artificially accelerated aging technique maintained for various times at 43$0^{\circ}C$, respectively. Then, The various mechanical test for the dissimilar welds are performed.

• 한국작물학회지
• /
• 제59권4호
• /
• pp.406-412
• /
• 2014

The influence of rainfall during the ripening stage on pre-harvest sprouting, seed viability, and seed quality was investigated in two Korean rice cultivars, Shindongjin and Hopum. When the rainfall was artificially treated in a greenhouse, HP started to pre-harvest sprouting at three days of rainfall treatment (DRT), but Shindongjin did not show pre-harvest sprouting at 40 DAH treatment and just 0.3~0.8% at 50 DAH, which was much lower than 15.3~25.8% of Hopum in the same treatment. After harvest, the seed germination of Hopum decreased about 10~25% compared to non-treated seeds, but that of Shindongjin decreased much little rate than that of Hopum. The seed longevity tested by accelerated aging decreased with prolonged rainfall period in both cultivars, but the varietal difference was clear; Shindongjin could withstand longer accelerated aging than Hopum. Shindongjin maintained its germination (>50%) ability after 15 days of accelerated aging regardless of the rainfall treatment period and time, but Hopum dropped below 50% germination ability after only 5 days of accelerated aging. In conclusion, rainfall during the ripening stage induced not only pre-harvest sprouting, but also reduced seed quality and longevity during storage, which varied between two cultivars.

• 한국화재소방학회논문지
• /
• 제25권4호
• /
• pp.48-55
• /
• 2011

차동식 스포트형 공기 팽창식 열감지기를 인공 가속열화 시켰을 때 발생하는 고장 원인에 대하여 분석하였다. 감지기에 고장이 발생하는 원인은 감열실 금속을 고정하는 접합재(binder)가 플라스틱 몰딩(moulding)에서 분리되어 발생하는 고장과, 감열실 금속과 다이어프램 금속을 고정하는 플라스틱 몰딩에 균열이 발생되는 고장으로 확인되었다. 고장이 발생하지 않은 감지기는 감열실 금속 및 다이어프램 금속이 플라스틱 몰딩에 접합재로 완전히 부착되어 있었다. 또한 2010G 감지기는 접합재의 기계적 강도를 향상시키기 위하여 접합재에 유리강화섬유가 추가되었음이 확인되었다. 감지기 종류별에 따른 플라스틱과 접합재의 밀도에는 큰 차이가 없었다. 그러나 감지기의 플라스틱에 대한 열중량분석(TGA) 결과, 제작년도는 같지만 제조회사가 다른 2005A와 2005B의 플라스틱 열적특성이 동일하지 않은 것으로 확인되었다.

• 한국작물학회지
• /
• 제48권4호
• /
• pp.334-338
• /
• 2003

The objective of this study was to demonstrate whether or not the deleterious effects of accelerated aging on seed vigour and viability are alleviated by interaction with gamma irradiation. Seeds of soybean (Glycine max L.) were artificially aged and subsequently irradiated with 4 and 8 Gy of gamma irradiation. Germination rate was negatively affected by accelerated aging and positively by gamma irradiation, with a positive interaction of a 3day-seed aging treatment occurring with 4 Gy, possibly suggesting that 4 Gy of gamma irradiation partially offset the adverse effects of seed aging on germination. However, 5-day aged seeds did not gain any benefits from the gamma irradiation. Electrolyte leakage from the seeds increased with the duration in days aged. Irradiation, however, did not impose any effects on the leakage. Respiration rate of the seed with hypocotyl and primary root was significantly low for the aged seeds, but not for the seeds with both irradiation and aging treatments. Accelerated aging decreased the dry weight of the hypocotyl and primary root of the seeds without any measurable effects of irradiation. $\alpha$-Amylase activity decreased with seed aging and positively responded to gamma irradiation. The data is discussed with regard to the possible roles of gamma irradiation for improving the seed vigour and viability of aged seeds.

• 펄프종이기술
• /
• 제47권6호
• /
• pp.66-72
• /
• 2015

This study was conducted to investigate the effects of optical brightening agents (OBA) on the chemical degradation characteristics of paper cellulose during humid heating aging. Three different types of OBAs were applied to a filter paper by dipping it in OBA solutions whose concentrations were controlled to 1% and 2%. The filter papers with an OBA were artificially aged at $80^{\circ}C$ and 65% RH, and the changes in pH of paper and viscosity of cellulose were evaluated. Their functional groups were also analyzed by ATR-FTIR (at-tenuated total reflectance fourier transform infrared spectroscopy). It was found that OBAs influenced the chemical degradation of paper cellulose during humid heating aging. Higher concentration of OBA solutions accelerated the degradation of paper cellulose. Especially, after aging for 12 days, the paper cellulose treated with the tetra-type OBA were the most significantly aged among the three types of OBAs. It was assumed that pH of OBA solutions affected the aging characteristics.

• 대한기계학회논문집A
• /
• 제30권10호
• /
• pp.1173-1178
• /
• 2006

In a primary reactor cooling system(RCS), a dissimilar weld zone exists between cast stainless steel(CF8M) in a pipe and low-alloy steel(SA508 cl.3) in a nozzle. Thermal aging is observed in CF8M as the RCS is exposed for a long period of time to a reactor operating temperature between 290 and $330^{\circ}C$, while no effect is observed in SA508 cl.3. The specimens are prepared by an artificially accelerated aging technique maintained for 300, 1800 and 3600 hrs at $430^{\circ}C$, respectively. The specimens for elastic-plastic fracture toughness tests are according to the process in the thermal notch is created in the heat affected zone(HAZ) of CF8M and deposited zone. From the experiments, the $J_{IC}$ value notched in HAZ of CF8M presented a rapid decrease up to 300 hours at $430^{\circ}C$ and slowly decreased according to the process in the thermal aging time. Also, the $J_{IC}$ value presented a lower value than that of the CF8M base metal. And, the $J_{IC}$ of the deposited zone presented the lowest value of all other cases.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.72-77
• /
• 2004

In a primary reactor cooling system(RCS), a dissimilar weld zone exists between cast stainless steel(CF8M) in a pipe and low-alloy steel(SA508 cl.3) in a nozzle. Thermal aging is observed in CF8M as the RCS is exposed for a long period of time to a reactor operating temperature between 290 and $330^{\circ}C$, while no effect is observed in SA508 cl.3. The specimens are prepared by an artificially accelerated aging technique maintained for 300, 1800 and 3600 hrs at $430^{\circ}C$, respectively. The specimens for elastic-plastic fracture toughness tests are prepared one type, which notch is created in the heat affected zone(HAZ) of CF8M. And, the specimens for fatigue crack growth tests are prepared in three classes, which notches are created at the center of deposited zone, the HAZ of CF8M, and the HAZ of SA508 cl.3. From the experiments, the J-integral values with the increase of aging time decrease, and the differences of the fatigue crack growth behaviors are relatively small in the three classes specimens.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.840-845
• /
• 2017

In this paper, in order to investigate the lifetime of oil-paper insulation, specimens were artificially aged with thermal and electrical multiple stresses. Accelerated ageing factors and equivalent operating years for each aging temperatures were derived from results of tensile strengths for the aged paper specimens. Also, the evaluation for the multi-stress aged specimens were carried out through the measurement of impulse breakdown voltage at high temperature of $85^{\circ}C$. The lifetimes of the oil-paper insulations were calculated with the value of 66.7 for 1.0 mm thickness specimens and 69.7 for 1.25 mm thickness specimens throughout the analysis of impulse BD voltages using equivalent operating years, which means that dielectric strengths would not be severely decreased until the mechanical lifetime limit. Therefore, for the lifetime evaluation of the oil-paper insulation, thermal aging would be considered as a dominant factor whereas electrical degradation would be less effective.